Mass Flow Meter Equipment
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters have no moving parts and are available for use in pipe diameters from 1/4 inches to 2 inches, [6 mm to 51 mm]. ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Small compact mass flow meter module with RS-232 EIA and analog 0...5 V interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS:Micro Electro-Mechanical ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Small compact mass flow meter module with RS-485 full duplex interface, based on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electro Mechanical ...
-
Distributed by M J Wilson Group Ltdbased in UNITED KINGDOM
Micro Motion ELITE meters provide unmatched flow and density measurement performance to deliver the ultimate control and confidence in your most complex and challenging liquid, gas, and slurry ...
-
Manufactured by Kaifeng AFT Instrument CO.,Ltdbased in CHINA
Coriolis mass flowmeters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids or slurries. AFT meters offer the most accurate measurement available for virtually any process fluid while exhibiting exceptionally low pressure ...
-
Manufactured by Xi`an Kacise Optronics Co., Ltd.based in CHINA
A new type of measuring instrument is based on the principle of Coriolis force manufacturing. The structure of the sensor and the transmitter is composed of two parts. Due to the Coriolis mass flowmeter can directly measure the mass flow rate, fluid density, high measurement accuracy, wide application range, low installation requirements, ...
-
Manufactured by Sanmish Energiesbased in INDIA
The Mass Flow meter is a device that measures the mass of a fluid travelling through a with the Coriolis Principle – these mass flow meters are available in several variations to directly measure fluid mass flow, which has a significant ...
-
Manufactured by Heinrichs Messtechnik GmbHbased in GERMANY
TMU-T is a type of Coriolis mass flow meter that offers many advantages for use in harsh industrial applications. These meters are designed to measure the mass flow rate of liquids or gases in a wide range of industrial processes, including those that involve highly corrosive ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The TopTrak 800 series provides an economical OEM gas mass flow meter in your choice of nylon, aluminum or stainless steel. Direct mass flow rate measurement with the nylon version at prices below that of a typical rotameter. Large tiltable display that can be mounted on the device or on a remote panel. Large ...
-
Manufactured by Axetris AGbased in SWITZERLAND
This mass flow meter is designed for full scale flows up to 15,000 sccm. Main features are an unmatched dynamic range and compact ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Small compact mass flow meter module with RS-232 TTL and analog 0...5 V interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Compact mass flow meter with RS-232 EIA and analog 4...20 mA interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical ...
-
Manufactured by Ferretbased in AUSTRALIA
All ST Series Flow Meters feature an advanced thermal dispersion type mass flow sensing element, which uses two matched, precision platinum resistance temperature detectors (RTDs). One RTD is heated relative to the reference RTD, and the temperature difference between the two is linearised and conditioned to directly measure the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you