metal separation Equipment

1901 Results found
Only show results in Virginia?
OK
  • Keyword: metal separation ×


TOMRA - Model COMBISENSE - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The COMBISNESE is a specialized high end machine to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Shred1 Ballistic - Metal Separator

by Eriez Magnetics Europe Ltd     based in Bedwas, UNITED KINGDOM

The Shred1 Ballistic Separator from Eriez uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post drum magnet flow.

TOMRA - Model FINDER - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The FINDER is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Model QUICKTRON Series - Metal Separators

by Mesutronic Gerätebau GmbH     based in Kirchberg / Wald, GERMANY

QUICKTRON metal separators examine bulk materials such as granulates and powders in free fall. The ideal reject technology with digital 2 channel metal signal evaluation assures optimum safety, from receiving to shipping. The time required to eject contaminated product is minimized. This reduces loss of material and associated costs. Compact ...

Model QUICKTRON 05 A - Metal Separators

by Mesutronic Gerätebau GmbH     based in Kirchberg / Wald, GERMANY

Metal separator for the inspection of free-flowing bulk materials in free fall. The device can be adapted to the respective application due to its flexible design.

Quicktron - Model 07 RH HyQ Clean - Metal separator

by Mesutronic Gerätebau GmbH     based in Kirchberg / Wald, GERMANY

Metal separator for the inspection of free-flowing bulk materials in free fall. The device satisfies even the highest hygiene requirements.

Quicktron - Metal Separators

by Allcontrols Ltd.     based in Cambridge, UNITED KINGDOM

Gravity feed metal separators for bulk material and ATEX Applications.

Metal Separation

by First State Plastics, Inc.     based in Branford, CONNECTICUT (USA)

FSP systems for removing ferrous and non-ferrous metals are capable of yielding 99.9999% clean material.

hamos - Model HS Series - Electronic All-Metal Separators

by Hamos GmbH     based in Penzberg, GERMANY

hamos HS electronic all-metal separators serve for detection and fully-automatic removal of individually arising metallic contamination in free-falling, free-flowing bulk materials. Not only are metals containing iron (ferrous metals) recognised here, but also non-ferrous metals such as, e.g. aluminium, copper, brass, etc.The result is a ...

Model VNES - Non-Ferrous Metal Separator

by Vecoplan     based in Bad Marienberg, GERMANY

The non-ferrous metal separator VNES can be installed in the conveying line itself for reliable separation of non-ferrous metals from wood, domestic refuse, plastics, etc.

hamos - Model FFS Series - Pneumatic Metal Separators

by Hamos GmbH     based in Penzberg, GERMANY

The hamos FFS series electronic all-metal separators recognise and remove metal particles from bulk materials that are transported in vacuum and pressure conveying lines. The metal recognition and separation takes place 'on the fly' with conveying speeds at up to 30 m/s. Special mechanical separation systems are used, depending on the type of ...

hamos - Model KWS Series - Electrostatic Metal Separators

by Hamos GmbH     based in Penzberg, GERMANY

hamos KWS electrostatic separators are used for dry separation of metals from plastics and other non-conductive materials. Even finest metal particles of < 0.1 mm can be separated.It is therefore an especially efficient way to regain valuable metals by separating them from plastics or to clean plastics from metal parts before further ...

WENDT/TITECH Finder - Metal Separation Systems

by WENDT CORPORATION     based in Buffalo, NEW YORK (USA)

WENDT/TITECH finders have been the industry standard in metal recovery technology since their introduction to the North American marketplace in 2001. Our strong focus on research and development has maintained this leadership position. Yesterday's 1-bit metal sensors have evolved from two possible states (metal or no metal) into today's ...

Dense Medium Separation - Model Metals - Automobile and Industrial Waste - ASR

by ESR International LLC     based in Dallas, TEXAS (USA)

Since 1991, ESR International LLC has applied its bi-directional dense medium separation technology to the recycling of automobile and industrial waste. For many years ESR’s principle client in this regard has been the Galloo Group. At first the Galloo staff was not convinced that a carrot separator could compete with the classical dense medium ...

PRAB - Tramp Metal Separators

by PRAB, Inc     based in Kalamazoo, MICHIGAN (USA)

PRAB offers a complete line of tramp metal separators to remove bar-ends, broken tooling and other solids from chip flow protecting processing equipment from damage.

SteelMaster - Non Ferrous Metal Separator

by Steinert Elektromagnetbau GmbH     based in Köln, GERMANY

Combining ballistic and magnetic effects, the SteelMaster separates an iron-rich ferrous fraction from copper-containing material. It is used to separate heavy parts from a ferrous product in order to reduce its copper content. Main targets are copper coils with a ferrous core so called meatballs.  This technology offers a cheaper ...

STEINERT - Model 4T - Non Ferrous Metal Separator

by Steinert Elektromagnetbau GmbH     based in Köln, GERMANY

The new generation Non-Ferrous Metal Separator - more profitability for fine fractions! The STEINERT NES 4T provides the economic basis for every recycling system involving the extraction of non-ferrous metals. Thanks to its reliability and long service life, it ensures an optimal operating result over the long term.

GEA - Heavy Metal Separation

by GEA Bischoff GmbH     based in Essen, GERMANY

The off-gas of metallurgical processes such as copper smelters or zinc roasters are containing a high load of heavy metals, for instance lead (Pb), copper (Cu), chrome (Cr), nickel (Ni), cadmium (Cd), mercury (Hg). Most of these heavy metals are particulates, which are precipitated in the gas cleaning plant, mainly consisting of dry precipitator, ...

Wagner - Metal Separation Magnete

by KMH Systems Ltd     based in Callan, IRELAND

Wagner Magnete is an industry expert in the supply of metal separation equipment for the removal of ferrous and non-ferrous metals from within material streams. Their magnetic separators for the separation of ferrous metals from bulk goods include:

Sesotec - Model FLAKE PURIFIER M Series - Metal Separation System

by Sesotec GmbH     based in Schoenberg, GERMANY

The FLAKE PURIFIER M is a metal separation system, developed to analyse PET flakes and used to separate metal particles. New micro processor technology enables precise localisation of metal particles and separation with minimal loss of good material. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be ...

Need help finding the right suppliers?

Let the XPRTs do the work for you