Mass Flow Meter Equipment
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters have no moving parts and are available for use in pipe diameters from 1/4 inches to 2 inches, [6 mm to 51 mm]. ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Compact mass flow meter with RS 232 EIA and analog 0...5 V based on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electronic Mechanical ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Compact mass flow meter with RS-485 full duplex interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical ...
-
Manufactured by S.K.I. Schlegel & Kremer Industrieautomation GmbHbased in GERMANY
The AccuFlo® LPD is a high accuracy mass flow meter for accounting and fiscal transfer measurements which is also suitable for applications with extreme mechanical loads. It is optimally tailored to the applicable measuring task. Thanks to its "plug-and-play" design, one can easily install and commission it. It is traceable to ...
-
Manufactured by Heinrichs Messtechnik GmbHbased in GERMANY
The Heinrichs TMU-W Coriolis mass flow meter not only conforms to, but surpasses by far all requirements of the “Organization International de Métrologie Légale ” in the OIML R139 2018 in terms of measuring accuracy at high ...
-
Manufactured by Mass Flow ONLINE B.V.based in NETHERLANDS
Mass Flow Meter for gases with integrated display: Direct thermal mass flow measurement; High accuracy; 10 pre-installed gases; Bright, graphical OLED display; Digital or analog output; alarm and counter ...
-
Manufactured by Mass Flow ONLINE B.V.based in NETHERLANDS
Mass Flow Meter for gases with integrated display: Direct thermal mass flow measurement; High accuracy; 10 pre-installed gases; Bright, graphical OLED display; Digital or analog output; alarm and counter ...
-
Manufactured by Alicat Scientific, Inc.based in USA
Alicat Scientific’s M series digital/analog mass flow meter is an accurate, repeatable, and customizable mass flow meter designed to be used in a variety of applications. Our patented laminar flow technology delivers incredibly fast and inherently linear ...
-
Manufactured by Axetris AGbased in SWITZERLAND
This mass flow meter is designed for full scale flows up to 15,000 sccm. Main features are an unmatched dynamic range and compact ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Small compact mass flow meter module with RS-232 TTL and analog 0...5 V interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Compact mass flow meter with RS-232 EIA and analog 4...20 mA interface, based on the proprietary Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical ...
-
Manufactured by Ferretbased in AUSTRALIA
All ST Series Flow Meters feature an advanced thermal dispersion type mass flow sensing element, which uses two matched, precision platinum resistance temperature detectors (RTDs). One RTD is heated relative to the reference RTD, and the temperature difference between the two is linearised and conditioned to directly measure the ...
-
Manufactured by Sensirion AGbased in SWITZERLAND
SFM3000 is a digital flow meter especially suitable for high-volume applications. The design of the flow channel results in very low pressure drop through the sensor element, making it highly suitable for medical ventilation and respiration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you