Only show results available in Texas? Ok

membrane characterization equipment

  • Premium

    ENVICON ceramic aerator - Model EKR AeroMax - High grade ceramic tube diffuser

    Ceramic diffusers are used mainly for continuous aeration in industrial plants where there are problems with the chemical resistance of membrane materials or for ozonation of drinking water plants.ENVICON ceramic diffusers are characterized by their high mechanical strength and good chemical resistance properties, also in the presence of solvents. ...

    By ENVICON GmbH & Co. KG based in Dinslaken, GERMANY.

  • Permporometer

    Knowing the pore size and size distribution of selective layers is essential in the development and application of ceramic membranes. The ECN Permporometer offers a quick, cheap and effective method for the characterization of micro- and mesoporous membranes. The Permporometer has been developed by the Energy research Centre of the Netherlands, ...

    By Energy research Centre of the Netherlands (ECN) based in Petten, NETHERLANDS.

  • Membrane Interface Probe (MIP)

    The Membrane Interface Probe (MIP) is a High-Resolution Vertical Mapping tool which Numac offers to detect in real time subsurface contamination for environmental site assessments and characterizations, specifically volatile organic compounds (VOCs) such as halogenated solvents, petroleum compounds, and methane.The MIP is a multipurpose tool for ...

    By Numac Drilling Services Australia based in Williamstown North, AUSTRALIA.

  • Membbrane Separation

    Membrane procedures use the principal of tangential flow filtration. They are characterized by the presence of a “permeate” and a “concentrate”. The filter medium used is called a “membrane”. It takes the form of a thin wall allowing the selective separation of chemical, ionic, molecular and biological species.

    By EPURO SAS based in TRAPPES, FRANCE.

  • Sinap - Model HW Type - Spiral UF Membrane

    Spiral roll type ultra filter is characterized by small pressure loss, Membrane high packing density, so module is easy to replace and easy to realize large-scale. HW-type use wide flow channel design, it’s not easy to be blocked and has successful applied in biochemical, pharmaceutical, food, beverages, condiments, such as enzyme ...

    By Shanghai Sinap Membrane Tech Co., Ltd based in Baoshan District, CHINA. from Spiral UF Membrane Product line

  • Wastewater Treatment Plants

    Solutions for treating and recycling wastewater from a variety of sources are increasingly in demand. The innovative and successfully proven membrane bioreactor system (MBR) featuring patented MaxFlow membrane modules is based on a combination of modern membrane filtration technology and the conventional activated sludge process; it is ...

    By A3 Water Solutions GmbH based in Saerbeck, GERMANY.

  • Liquid Entry Pressure Tester

    The Liquid Entry Pressure (LEP) pilot is essential when characterizing membranes, especially Membrane Distillation (MD) membranes. Convergence can design and manufacture a complete system to perform research on MD membranes.

    By Convergence Industry B.V. based in Enschede, NETHERLANDS. from Liquid Entry Pressure Tester Product line

  • SWAM - Model 5A - Atmospheric PMx Particles Monitor - Sampler

    Swam 5A Monitor can work with any sampling inlet (for example: PM10, PM2.5, PM1) within the operating flow rate range 0.8 ÷ 2.5 m³/h. Sampling at ambient temperature with measurement of the external temperature and of the temperature near the filter. Sampling on ø 47mm filter membranes, exploitable for further analysis. Mass ...

    By FAI Instruments based in Fonte Nouva, ITALY.

  • Model THP - Temperature Sensor

    It is an instrument for measuring combined measuring relative humidity, air temperature and air pressure. The sensor is characterized by an electronic energy saving. The filter membrane reliably protects the capacitive measuring element of air pollutants.

    By TEK 3000 based in Valls, SPAIN. from Temperature Sensor Product line

  • RVF - Rotating Vibrating Filtration System

    RVF (rotating-vibrating filtration) is designed for filtration of highly concentrated liquids characterized with high fouling and/or clogging characteristics. It uses disc-shaped flat sheet membranes in the vicinity of the rotating bodies. These rotating bodies as well as the pulsating blows generate highly dynamic vortex movements of filtered ...

    By RVF-Filtration based in Paris, FRANCE.

  • Biomicrobe Technology - TPU MEMBRANES

    The TPU membrane will be your best choice for lower pressure applications. TPU features an opening pressure of 15 mbar (at 8 m³ air / m aerator). TPU combines all the advantages of silicone and rubber in one membrane: plasticizer-free, smooth surface, good chemical resistance, temperature and weather resistance, high tear resistance and good ...

    By Biomicrobe Technology based in Jakarta, INDONESIA.

  • MS - Mixed Cellulose Esters Membrane Filter (MCE)

    MS® mixed cellulose ester(MCE) membrane filters are composed of cellulose acetate and cellulose nitrate. Because MCE membrane is biologically inert, it's one of the most widely used membranes in analytical and research applications. MCE membrane filter is characterized by a smoother and more uniform surface than pure nitrocellulose filter. ...

    By Membrane Solutions LLC based in Dallas, OHIO (USA). from Mixed Cellulose Esters Membrane Filter (MCE) Product line

  • BIological Treatment - Aeration Systems for Nitrification and Denitrificattion

    Aeration system EKOMVO is used for aeration and hydraulic agitation of tankages, especially at communal and industrial waste water treatment plants, eventually at intensive fish farming. Oxygen transfer into waste water is done by suitable aeration membrane with fine-buble or medium-buble perforation, according to need. Membrane material is ...

    By EKOMVO s.r.o. based in Praha, CZECH REPUBLIC.

  • HYDRA - Dual Channel Sampler

    The instrument can work with any sampling inlet (PM10, PM2.5, PM1 ) within the operating flow rate range 0.8 ÷ 2.5 m³/h, on two distinct independent channels. Temperature control of the air flow through one or both the sampling lines, in order to minimize volatile material losses (optional feature). Cooling system for the sampled ...

    By FAI Instruments based in Fonte Nouva, ITALY.

  • Membrane Systems

    Aqueous Solutions custom designs and fabricates membrane systems for water purification, wastewater resource reclamation and water recycling. There are several membrane separation technologies, each characterized by different capabilities and operating specifications. Membrane types listed by pore size from largest to smallest.

    By Aqueous Solutions based in Williamstown North, AUSTRALIA. from Membrane Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you