measuring in produced water equipment in Canada

  • Premium

    Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Mercury Vapor Primary Calibration Unit Product line

  • Expert - Model 700D - Level Measurement Transmitters

    Expert 700D is created especially for level measurement in water borings. The Digital version of Expert 700 is especially recommendable working with Chatter Datalogger. The diameter is just 16mm which ensures that Expert 700D fits in most boreholes – the measured value is delivered as ModBus RS485. Measurement of groundwater borings demands ...

    By MJK Automation - a Xylem brand Distributor in CANADA. from Level Measurement Transmitters Product line

  • Expert - Model 700 - Narrow Transmitter

    Expert 700 is created especially for level measurement in water borings, the narrow transmitter provides stable measurement due to the build-in air pressure and temperature compensation. The diameter is just 16mm which ensures that Expert 700 fits in most boreholes – the measured value is delivered as 4-20mA or RS485. Measurement of ...

    By MJK Automation - a Xylem brand Distributor in CANADA. from Narrow Transmitter Product line

  • Ultrasonics

    The principle measurement techniques used for on-line continuous measurement of produced water are video microscopy and fluorescence. Both these techniques use optical measurements and as such are prone to fouling. Traditional methods of cleaning include use of surfactants, chemicals, back flushing with water and even manual cleaning – all ...

    By Advanced Sensors Ltd. - part of PAC L.P. Distributor in Edmonton, ALBERTA (CANADA). from Ultrasonics Product line

  • 210-101W Water Temperature Sensor

    The 210-101W is a rugged and reliable device for highly accurate submersible water temperature or soil temperature measurement. It produces a 4-20 mA output signal which is an industrial standard for process control monitoring.

    By NovaLynx Corporation Distributor in Burnaby, BRITISH COLUMBIA (CANADA). from 210-101W Water Temperature Sensor Product line

  • ESI Flo-Point - Oil Water Cut Sensor

    In the production side of the oil industry, mature wells produce high percentages of water with each pump stroke. It has become necessary to ensure that even low productivity wells remain in production. Most efficient pumping rates can be attained by measuring oil/water contents at the well head. Flo Point is the ideal method providing the ...

    By E.S.I. Environmental Sensors Inc. based in Sidney, BRITISH COLUMBIA (CANADA). from Oil Water Cut Sensor Product line

  • Water Level Sensor (WLS )

    The WLS is a submersible level transmitter which is fitted with either a ceramic or silicon pressure sensor to produce stable and reliable level measurement from 10mWG up to 100mWG ranges. A choice of 4-20mA, millivolt or voltage ouputs are available as standard. The IMCL series hydrostatic level transmitters are designed for continuous level ...

    By Environmental Measurements Ltd (EML) Distributor in Concord, ONTARIO (CANADA). from Water Level Sensor (WLS ) Product line

  • 210-101W Water Temperature Sensor

    The 210-101W Water Temperature Sensor is a rugged and reliable device for highly accurate submersible water temperature or soil temperature measurement. It produces a 4-20 mA output signal, which is an industrial standard for process control monitoring. Most PLCs (Programmable Logic Controllers), SCADA equipment, and data acquisition systems ...

    By NovaLynx Corporation Distributor in Burnaby, BRITISH COLUMBIA (CANADA). from 210-101W Water Temperature Sensor Product line

  • Maximus - Model II - 6 Stages Reverse Osmosis Water Filtration System

    Offering 6 stages of Reverse Osmosis water filtration producing measurably pure Alkaline drinking water with a healthy PH between 7.6 - 8.5. Purity is accomplished by utilizing a combination of three high efficiency SED & Carbon pre-filters followed by its Reverse Osmosis Membrane (FILMTEC MATERIAL - Dow Chemical - TFC .0001 micron). Next, the ...

    By Aquasafe Systems based in Saanichton, BRITISH COLUMBIA (CANADA). from 6 Stages Reverse Osmosis Water Filtration System Product line

  • DB1 Double Bubbler Liquid Level Sensor

    The DB1 is a self-calibrating system that measures water level (or other liquids), such as measurement in channels and stilling wells. It detects level by measuring the pressure required to force nitrogen bubbles from a pair of submerged tubes. The orifices of the tubes are separated by a fixed vertical distance. The pressure line that is measured ...

    By Campbell Scientific, Inc. Office in Edmonton, ALBERTA (CANADA). from DB1 Double Bubbler Liquid Level Sensor Product line

  • s::scan oxi::lyser - Optical Sensors

    The oxi::lyser is an optical multi-parameter probe that measures the concentration of dissolved oxygen and the temperature directly in the water. It does not need a minimum flow to produce accurate readings and integrates the temperature measurement for On-Line correction. Minimal conventional calibration and virtually zero maintenance.

