MARPOL Annex Equipment
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
vessel owners in line with the latest legislation. The Energy Efficiency Design Index (EEDI) and the Ship Energy Efficiency Management Plan (SEEMP) requirements were made legally binding by the MARPOL Annex VI, the first climate change treaty to be adopted since the Kyoto Protocol. ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
We have developed a shaft power limitation (SHaPoLi) EEXI Shaft Power System, providing the necessary features and functionality to comply with the MARPOL Annex VI, MEPC.335(76) EEXI regulations. Our system uses a Shaft Power Acquisition Module to constantly display, monitor and record propulsion shaft power to ensure compliance with the ...
-
PremiumManufactured by Testo, Inc.based in USA
The flue gas analyzer testo 350 MARITIME can be used for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a trolley function – the testo 350 MARITIME flue gas ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
The Datum Hawk project, developed by Datum Electronics in partnership with Strathclyde University’s renowned Marine Engineering department, represents a change in the way that marine vessels will operate planned maintenance across engine rooms across engine rooms, helping improve vessel efficiency and optimisation. Datum Hawk empowers engineers to adopt condition-based maintenance ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ...
-
Manufactured by Delitek ASbased in NORWAY
Requirements regarding food waste management according to Marpol Annex V. The regulations for the prevention of pollution by garbage from ships, clarified in the MARPOL Annex V, was revised and entered into force on January 1st, 2013. This Annex applies to all ships. ...
-
Manufactured by LABbased in FRANCE
A product line that offers solutions for the removal of nitrogen from ship engines, both low-speed and high-speed. According to the Marpol Annex VI regulations effective from 01.01.2016, depending on the speed of the drive units, only a limited NOx - content in g/kWh may be issued. This is valid both in the NECA zones (Tier III) and ...
-
Manufactured by LABbased in FRANCE
A product line that offers customized solutions for the desulfurization of marine propulsion systems that are operated with HFO. According to the Marpol Annex VI regulations in force since 01.01.2015 heavy oil may be used only with a maximum content of not more than 0.1% sulfur fuel. Alternatively, the use of an exhaust gas scrubber is ...
-
Manufactured by CR Ocean Engineering LLCbased in USA
Exhaust Gas Scrubbers for MARPOL Compliance. Starting January, 1, 2015 the new MARPOL Annex VI regulations limit the level of fuel sulphur emissions to 0.10% m/m (from 1.00%) in Emission Control Areas in Norther Europe and the United ...
-
Manufactured by Terragon Environmental Technologies Inc.based in CANADA
MAGS is now USDA approved by the Animal Plant and Health Inspection Agency (APHIS) as a new technology for handling regulated garbage in the United States. MAGS is also certified in compliance with IMO resolution MEPC.244(66) - replacing MEPC.76(40) - Standard Specifications of Shipboard Incinerators, and IMO MARPOL Annex VI. Until ...
-
Manufactured by JEITEKbased in SOUTH KOREA
compact and flexible installation. The food waste disposers meet the requirement of IMO MARPOL 73/78 ANNEX V for disposal of ground food waste into the open ...
-
Manufactured by JEITEKbased in SOUTH KOREA
compact and flexible installation, The food waste disposers meet the requirement of IMO MARPOL 73/78 ANNEX V for disposal of ground food waste into the open ...
-
Manufactured by Scanship ASbased in NORWAY
Clean water is a precious and valuable resource, and turning yesterday’s waste water into tomorrow’s asset is Scanship’s forte. Scanship’s success in providing and servicing water treatment systems that meet or exceed the most rigid standards and regulations for the cruise line industry, in the most sensitive environments, are deeply rooted in broad expertise and ...
-
Manufactured by CM Technologies GmbHbased in GERMANY
The most common and cheapest way to get a representative sample is to use a drip sampler. Installation: The heavy oil sampler can be installed on any standard flange. MARPOL 73/78: Designed to comply with regulatory requirements in ...
-
Manufactured by SatrindTech Srlbased in ITALY
The model S3/3N, with 3 kW electric power, designed to process small quantities of material, is equipped with a support for 80 liters containers mounted on wheels. Moreover a hopper with a special feeding system that allows the operator to load the material in complete safety is ...
-
Manufactured by SatrindTech Srlbased in ITALY
The model F410/360, with 7.5 kW electric power, can be used to process high quantity of food waste: for this reason, it is more suitable for large cruise ships. The compact size and footprint allows the F410/360 to be easily installed on board ...
-
Manufactured by Delitek ASbased in NORWAY
The Containerized Waste Station has been developed and designed for the Marine and Offshore Industry. The CWS is a compact, flexible and mobile ...
-
Manufactured by Weihai Puyi Marine Environmental Technology Co., Ltd.,based in CHINA
IMO preliminary strategy for reducing greenhouse gas emissions from ships proposes that the total GHG emissions will be reduced by at least 50% by 2050 compared to 2008, and the carbon intensity of international shipping (the average level of the shipping industry rather than individual ships) will be reduced by at least 40% by 2030 compared to 2008, striving to reduce it by 70% by ...
-
Manufactured by Applied Rigaku Technologiesbased in USA
Rigaku NEX XT is the next generation process gauge for high-level total sulfur measurement (0.02% to 6% S) of crude, bunker fuel, fuel oils, and other highly viscous hydrocarbons, including residuums. This versatile, compact, and robust X-ray Transmission/Absorption (XRT/XRA) process gauge is specifically optimized for the total sulfur analysis needs of refineries, pipelines, blending operations, ...
-
Manufactured by Tecnova HT srlbased in ITALY
S-Keeper 7™ is a Marine Scrubbers Type Approved CEMS Continuous Emissions Monitoring System fully engineered, integrated and validated in accordance with the applicable Directives. S-Keeper 7™ is 101% made in Italy by Tecnova HT. S-Keeper 7™ has been found to comply with the applicable requirements for SO2 and CO2 analyzer specified in Chapter 6 of Resolution MEPC.259(68) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you