measuring in produced water equipment in Ontario

  • Premium

    Tekran - Model 2505 - Mercury Vapor Primary Calibration Unit

    The Tekran Model 2505 Mercury Vapor Calibration Unit is an ultra-precise and accurate closed-vessel, saturated gaseous mercury source. The 2505 utilizes a thermoelectrically cooled mercury reservoir and dual temperature sensors calibrated against a US National Institute of Standards and Technology (NIST) traceable source producing exceptionally ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Mercury Vapor Primary Calibration Unit Product line

  • Model H2 / AIR - Gas Generators

    THE H2/AIR FID STATION combines the hydrogen serie LC-H2 and Zero air serie ZA generators in one unit; Hydrogen gas is produced from deionised water using a Proton  Exchange Membrane Technology. Zero air is produced by purifying compressed air sourced from the air network to a total hydrocarbon concentration of < 0.05 ppm  (measured ...

    By Phytronix Technologies Inc. Office in Toronto, ONTARIO (CANADA). from Gas Generators Product line

  • Model CFS Series - Fan Silencer

    Industrial fan installations, small or large, produce noise. This fan noise is one of the most predominant noise sources in an industrial plant. The magnitude and intensity of noise will vary depending on fan size, horse power, air flow, type and number of blades, static pressure, rotational speed, etc. Fans normally deliver a large volume of air ...

    By E.I.Williams Industries based in Ajax, ONTARIO (CANADA).

  • Premium

    Titan - Titan Hydroxyl Maximizer Uses Ultrasonic Technology

    The Titan Hydroxyl Maximizer uses ultrasonic technology to produce a very fine cold water vapor. The Maximizer is placed right behind a Titan Hydroxyl Generator and will increase the direct intake of humidity which increases the hydroxyl production. The Maximizer will make your Titan 4000 perform as if it is on steroids. Do not worry about raising ...

    By International Ozone Technologies Group, Inc. Distributor in Mississauga, ONTARIO (CANADA). from Titan Hydroxyl Maximizer Uses Ultrasonic Technology Product line

  • NSF - Model 61 - Parshall Flumes

    MFG Water Treatment Products’ Parshall flumes are used to measure liquids in open channels, including industrial discharge and a wide range of influent/effluent liquids. Our NSF 61 Parshall flumes ensure that the unbroken flow lines do not obstruct flow which can cause build-up of debris. The unbroken lines also result in low head loss ...

    By Molded Fiber Glass Water Treatment Products (MFG) Distributor in ONTARIO (CANADA). from Parshall Flumes Product line

  • Nonwoven Geotextiles

    Nonwoven geotextiles have a wide range of applications in civil environmental engineering and construction projects. Their uses include: Filtration of soils in drainage applications by retaining soil particles while allowing for the free flow of water. Separation and stabilization in road and railway construction. Prevention of soil movement in ...

    By Nilex Distributor in ONTARIO (CANADA).

  • BIF - Model 20181 - Cast/Ductile Iron Universal Venturi Tube

    The Model 20181 Universal Venturi Tube (UVT) is a differential producing, primary measurement device for accurately metering water, sewage, air and other fluids for both municipal and industrial applications. The Model 20181 Cast Iron venturi is a multipurpose, short laying length, efficient and economical device that is time proven and unmatched ...

    By BIF Distributor in Concord, ONTARIO (CANADA). from Cast/Ductile Iron Universal Venturi Tube Product line

  • Water Level Sensor (WLS )

    The WLS is a submersible level transmitter which is fitted with either a ceramic or silicon pressure sensor to produce stable and reliable level measurement from 10mWG up to 100mWG ranges. A choice of 4-20mA, millivolt or voltage ouputs are available as standard. The IMCL series hydrostatic level transmitters are designed for continuous level ...

    By Environmental Measurements Ltd (EML) Distributor in Concord, ONTARIO (CANADA). from Water Level Sensor (WLS ) Product line

  • Model EX100/200 - Electromagnetic Flow Sensors

    The complete lack of moving parts of this insertion electromagnetic flow sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out. A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated. This tiny ...

    By Global Water Instrumentation, Inc. - a Xylem brand Distributor in ONTARIO (CANADA). from Electromagnetic Flow Sensors Product line

  • Toxi-Screening Kit

    The TOXI-SCREENING KIT is a “field test kit” containing all the materials and reagents required to perform toxicity screening tests on 10-20 water samples. Easy to follow instructions with detailed illustrations are provided within the kits for the conduct of the ultra-rapid field assays. The tests are based on the measurement of the ...

    By MicroBioTests Inc. Distributor in Mississauga, ONTARIO (CANADA). from Toxi-Screening Kit Product line

  • BIF - Model 20182 - Fiberglass Reinforced Plastic (FRP) Insert Universal Venturi Tube (UVT)

    The Model 20182 Fiberglass Reinforced Plastic (FRP) Insert Universal Venturi Tube (UVT) is a differential-producing, primary-flow, metering element designed to accurately measure water, air, gases, acid solutions, alkali solutions and slurries, where low head loss and high accuracy is desired. Standard venturis are manufactured for basic line ...

    By BIF Distributor in Concord, ONTARIO (CANADA). from Fiberglass Reinforced Plastic (FRP) Insert Universal Venturi Tube (UVT) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you