medical waste Equipment available in Guinea

Available in Guinea| Near Guinea
236 Results found

We couldn't find any medical waste equipment in Guinea

Here is a list of results available in Guinea

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: medical waste ×

  • Available in: Africa ×

  • Available in: Guinea ×


Sterilwave - Model 440 - Medical Waste Disposal Equipment

by Bertin Technologies - Laboratory Equipment     based in Montigny - Le - Bretonneux, FRANCE

Sterilwave, blending and disinfection by microwave. Sterilwave, an innovative onsite solution for bio hazardous waste management! Eco-friendly and easy-to-use, the Sterilwave system is installed directly in healthcare units. Cost-effective solution, this fully automated solution shreds and sterilize by microwave any hazardous medical waste into ...

Sterilwave - Model 250 - Medical Waste Disposal Equipment

by Bertin Technologies - Laboratory Equipment     based in Montigny - Le - Bretonneux, FRANCE

Sterilwave, blending and disinfection by microwave. Sterilwave, an innovative onsite solution for bio hazardous waste management! Eco-friendly and easy-to-use, the Sterilwave system is installed directly in healthcare units. Cost-effective solution, this fully automated solution shreds and sterilize by microwave any hazardous medical waste into ...

Medical Waste Disposal Systems

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

The Mark-Costello Co. Sterilizers use the basic principle of high temperature steam under pressure in an enclosed fully automatic steam retort. The sterilizer comes completely assembled and ready for simple final connections. All chamber vessels are built in accordance with requirements of the ASME Pressure Vessel Code. All Mark-Costello Co ...

Medical Waste Autoclaves

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

Regulated Medical Waste Processing Using High Pressure Steam. The autoclave as a device to sterilize medical equipment and supplies using high pressure steam was invented by Charles Chamberland about 1879. The Mark-Costello Co. has been building high pressure medical waste autoclave sterilizers for over 30 years. Safe and economical treatment, ...

Model MP 200 - Medical Waste Incinerator

by Addfield Incinerators Environmental Systems Ltd     based in Cannock, UNITED KINGDOM

The MP-200 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents. These systems are designed to obtain maximum benefit from Addfield’s hot hearth technology ensuring any energy that is created is utilised to destroy the waste. Highly effective and very fuel-efficient with ...

Model MP 100 - Medical Waste Incinerator

by Addfield Incinerators Environmental Systems Ltd     based in Cannock, UNITED KINGDOM

The MP-100 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents. These systems are designed to obtain maximum benefit from Addfield’s hot hearth technology ensuring any energy that is created is utilised to destroy the waste. Highly effective and very fuel-efficient with ...

18 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

48 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

RetroBurnR Medical Waste Incinerator

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

The RetroBurnR is a VERY efficient thermal oxidizer, fueled by diesel oil. RetroBurnR can be used for: high moisture waste, animal cremation, agricultural incineration, veterinarian disposal.

VERTISA - Medical Waste Post-Shredding

by VERTISA Medical Waste Technology     based in Orlando, FLORIDA (USA)

Medical waste collected in bins or plastic bags are in transferred into stainless steel autoclave carts. The carts are pushed into the autoclave, where a pre-vacuum process ensures that all the air is removed from the wast

AMB Ecosteryl - Model Serial 125 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 175 kg/hr (385 lbs/hr)• Volume capacity : approx. 2100 L• Length: 10m• Width : 3.5m• Height : 5.2m• Weight : 10 tons• Required floor space : 6 x 12m• Minimum ceiling height : 6m• Electric power consumption : 60 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1200 tons• Electrical ...

Promed - Model 2000 - Medical Waste Sterilization Systems

by Vertisa Environmental Technologies     based in Çankaya / Ankara, TURKEY

Before transporting the waste to public land#30;ll sites, the waste must be sterilized and shredded. The essence of our solution is that the contaminated waste is sterilized and shredded into small parts completelly in our sterilization system. The contaminated waste is lifted to the upper part of the autoclave into a very hard and resistant ...

Elastec - Model MediBurn - Medical Waste Incinerator

by Elastec     based in Carmi, ILLINOIS (USA)

Environmentally safe, compact, portable, and easy to operate, MediBurn is a diesel-fueled medical waste incinerator for hospitals and clinics. Available in two sizes, the original MediBurn is capable of disposing of up to 8 cubic feet (0.22 cubic meters) batch-loads of infectious and pathological waste with a burn rate of 18 to 20 kg per hour. ...

Medical Waste Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Shredding and reducing medical waste poses special challenges. Processing must meet stringent regulatory standards for the safe handling of infectious and red bag waste, including precise size reduction to ensure proper sterilization. In addition, the waste is comprised of many different materials, ranging from sharps to textiles, requiring ...

Medical Waste Truck

by EMS Makina Sistemleri Co.,Ltd.     based in Ankara, TURKEY

EMS Manufacturing in Turkey Medical Waste Carrier Truck which is usefull for Hospitals. EMS operates in many municiplaity of Turkey doing full system of medical waste caring,strelization and disposable equipments with medical waste bags.We have all conformity certificates with guarantess!For more informaitons please contact with us!

Medical Waste Disposal

by ARTECH Reduction Technologies     based in Oakville, ONTARIO (CANADA)

ARTECH engineers complete, turnkey medical waste processing plants. Autoclaves, shredders and compactors are the core components of your sterilization system. Ancillary equipment such as tippers conveyors and carts are custom designed based on your particular locations requirements. A cost effective system that complies with all local regulations, ...

Medical Waste Processing

by Shred-Tech Corp.     based in Cambridge, ONTARIO (CANADA)

Shred-Tech’s Industrial Medical Waste Shredders have been installed in many hospitals and high volume commercial processing plants throughout the world. Slow speed, high torque shredders easily reduce the toughest medical grade materials ranging from fabrics to glass, plastics and stainless steel instruments and more. These machines reduce ...

28 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

Vecoplan/ReTech Medical Waste Grinder

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

Reduce your processing volume and save on disposal costs. The Mark-Costello Company designs and manufactures the most complete range of medical waste processing and hospital waste sterilization equipment in the world today. We also incorporate world class components into our systems and in the case of shredding and grinding medical waste, we have ...

STAJEL Liquid Medical Waste Sorbents

by Metan Int`l Trade Co., Ltd.     based in Çankaya-Ankara, TURKEY

The liquid portion of infectious medical waste would contaminate the environment to certain extent during at the points of generation, during the internal and external transports, interim storage and temporary storage, etc. by spillage, leak or accidents. The possible hazard by inhalation and contact might be very high and unpredictable. To ...

Need help finding the right suppliers?

Let the XPRTs do the work for you