Only show results in Texas? Ok

mixed plastic separation equipment

  • Plastic Separaton Plants

    This separation system was developed to provide the possibility for mechanical plastic recycling to detach mono-fraction plastics from mixed-plastic waste. The aim of a purity of variety that enables the re-use of secondary materials thus obtained for the production of new plastic products has been achieved.The process is based on the fact ...

    By PSR Industrieanlagen- und Verfahrenstechnik GmbH based in Waiblingen, GERMANY.

  • hamos - Model EKS - Electrostatic Plastics Separators

    You can separate mixed plastics waste into its individual components with the hamos EKS electrostatic separators, as well as separating undesired plastic contamination. Using the hamos EKS, your mixed materials can be separated into pure sorted fractions with a minimum of effort by using the tribo-electric behaviour of the different plastics. You ...

    By hamos GmbH based in Penzberg, GERMANY. from Electrostatic Plastics Separators Product line

  • Liquisort - Plastics Separation Technology

    Liquisort Plastics is engaged in separation of PE/PP mixes. This sorting method is based on the difference in density of the plastics to be sorted. This brand new patented technology is especially developed for plastic mixes with particle sizes below 15 mm; existing technologies as NIR (Near Infrared) are not suitable for the sorting of these ...

    By Liquisort B.V. based in Veldhoven, NETHERLANDS.

  • Friction Separation

    Friction Separation is the ideal choice for soiled plastics to be treated in the recycling process. Friction Separators are often used to clean mixed plastics and for highly contaminated films.

    By Summit Recycling Systems Ltd. based in Staffordshire, UNITED KINGDOM. from Friction Separation Product line

  • Premium

    Sorticanter(R) - Flottweg Sorticanter®

    Recycling plastics with the Sorticanter include:► Reduced odor because of closed system► No influence due to the color of the solids to be sorted► Lower thermal energy consumption, since the dewatering phase is already built into each Sorticanter.► Minimum personnel costs, creating operating cost savings ► Separation of mixed substances that are ...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Austin AI - Model QXR-P - Engineered Plastics Sorting & Separating System

    Austin AI's QXR-P is a unique automated system that rapidly and accurately sorts and separates mixed plastic scrap into product specific categories by its chemical composition. Based on proven Energy Dispersive X-ray Fluorescence (EDXRF) technology, the QXR-P system is ideal for plastics recycling.

    By Austin AI, Inc. based in Austin, TEXAS (USA). from Engineered Plastics Sorting & Separating System Product line

  • Pellenc Flake Purifier - Multi Sensor Sorting System for Plastics Recycling

    The FLAKE PURIFIER+ system is especially designed for the sorting of plastic flakes such as PET, HDPE or mixed plastics flakes. Separation of material by air-blast unit. Based on a modular concept these systems allow the combination of all available sensors for contaminant detection: sensors for metal separation, sensors for color separation / ...

    By Pellenc ST based in Pertuis, FRANCE.

  • Friction Separator

    A friction washer or friction separator is a water high-speed cleaning machine for mixed plastics. The system cleans the materials with a high contamination or persistent dirt, for instance, PET and film flakes. Ideally, our friction washer follows both the hot washer as a rinsing unit in the plastic recycling process. Also, B+B supplies ...

    By B+B Anlagenbau GmbH - part of the HEILIG GROUP based in Detmold, GERMANY. from Friction Separator Product line

  • Riko Ekos - Sorting Mixed Communal Waste

    Systems for separating waste; Do you have mixed communal waste and are not sure how to sort it? A mixed communal waste sorting system is made up of several machines that are linked together to create an integrated whole. The purpose of the system is to separate from the mixed communal waste as many grades or materials as possible that can then be ...

    By Riko - Ekos d.o.o. based in Ljubljana, SLOVENIA.

  • Model ZSS - Disc Separator Screen

    For the separation of building rubble, construction waste, plastic or wood chips as well as industrial mixed waste we developed the ZENO disc separator ZSS. It stands out by:

    By ZENO Zerkleinerungsmaschinenbau Norken GmbH based in Norken, GERMANY. from Disc Separator Screen Product line

  • Washing, Separation & Drying Lines for the Plastics Industry

    For post consumer or post industrial second hand, soiled and mixed plastics we provide washing, separation and drying machines and systems. The lines start off with waste material - often pressed in bales - and end up with clean, pure and dry regrind or flakes, ready for densifying, repelletizing or injection-molding. We supply systems for films ...

