Metal Separation Equipment Near Ghana
-
Manufactured by Nehlsen AGbased in GERMANY
Sorting plant for commercial and packaging waste In sorting plants, different types of post-consumer packaging waste and commercial waste are ...
-
Manufactured by Stolzbased in FRANCE
The ABMS type hammermill is the result of a long experience acquired by STOLZ company for the last few years with a strong will to follow the animal feed plant evolution (production, maintenance, automation...). Feeding the hammermill all over its length and adding cleaning functions to separate metal parts and stones have been the most ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr's Part.X PV offers high-efficiency particulate removal. This product was formerly known as the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Gold Electrode Rod for separate metal pin ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Platinum Electrode Rod for separate metal pin ...
-
Manufactured by Gill Sensors & Controls Limitedbased in UNITED KINGDOM
The Dual Output Position Sensor is a unique non-contact sensor which measures either the linear or rotary position of a metallic activator accurately and repeatably. The output characteristics of the sensor are determined by the shape and material of the activator, which moves within two sensor cavities and produces a signal relative to ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
The life cycle of paper products is a much discussed topic. Falling raw material prices and quality are frequently used as buzzwords. Lindner supports a resource-efficient future – with the perfect paper recycling technology. Lindner's tried-and-tested shredding solutions are key in waste paper processing, protecting the environment and saving financial resources. Our system partners use ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Eriez ProSort improves metal separation while operating at a fraction of the cost of air power metal sorters. Ideal for scrap processors, the new airless ProSort II doubles the number of metal sensors found on the original ProSort machine and positions them on one-inch centers. These high resolution sensors are aligned with a new ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
The Shred1 Ballistic Separator from Eriez uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post drum magnet ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
A new addition to the diverse range of Eriez non-ferrous metal separators providing unique solutions for the dynamically changing recycling industry. Eriez's new eccentric ECS, RevX-E, is designed with an eccentrically mounted magnetic rotor within the nonconductive larger diameter shell. This eccentric rotor concentrate eddy current ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Polymag additives bring metal detectability, X-Ray contrast and magnetic susceptibility into plastic mouldings. The PolyMag process was developed as part of Eriez’ commitment to reducing waste in the processing industry. Eriez PolyMag additive is a non-dusting pellet which allows plastic moulders and extruders to produce metal ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
or negatively charged PVDF chemistries, they offer excellent chemical resistance, high flux and easy cleaning in applications such as oily wastewater treatment, colloidal silica and kaolin clay or latex concentration, ink and pigment processing, and metal finishing separations. ...
-
Manufactured by Pellenc STbased in FRANCE
The FLAKE PURIFIER+ system is especially designed for the sorting of plastic flakes such as PET, HDPE or mixed plastics flakes. Separation of material by air-blast unit. Based on a modular concept these systems allow the combination of all available sensors for contaminant detection: sensors for metal separation, sensors for color ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as ...
-
Manufactured by Danieli Centro Recyclingbased in FRANCE
. At existing sites, our experienced engineers can offer new insight and practical solutions to modernise and enhance production output, metal recovery and overall efficiency. We deliver scrap shredders starting from 600kW (800 Hp) right up to 7,500kW (10,000 Hp) that offer world leading performance and reliability at industry leading low operating ...
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
The Magnetic Roller (R-RM) consists of a cylinder where the whole surface is magnetized. It is usually used as a roller at the end of the ...
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
In a Rectangular Pipe (R-TMR), in an “S” shape, several sheets of high intensity magnets are used in order to get the entire flow of material circulating under the influence of the magnetic field. The ferrous metals are manually trapped and separated. In the Circular Pipe (R-TMC), the magnetic assembly is in the centre of the ...
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
Metal Separator by Inductive Detection and Blowing (R-SIM) allows to separate metals from other materials. A metal tape on acceleration is detected. After processing the information at high speed, a complex pneumatic system performs blown metal, changing its trajectory and ...
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
The Cans & Briks* SORTER (R-SLB) is classifying equipment that processes the flow of material made up of cans and briks1 that are previously separated from the general flow of the Municipal Solid Waste by means of an Eddy Current Separator. The cans undergo the most influence and are thrown ahead, where they are distinctly separated ...
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
The magnetic field is produced by the joining of highly powerful magnets. An iron material that crosses this magnetic field will be attracted to the magnets and separated from the rest of the materials, driven by the pulling band. The Permanent Magnetic Overband (R-OMP) can be installed either transversally or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you