Only show results available in Virginia? Ok

Measure Returned Activated Sludge equipment

  • Premium

    Markland - Suspended Solids Density Meter: Maintain Your Concentration!

    This Meter helps municipal/industrial water & wastewater plants monitor concentrations in pipes, tanks, re-circulation loops and clarifiers, and automates silt/sludge removal. It measures primary, secondary, return-activated & backwash sludge, allowing users to program underflow pumps to shut off before sludge becomes too thin, and helping ...

    By Markland Specialty Engineering Ltd. based in Georgetown, ONTARIO (CANADA).

  • Partech - Model TurbiTechw² LA - Self Cleaning Suspended Solids Sensor

    The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and suspended solids or ...

    By Partech (Electronics) Ltd. based in St Austell, UNITED KINGDOM. from WaterWatch Range - Water Monitoring System Product line

  • Partech - Model Turbi-Tech 2000LA - Suspended Solids Sensor

    The Turbi-Tech 2000LA Sensor has been designed for use in aeration systems monitoring Suspended Solids also known as Mixed Liquor Suspended Solids or Activated Sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and Suspended Solids or ...

    By Partech (Electronics) Ltd. based in St Austell, UNITED KINGDOM. from Other Partech Products Product line

  • Premium

    NIVUS - Model POA - Correlation Pipe Sensor

    Medium measurement range for levels up to ca. 1m: Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation in pipes from the outside. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe-shaped sensors are designed for ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • Premium

    NIVUS - Model KDA-R/KDS-R - Doppler Pipe Sensor

    KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe sensors are designed for installation in pipes from the outside using a nozzle. Combined with transmitter types such as PCM F and without OCM F the result is a complete flow measurement system.

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • BIOTIP - Model Max - Modern Conventional Device for Biological Wastewater Treatment

    BIOTIP max is a modern conventional device for biological wastewater treatment. The process of treatment with or without recovery of return activated sludge. I made aeration” branches” that provide good mixing bioaeration all parts of the basin. The main objects of the device BIOTIP maxare: space for the plant to fine-mechanical ...

    By INTERPLAN d.o.o. based in Karlovac, CROATIA.

  • Showcase

    SURCIS - Model BM-Advance - Multi-purpose Respirometer

    Within the BM respirometer series, besides to be equipped with a programable and automatic system for temperature and dissolved oxygen control, it is distinguished from the rest by also being equipped with a programmable system of pH control. Bm-Respirometer Specially Developed For Practical  And Efficient Biological Wastewater Treatment ...

    By SURCIS, S.L. based in Barcelona, SPAIN. from Multipurpose BM Respirometers Product line

  • Premium

    NIVUS - CS2 Correlation Wedge Flow Sensor

    Large measurement range for high flow levels. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    NIVUS - Model POA-V2XXK - Correlation Wedge Sensor

    Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • Premium

    NIVUS - Model KDA-K/KDS-K - Doppler Wedge Sensor

    KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for installation on either the channel wall or the channel bottom. Combined with transmitter types such as PCM F and OCM F the result is a complete flow measurement system.

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • InsiteIG - Model 1500 - Single Channel Suspended Solids Analyzer

    The InsiteIG Model 1500 suspended solids analyzer is a unique system that combines advanced electronics with a solid-state optical sensor. No other suspended solids system can compare with the features and benefits of this revolutionary design. The Model 15 sensor utilizes optical principals based on the near infrared (880nm) range. The Model 15 ...

    By Insite Instrumentation Group, Inc. based in Slidell, LOUISIANA (USA). from Suspended Solids Sensors Product line

  • Mixed Liquor Suspended Solids (MLSS) Monitoring

    Activated Sludge Process Overview: The process deals with the treatment of sewage (and industrial wastewater) and was developed around 1912-1914. Activated sludge is a biochemical process for treating sewage and industrial wastewater that uses air (or oxygen) and microorganisms to biologically oxidize organic pollutants, producing a waste sludge ...

    By Partech (Electronics) Ltd. based in St Austell, UNITED KINGDOM. from Applications - Wastewater and Industrial Effluent Product line

  • Premium

    NIVUS - Model OCM F - Doppler Transmitter

    The OCM F flow meter utilises a fully bidirectional ultrasonic Doppler flow velocity sensor Type KDA. The newly developed intelligent Doppler sensor detects and directly evaluates the flow velocity. Levels can be measured by either using the sensor-integrated pressure sensor or an external sensor.

    By NIVUS GmbH based in Eppingen, GERMANY. from Permanent Flow Monitoring Product line

  • EloDry - Low-Temperature Belt Dryer

    EloDry is a low-temperature belt dryer of the latest generation, in particular for drying sewage sludge. Due to the special design that is optimally adapted to the respective conditions, EloDry® drying systems provide reliable and highly energy-efficient, economical drying at low drying temperatures.

    By Eliquo Water Group GmbH based in Bad Homburg v.d.H., GERMANY.

  • KOKS - Model ECOVAC RDR - Pressure/Vacuum Truck with Scrubber

    The KOKS EcoVac RDR pressure/vacuum truck with scrubber is designed for (heavy) industrial applications and is suitable for suctioning, discharging and transporting fluid and hazardous substances, such as liquids, sludge, fats, oils, fuels and chemicals. Specially developed for working with hazardous and contaminated substances, the truck is ...

    By KOKS Group bv based in Alkmaar, NETHERLANDS.

  • N-Tox - Nitrification Toxicity Monitoring System

    N-Tox is a patented nitrification toxicity monitoring system that provides early warning of activated sludge failure and consequent wastewater treatment works breakdown, and helps prevent ammonia pollution of the aqueous environment. The product detects nitrous oxide (N2O), a harmful greenhouse gas with global warming potential almost 300 times ...

    By Water Innovate Ltd based in Cranfield Bedfordshire, UNITED KINGDOM.

  • Partech - Model 740 - Portable Suspended Solids Monitor

    The 740 Monitor provides, quick and accurate readings of Suspended Solids, Sludge Blanket Level, and Turbidity via an intuitive menu structure from a totally portable package. The robust IP65 enclosure incorporates a security strap and protective case to prevent accidental dropping, impact damage and abrasion of the display surface. The display ...

    By Partech (Electronics) Ltd. based in St Austell, UNITED KINGDOM. from Portables Product line

  • Oxymax - Model ER - Economical Respirometer

    Our new inexpensive single or dual gas (O2 / CO2) respirometer, the Oxymax ER, is a table top model which can be powered from a 115/220V power line or from a car battery (utilizing a voltage converter). Total power consumption is 50W. The ER-10’s dimensions (14” D x 11.5” W x 7.5” H or 36 cm x 29 cm x 19 cm) and weight (20 ...

    By Columbus Instruments based in Columbus, OHIO (USA). from Respirometery Product line

  • Greyline - Model PDFM 5.1 - Portable Doppler Flow Meter

    It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5 works on any liquid ...

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA). from Flow Monitoring Instruments Product line

  • SPI Mag - Single Point Insertion Flow Meter

    The SPI Mag Insertion Flow Meter provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications. Unlike conventional magnetic meters, the SPI Mag's cost is independent of pipe size.

    By McCrometer, Inc. based in Hemet, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you