Only show results available in Virginia? Ok

Mixer Heat Exchanger equipment

  • Fluitec - Model CSE-XR - Mixer/Heat Exchanger

    The design of the mixer / heat exchanger equates to a combination of a static mixer and a multitube heat exchanger in which a highly viscous product on the shell side flows through the static mixer. The advantages of these two distinct systems are aggregated for use at laminar flow.

    By Fluitec mixing + reaction solutions AG based in Neftenbach, SWITZERLAND. from Mixer/Heat Exchanger Product line

  • Premium

    Eimix - Mechanical Sludge Mixers

    Anaerobic digestion is highly dependent upon effective sludge mixing. When tank contents are inadequately mixed, stratification occurs and the volume is not properly utilized. Ovivo's Eimix® sludge mixers are designed to provide powerful mixing without accumulating stringy or fibrous material. In addition, the use of reversing motors enables ...

  • Claro - Water-To-Sludge Heat Exchangers

    Claro designs and manufactures three proprietary heat exchangers that heat, cool, and recover energy by means of water-to-sludge energy transfer. Claro modular tube-in-shell heat exchangers, large gap heat exchangers, and Big Bubble Gun Mixers with heating jackets can suit a wide variety of applications and footprints.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Heat Exchangers & Energy Recovery Product line

  • CTech Europe - Static Mixers for Mixing and Heat Exchange

    Static mixers and Heat Exchangers are used for a wide range of applications including mixing, heat exchange and dispersion, due to numerous unique innovations our products are especially suitable for hygienic processes where CIP (cleaning in place) is required, and also a broad range of temperatures and viscosities.

    By CTech Europe Ltd. based in Neston, UNITED KINGDOM. from Mixing Technologies Product line

  • OTI - Model SB Series - Digester Mixers

    Mounted on and supported by concrete, steel or stainless steel digester covers. Models available for fixed, floating or gasholder digester cover designs. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Upper draft tube and seal cylinder is supported by the cover and moves with floating covers. ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • OTI - Model E - Digester Mixers

    Mounted outside the digester tank wall and supported on a concrete foundation. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Upper and lower wall intake/discharge nozzles terminate with 45° elbows to promote effective mixing. Designs are well suited to add heat exchanger sections as part ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • OTI - Model N Series - Digester Mixers

    Mounted on and supported by concrete, steel or stainless steel digester covers. Models available for fixed, floating or gasholder digester cover designs. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Telescoping draft tube designs allow effective top-to-bottom or bottom-to-top mixing ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • Model Series MF 010 - MF 600 - Conical Screw Vacuum Dryer

    The conical screw dryer is a vacuum contact dryer that is particularly suitable for drying hazardous and toxic products containing solvents or water, to a very low final moisture content, due to its closed design and indirect product heating.

    By Heinkel Drying and Separation Group based in Besigheim, GERMANY. from Dryers & Mixers Product line

  • Euromixers - Static Mixers

    Static mixersandHeat Exchangersare used for a wide range of applications including mixing, heat exchange and dispersion. Due to numerous unique innovations our products are especially suitable for hygienic processes where CIP (cleaning in place) is required, and also a broad range of temperatures and viscosities.

    By Euromixers Limited. based in Cheadle Hulme, UNITED KINGDOM.

  • Vertical Mixers

    The vertical mixers are process units for mixing plants in the chemical, food industry, drinking or process water treatment plants. There are also applications for sewage treatment plants. The mixers homogenize the content of mixtures and solutions, prevent sedimentation, in solid body solution in fluids or gases as well as intensify the heat ...

    By REDOR sp. z o.o. based in Bielsko-Biała, POLAND.

  • Smartrac - Model T/TS - Self Propelled Mixer Feeder

    The Smartrac T consists of a loading system with cutting knives and the Smartrac TS has stationary knives. The Smartrac T/TS is available in 10m³ or 12m³ capacity volumes. As the only self-propelled mixer feeder on the market the Smartrac proves to be a multifunctional help on the farm by offering a complete feed-push system, i.e. one ...

    By Trioliet BV based in Oldenzaal, NETHERLANDS. from Self Propelled Mixer Feeders Product line

  • Model Type VI S - T - Slanting Mixer

    The requirements for a mixer which mixes the material as carefully as possible within short time featuring sealing problems as few as possible have been met for years by developing the Slanting Mixer Type VI S. By arranging the mixing trough under 45 degrees it is possible to move the product horizontally, vertically and radially by means of a ...

  • RESOL - Model FK - Solid Fuel Boiler Controller

    The DeltaTherm® FK Solid fuel boiler controller has been especially developed for systems with solid fuel boilers, water heating stoves or pellet stove heating systems. With the integrated PWM outputs, the DeltaTherm® FK can manage the speed control of 2 high-efficiency pumps. With its easily configurable optional fun

    By Resol GmbH based in Hattingen, GERMANY. from Solar and Heating Controllers Product line

  • STAMIX - Static Mixer

    Static mixer is an efficient mixing equipment with no moving parts. In addition to the oil refining, chemical industry is widely used  in medicine, food, metallurgy, plastics extrusion and environmental protection industries.

    By Sunkaier, LLC based in Wilmington, DELAWARE (USA). from Mixing Equipment Product line

  • Chemineer - Model Biopharm - Sanitary Mixers

    Chemineer's sanitary mixers offer a variety of design configurations, materials and options needed to meet critical sanitary mixing applications and ensure the highest level of sanitary mixing. Chemineer also offers a wide variety of precision-engineered, high-performance impeller options.

    By National Oilwell Varco based in Dayton, OHIO (USA). from Agitators Product line

  • Claro - Model Big Bubble Gun - Gas Mixers

    Claro Big Bubble Gun™ Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Transvac - Tank Jet Mixers

    Transvac Tank Jet Mixers are a mass momentum exchange device which uses the energy of pressurised liquid to entrain, mix and pump a secondary liquid. The principle is used for many process applications including blending, solids suspension, dilution and heat distribution.

    By WWT Magazine based in East Grinstead, UNITED KINGDOM.

  • Powerchip - Model 20 - 50 kW - Wood Chip System

    The fully automatic wood chip system stands out on account of its unique step grate technology that matches the size of the incandescent bed and the boiler output ideally to the prevailing heat demand of the building, as well as by assuring a perfect ash burnout.

    By Guntamatic Heiztechnik GmbH based in Peuerbach, AUSTRIA. from Heating Systems for Grain as Fuel Product line

  • ADMCS - Model 10 - Small-Scale Mixer

    The ADMCS-10 instrument is a small version of the AKUFVE instrument to improve accuracy and rapidity in the measuring technique of solvent extraction distribution data. The instrument is a dynamic-mixer/centri-fugal-separator  (mini-AKUFVE) unit that consists of:

    By MEAB Metallextraktion AB based in Askim/Göteborg, SWEDEN.

  • CARMIX - Model 25 FX - Self-Loading 4×4 Concrete Mixer

    Self-loading 4×4 concrete mixer with 3,450 litre drum (759 gal UK – 911 gal US), front shovel equipped with hydraulic opening gate operating speed from 0 to 10 km/h (0 – 6,21 mph) and road transfer speed from 0 to 24 km/h (0 – 14,91 mph) with electric servo-control. Carmix 25 FX is especially engineered for off-road ...

    By Carmix Hesperia, S.L. based in Noventa di Piave (VE), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you