    By Herbold Meckesheim GmbH based in Meckesheim, GERMANY.

  • Ballistic Separator

    The function of this separator is to ensure the separation of a flow into a mix, in 3 fractions : The majority of the flat bodies and the 2D advance and go up to the top of ballistics The bottle manufactures and the 3D rebound and fall to the bottom of ballistics Fines pass through the holes of the plates and are recovered under the equipment. ...

    By Groupe Vauché based in Sedan, FRANCE.

  • PolyMag - Plastics Seperator System

    The PolyMag process provides an effective and automated means to recover manufacturing scrap and waste for multi-material processors. To do this the PolyMag additive is incorporated into one of the polymers prior to molding, similar to colorant, making this resin susceptible to the very strong magnetic field produced in the Erium Rare Earth roll ...

    By Preferred Recycling Equipment Inc based in Grimsby, ONTARIO (CANADA). from Plastics Seperator System Product line

  • Metal Engineering - Model BMM - Mixer for plastic materials

    The mixer for the plastic materials BMM-40 is intended for mixing and storage of polymer materials (granules with masterbatches, powder, primary and secondary raw materials, plastics of various colors, etc.).The characteristic features of mixer for the plastic materials BMM-40 is:Heavy-duty construction. The powerful, modular stainless steel ...

    By Metal Engineering based in UKRAINE.

  • hamos - Model KRS - Recycling Systems for WEEE Plastics

    The hamos KRS uses field tested dry working electrostatic machines for the separation of wood, rubber, metals and other contaminations to gain high purities of ABS, PS and PP. Mixed Black Plastics are no problem.   hamos supplies a turn-key hamos KRS plastic recycling system for the automatic separation of pre-processed plastic mixtures, ...

    By hamos GmbH based in Penzberg, GERMANY. from Recycling Systems for WEEE Plastics Product line

  • Sesotec - Model FLAKE PURIFIER+ - Multi-sensor sorting system for Plastics Recycling

    Especially for the sorting of plastic flakes such as PET, HDPE or mixed plastics flakes Sesotec provides its FLAKE PURIFIER+ sorting systems.Based on a modular concept these systems allow the combination of all available sensors for contaminant detection: Sensors for metal separation, sensors for colour ...

    By Sesotec GmbH based in Schoenberg, GERMANY. from Multi-sensor sorting system for Plastics Recycling Product line

  • Model SRT 1 - Shredding and Separation Plant

    SRT 1 is first choice for the primary shredding and separation of E-waste, ASR, mixed metals and many more waste materials. swissRTec is able to tailor the system based on your specific requirements of throughput, input material and downstream processing. The unique advantage of the Kubota Vertical Shredder is its ability to liberate and downsize ...

    By swissRTec AG based in Kreuzlingen, SWITZERLAND.

  • Sizing Rollers Used to Separate Materials

    Sizing roller is a term that covers a wide range of parts used to separate materials and finished goods by size or other attributes. Because rollers can be quite specific for a given industry purpose or even a given factory floor, plastic parts from Diversified Plastics, Inc. are smart, cost-efficient options. We can run high and low volumes. We ...

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA). from Sizing Rollers Used to Separate Materials Product line

  • Mixed Construction Waste Sorting Systems

    Input material: Mixed construction waste is a mixture of mineral and non-mineral material such as mixtures of wood, metal, cables, film, packing material, glass, cardboard, paper, plastics etc. The mineral material includes e.g. bricks, tiles , wall debris, stones, concrete etc. Special waste such as roofing felt, asbestos cement, paint, lacquer ...

    By Sutco RecyclingTechnik GmbH based in Bergisch, GERMANY. from Mixed Construction Waste Sorting Systems Product line

  • NRT SpydIR - Model R - Recovers Plastic Containers / Optical Sorter

    Recovers plastic containers by polymer type, in any combination, through the use of reflected near-infrared light. The SpydIR -R is an advanced infrared sorting system that separates selected polymers from a mixed container stream. It uses proprietary technology and fast, highly sensitive algorithms to rapidly identify unique polymer ...

    By Bulk Handling Systems (BHS) based in Eugene, OREGON (USA). from Recovers Plastic Containers / Optical Sorter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you