    By scan Messtechnik GmbH Distributor in MANITOBA (CANADA). from Optical Sensors Product line

  • CS511-L Dissolved Oxygen Probe

    The CS511 is a rugged, low-maintenance sensor that is manufactured by Sensorex. It consists of a self-polarizing galvanic cell that generates a millivolt signal proportional to the amount of oxygen present in the measured medium (typically water). Oxygen diffuses through its membrane onto a cathode that produces a chemical reaction. An electrical ...

    By Campbell Scientific, Inc. Office in Edmonton, ALBERTA (CANADA). from CS511-L Dissolved Oxygen Probe Product line

  • Model H2 / AIR - Gas Generators

    THE H2/AIR FID STATION combines the hydrogen serie LC-H2 and Zero air serie ZA generators in one unit; Hydrogen gas is produced from deionised water using a Proton  Exchange Membrane Technology. Zero air is produced by purifying compressed air sourced from the air network to a total hydrocarbon concentration of < 0.05 ppm  (measured ...

    By Phytronix Technologies Inc. based in QUEBEC (CANADA). from Gas Generators Product line

  • CS700-L Hydrological Services Rain Gage

    The CS700 rain gage is manufactured by Hydrological Services. Rain funnels into a tipping bucket mechanism that tips when 0.01 inches (0.25 mm) of rain has been collected. Each tip is marked by a dual reed switch closure that is recorded by a Campbell Scientific datalogger pulse count channel. After measurement, the water drains through two ...

    By Campbell Scientific, Inc. Office in Edmonton, ALBERTA (CANADA). from CS700-L Hydrological Services Rain Gage Product line

  • Aquasafe - Model Home II - 5 Stage Reverse Osmosis System

    Offering 5 stages of Reverse Osmosis water filtration producing measurably pure drinking water. Purity is accomplished by utilizing a combination of three high efficiency SED & Carbon pre-filters followed by its Reverse Osmosis Membrane (FILMTEC MATERIAL - Dow Chemical - TFC .0001 micron). Finally, the now pure water passes through the ...

    By Aquasafe Systems based in Saanichton, BRITISH COLUMBIA (CANADA). from 5 Stage Reverse Osmosis System Product line

  • Toxi-Screening Kit

    The TOXI-SCREENING KIT is a “field test kit” containing all the materials and reagents required to perform toxicity screening tests on 10-20 water samples. Easy to follow instructions with detailed illustrations are provided within the kits for the conduct of the ultra-rapid field assays. The tests are based on the measurement of the ...

    By MicroBioTests Inc. Distributor in Mississauga, ONTARIO (CANADA). from Toxi-Screening Kit Product line

  • TB4-L Hydrological Services 8

    The TB4 rain gage is manufactured by Hydrological Services Pty. Ltd. Rain funnels into a tipping bucket mechanism that tips when 0.01 inches (0.25 mm) of rain has been collected. Each tip is marked by a dual reed switch closure that is recorded by a Campbell Scientific datalogger pulse count channel. After measurement, the water drains through two ...

    By Campbell Scientific, Inc. Office in Edmonton, ALBERTA (CANADA). from TB4-L Hydrological Services 8 Product line

  • BIF - Model 20181 - Cast/Ductile Iron Universal Venturi Tube

    The Model 20181 Universal Venturi Tube (UVT) is a differential producing, primary measurement device for accurately metering water, sewage, air and other fluids for both municipal and industrial applications. The Model 20181 Cast Iron venturi is a multipurpose, short laying length, efficient and economical device that is time proven and unmatched ...

    By BIF Distributor in Concord, ONTARIO (CANADA). from Cast/Ductile Iron Universal Venturi Tube Product line

  • Model CFS Series - Fan Silencer

    Industrial fan installations, small or large, produce noise. This fan noise is one of the most predominant noise sources in an industrial plant. The magnitude and intensity of noise will vary depending on fan size, horse power, air flow, type and number of blades, static pressure, rotational speed, etc. Fans normally deliver a large volume of air ...

    By E.I.Williams Industries based in Ajax, ONTARIO (CANADA).

  • NSF - Model 61 - Parshall Flumes

    MFG Water Treatment Products’ Parshall flumes are used to measure liquids in open channels, including industrial discharge and a wide range of influent/effluent liquids. Our NSF 61 Parshall flumes ensure that the unbroken flow lines do not obstruct flow which can cause build-up of debris. The unbroken lines also result in low head loss ...

    By Molded Fiber Glass Water Treatment Products (MFG) Distributor in ONTARIO (CANADA). from Parshall Flumes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you