Membrane Testing Equipment In USA
-
Manufactured by Sterlitech Corporationbased in USA
The unique design of the CF042 test cells allows flat sheet membranes to be quickly changed out, thus reducing time between trials. Skids are available in single or multiple cell configurations in both parallel and series modes. The skid system also displays and records the data collected by the integrated sensors in real-time. Collected data ...
-
Manufactured by Sterlitech Corporationbased in USA
This system has been specifically configured for use with standard 1812 and 2540 spiral wound elements in parallel with Sterlitech cross flow cells, including Sepa, CF042, and ...
-
Manufactured by Sterlitech Corporationbased in USA
The unique design of the Sepa test skids allow flat sheet membranes to be quickly changed out, thus reducing time between trials. Skid systems are available in single or multiple cell configurations in both parallel and series modes. The skid system also displays and records the data collected by the integrated sensors in real-time. Collected ...
-
Manufactured by Sterlitech Corporationbased in USA
Refurbished Membrane Test Skid, 3x CF042 in parallel, Digital, VFD, Scale, Chiller, 110V, 60Hz, ...
-
Manufactured by REB Research & Consultingbased in USA
Uniform Temperature Membrane Test Rig used to test hydrogen permeation in disc or tube (specify) membranes at pressures up to 300 psi and temperatures up to 450 C. Stainless Steel, 1.75" OD with an interior volume 1.4" ID" by 8" or 18" long, sealed by a copper or graphite gasket. A counter flow annulus provides improved ...
-
Manufactured by Sterlitech Corporationbased in USA
The Sterlitech Forward Osmosis Membrane Test Skid is designed to evaluate the performance of Forward Osmosis membranes under varying conditions. This test skid offers experimental control by allowing adjustment of the flow parameters to accommodate a wide range of operating conditions and applications. This system has been ...
-
Manufactured by Sterlitech Corporationbased in USA
Sterlitech 1812 Membrane Test Skids are designed to evaluate the performance of membranes widely used in Reverse Osmosis, Nanofiltration, Ultrafiltration, and Microfiltration applications by simulating the flow dynamics of larger, commercially available membrane systems. This test skid offers experimental control ...
-
Manufactured by REB Research & Consultingbased in USA
Higher Pressure Membrane Test Rig, 21" tall by 1.5" outer diameter; 7/8" ID, used to test hydrogen permeation at pressures up to 600 psi and temperatures up to 650 C. Test volume is 18" long, with a counter-flow annulus for improved temperature uniformity. Test volume sealed with a 1" swagelok fitting. ...
-
Manufactured by PCI Membranes - Filtration Groupbased in UNITED KINGDOM
at pressures of up to 55 bar at 70°C and can accept the full range of membranes available for the B1 module, allowing tests of RO, NF and UF processes with the same module. Membrane area is 0.024m2 or 0.096m2. Membranes are available in packs of 6 tubes for any membrane type. The module has termination ...
-
Manufactured by PCI Membranes - Filtration Groupbased in UNITED KINGDOM
The A5 Mini Tester is designed for laboratory scale evaluation of Ultrafiltration membrane applications with moderate levels of suspended solids. It consists of 5 x 6mm diameter membrane tubes potted onto a 1″ nominal bore plastic tube, with overall length 1.2 metres and membrane area of ...
-
Manufactured by REB Research & Consultingbased in USA
Graphite-steel or copper gaskets for 2 3/8" or 4" Conflat flanges. Used for sealing conflat flanges at pressures up to 350 psi and temperatures up to 400 C.Graphite ferrules; used for high temperatuere membranes. O-rings are for lower ...
-
Manufactured by REB Research & Consultingbased in USA
Swagelok 3/8" unions and caps modified to accomodate the swelling of refractory membranes. Use with and 3/8" graphite ferrules (bleow) and apparatus above for testing brittle hydrogen permeation membranes or membranes that might ...
-
Manufactured by REB Research & Consultingbased in USA
Tublular Pd-25%Ag membranes 1/8" OD x .003" wall: plain, coated with Pd-grey, or coated with PdCu or PdAu. These are generally sold sealed at one end and brazed to a stainless steel stub at the other. Length=6"+1" stub, 7" total. Selectivity to hydrogen ...
-
Manufactured by REB Research & Consultingbased in USA
Tube bundle containing 72 Pd-Ag membranes 1/8" OD x .003" wall x 18" tall. Sold brazed into a tube sheet with spacers to hold the membranes and promote proper gas flow. For operation at pressures up to 400 psi and temperatures up to 450 ...
-
Manufactured by REB Research & Consultingbased in USA
Used to extract water, CO2, and H2S from syngas, landfill gas, etc. while retaining hydrogen, methane, and CO. 1000 cm2 membrane module. For other sizes, ask. Good to 60 psig. See here for permeability information and suggested ...
-
Manufactured by REB Research & Consultingbased in USA
Niobium-based hydrogen permeation membranes 3/8" x .007" wall coated with 1.6/u Pd 4" or 6" standard lengths. Other lengths available. Graphite ferrules and modified swageloks sold ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen High Temperature Membrane No. 89 is a single-component, asphaltic mastic recommended as an impervious membrane under corrosion-resistant monolithic linings or acid-resistant brick masonry for the protection of metal or concrete substrates. Spray application with airless equipment results in a flexible coating resistant to ...
-
Manufactured by Sterlitech Corporationbased in USA
The CF042AC is the first transparent crossflow filtration cell. This bench scale model is made from acrylic and now allows visual monitoring for easier use with applications such as membrane development testing and flat sheet membrane quality ...
-
Manufactured by Sterlitech Corporationbased in USA
Sterlitech Membrane Distillation Test Cells are bench-scale cross/tangential flow membrane test cells used in temperature driven membrane separation ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Peak Scientific’s Solaris XE nitrogen generator offers a reliable, compressor-free gas solution that can comfortably meet the demands of most mass spectrometers within Waters’ portfolio of instruments. Using our tried and tested membrane technology, Solaris XE can operate with varying flow rates (up to 35L/min of high purity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you