Metal Sorting Equipment In Europe
-
Manufactured by REDWAVE - a division of BT-Wolfgang Binder GmbHbased in AUSTRIA
HIGH PERFORMANCE SORTING OF NONFERROUS METALS MACHINE FACTS: -Future-proof investment – flexible and versatile -Sorting widths: 450 mm, 900 mm, 1370 mm -Small footprint: 12 m2 (130 ft2) facilitates easy plant integration -Same chassis size for each sorting width, allowing for easy upgrade with the same footprint -Capacities of ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
The Eddy Current Separator is used widely in the recycling industry to either recover or remove non-ferrous metals from non-metallic materials. Different designs enable the separation of small (down to 3mm) and large non-ferrous metals. Bunting’s range of eddy current separators include both concentric and eccentric rotor designs that ...
-
Manufactured by Bulk Handling Systems (BHS)based in USA
The NRT MetalDirector sorting system uses sophisticated metal-sensing technology to readily identify and eject ferrous and nonferrous metals from a mixture of materials. The sorter can efficiently recover aluminum cans from a process stream. The sorter features an eddy current induction detection module incorporated into a fast-moving ...
-
Manufactured by WENDT CORPORATIONbased in USA
The X-Tract XRF is designed to process ferrous shred from an automobile shredding operation and targets free copper and copper meatballs with unsurpassed levels of accuracy and efficiency. This automated sorting process will reduce the copper content in your shredded steel significantly, while simultaneously reducing the need for hand ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
Recycling cables has been a profitable business for decades, since copper and aluminium harnessed from old cables can be recycled again and again. Cable recycling is the process of downsizing cables and sorting metal from insulation for the purpose of recycling. The most sought-after resources are copper and ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Eriez ProSort improves metal separation while operating at a fraction of the cost of air power metal sorters. Ideal for scrap processors, the new airless ProSort II doubles the number of metal sensors found on the original ProSort machine and positions them on one-inch centers. These high resolution sensors are aligned with a new inverted ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
The Shred1 Ballistic Separator from Eriez uses ballistics to efficiently separate iron-rich ferrous from much of the mixed metals and waste material in the post drum magnet ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Magnetically designed to provide enhanced separation of non-ferrous metals, the REvX ecs enables the effective separation of non ferrous material whatever the application. Available in different configurations to achieve maximum separation, Eriez standard eddy current separators are ideally suited for purifying cullet and plastics, and ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
A new addition to the diverse range of Eriez non-ferrous metal separators providing unique solutions for the dynamically changing recycling industry. Eriez's new eccentric ECS, RevX-E, is designed with an eccentrically mounted magnetic rotor within the nonconductive larger diameter shell. This eccentric rotor concentrate eddy current ...
-
PremiumManufactured by ACA Industrybased in DENMARK
ACA crusher for recycling of mineral wool, stone wool, Rockwool and other insulation materials. Crusher for recycling of mineral wool, stone wool, Rockwool and Silver foil. The crusher opens and crushes the insulation material and separates it from the wrapping, which is subsequently removed and recycled. The crusher can crush the insulation material to the particle size desired by the customer. ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable ...
-
PremiumManufactured by ACA Industrybased in DENMARK
Crusher for recycling of electronic waste. The ACA crusher crushes electronic waste, separating plastic from metal of the collected electronics from recycling stations as well as new electronic equipment such as computers, loudspeakers, televisions, vacuum cleaners, etc. The ACA crusher crushes electronic waste and separates plastic from ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Woven wire cloth is widely used for filtration and is available in a wide range of materials and mesh sizes. It can be woven from any material which is ductile enough to be drawn into a wire form. Preferred materials are phosphor bronze, stainless steel and monel (nickel alloy). Other materials widely used include aluminium alloys, copper plain mild steel or coated mild ...
-
Manufactured by Picvisa Machine Vision Systems S.L.Ubased in SPAIN
: Cutting-edge LED lighting with a high color rendering index CRI90. VPN internet connection. Secure remote access for supervision, adjustment, and maintenance. Programmable automatic cleaning. MATERIALS AND APPLICATIONS PLASTIC Plastic sorting: color sorting of polyethylene. METALS Metal sorting: ...
-
Manufactured by Binder Cobased in AUSTRIA
The use of waste glass as a secondary raw material requires that cullet is sorted according to optimum purity. Metallic impurities in cullet from waste-glass create unwanted discolourations in the production of new glass and can even damage the glass trough. To efficiently remove these unwanted effects, Binder+Co has developed a compact ...
-
Manufactured by WENDT CORPORATIONbased in USA
sophisticated 12-bit sensors that are capable of 4,096 different states. With the rich contextual information available from the sensors, WENDT/TITECH finders have now graduated into the realm of advanced metals sorting. The WENDT/TITECH finder offers rules based sorting. Decisions can be made based on a variety of characteristics such as signal ...
-
Manufactured by Aco Recyclingbased in TURKEY
DisplayScreen with Touch Feature - Aco Recycling Shredding Module Option for Aluminum, Metal and Plastic - Aco Recycling Crusher Module Option for Glass - Aco Recycling Compaction Module Option for Plastic, Aluminum, Metal - Sorting Module Option - Weight Detection Ability - High Recognition Speed up to 60 Bottles per minute - Liquid ...
-
Manufactured by Anker Andersen A/Sbased in DENMARK
The HLZ DD is the latest generation of our HLZ high-speed counting machines. The machine is designed for handling of mixed batches of non-refillable used beverage containers (PET, glass and metal) or pre-sorted fractions of PET or ...
-
Manufactured by Anker Andersen A/Sbased in DENMARK
The HLZ MD (Mono Disc) is our smallest HLZ high-speed counting machine for installation in e.g. bottle depots and redemption centres with an annual volume of up to 15 million used beverage containers. The machine is designed for handling of mixed batches of non-refillable used beverage containers (PET, glass and metal) or pre-sorted ...
-
based in UNITED KINGDOM
I.C. Electrical Ltd has successfully completed a waste materials recycling facility. The materials recycling facility takes mixed recyclable waste material generated by household waste. These waste materials including paper, cardboard, plastic, glass and metal, are sorted and baled in this ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you