Only show results in Michigan? Ok

mold contamination equipment

  • Premium

    Jenfitch - Increasing Shelf Life

    JC 9450 increases the shelf life of produce by reducing the bacteria that causes spoilage.  Bacteria and mold are the main causes for food to spoil and be contaminated.  JC 9450 uses the energy of the hydroxyl radical ions that is a part of its oxidative energy to quickly inactivate bacteria without changing the taste of food ...

    By Jenfitch, LLC based in Walnut Creek, CALIFORNIA (USA). from Food Safety & Preservation Product line

  • Odorox - Model HAC06 - Hydroxyl Room Curtain System

    The Odorox HAC06 (Hydroxyl Air Curtain) unit is used to eliminate odors, bacteria, virus, VOC's, off gassing and mold contamination. It is ideal for commercial, institutional, veterinary or hospitality use. It is equipped with switch selectable 2,3,4,5, or 6 Hydroxyl generating optics. The unit is designed for continuous operation to blanket your ...

    By The Hydroxyl Group, LLC based in Westfield, INDIANA (USA). from Heavy Duty Odorox® Products Product line

  • Zefon - Model ZA0020 - Mold Sampling Swabs - 10/Pack

    Sterile surface swabs are an easy way to sample suspect areas for mold contamination. Simply swab the suspect area and submit to a laboratory where the sample will be cultured and the type of mold identified. Each swab comes in an easy to use container for sampling, transport and storage.

    By Zefon International, Inc. based in Ocala, FLORIDA (USA). from Sampling Media - Cassettes / Surface Sampling Product line

  • Odorox - Induct Disinfection Unit (IDU)

    The IDU (Induct Disinfection Unit) is used to eliminate odors, bacteria, viruses, off gassing and mold contamination. This unit is ideal for medical, clinical, institutional, veterinary, hospitality or residential use. It is equipped with a selector switch for 1 or 2 hydroxyl generating optics. The unit is designed for continuous operation through ...

    By Odorox Air Technology Corp. A Division of Bio-Shine, Inc. based in Spotswood, NEW JERSEY (USA). from Light Commercial / Residential Product line

  • Mycometer Surface - Mold Contamination Testing Tool

    Mycometer-surface is a versatile analytical tool for testing surfaces and bulk materials for mold contamination on-site. This method was developed by research mycologists at the University of Copenhagen in collaboration with building inspectors and mold remediation specialists. The aim was to specifically develop a method to quantify the level of ...

    By Mycometer based in Horsholm, DENMARK.

  • Odorox - Model MDU - Air Processor Unit

    The Odorox MDU (Mobile Disinfection Unit) is the right choice for medical, clinical, institutional, veterinary or hospitality use. The Mobile Disinfection Unit is finely tuned to treat odors associated with bacterial, viral and mold contamination. The Odorox® MDU is designed to decontaminate up to a 2000 sq ft of space. It is equipped with a ...

    By Odorox Air Technology Corp. A Division of Bio-Shine, Inc. based in Spotswood, NEW JERSEY (USA). from Light Commercial / Residential Product line

  • Odorox Hydroxyl - Model HRC06 - Room Curtain Unit

    The HRC06 (Hydroxyl Room Curtain) unit is used to eliminate odors, bacteria, virus, voc’s, off gassing and mold contamination. It is ideal for commercial, institutional, hazmat, veterinary or hospitality use. It is equipped with switch selectable 3 or 6 ODOROX® Hydroxyl generating optics. The unit is designed for continuous operation to ...

    By Odorox Air Technology Corp. A Division of Bio-Shine, Inc. based in Spotswood, NEW JERSEY (USA). from Commercial / Restoration Product line

  • Gating system

    Trend aofu produces a full line of gating system for the foundry and investment casting industries. Trendaofu gating systems, manufactured from specially formulated ceramic bodies. Gating systems are available for special applications Trend aofu gating system are non-eroding, and assure a smooth slag-free passage of metal to mold cavity without ...

    By Trend Aofu based in Tongzhou District, CHINA.

  • Odorox - Model Decon™ - Scrubbers Unit

    The ODOROX Decon Scrubber unit is the right choice for removal and decontamination of large volumes of particulate and pollutants from the air. The ODOROX Decon Scrubber unit is finely tuned to eliminate odors and particulate associated with bacterial, viral and mold contamination. The ODOROX Decon Scrubber  unit is designed for removal of ...

    By Odorox - HGI Industries Incorporated based in Boynton Beach, FLORIDA (USA).

  • Odorox Decon Scrubber - Air Processor Unit

    The ODOROX® Decon Scrubber™ unit is the right choice for removal and decontamination of large volumes of particulate and pollutants from the air. The Decon Scrubber unit is finely tuned to eliminate odors and particulate associated with bacterial, viral and mold contamination. The purpose of this unit is to remove of large amounts of ...

    By Odorox Air Technology Corp. A Division of Bio-Shine, Inc. based in Spotswood, NEW JERSEY (USA). from Commercial / Restoration Product line

  • Micro-Tape

    The Micro-Tape is used to take surface samples for mold and microbial contaminants. The easy to use design is perfect for any IAQ Professional.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Sampling Supplies & Acc. Product line

  • Quartz - Model 2Fit™ - GC Column Storage Caps - Color Coded

    Best practices in GC require sealing you column against atmospheric contaminants when it’s not in use. The bonded stationary phase in a GC column is easily oxidized, particularly in the presence of UV light. Be sure to cap the ends of the column to seal in inert carrier gas and stop air getting in. Also, chunks of old septa carry myriad ...

    By InnovaQuartz LLC based in Phoenix, ARIZONA (USA). from Surgical Accessories Product line

  • Tape Lift Kit (25 pack)

    The Tape Lift Kit is used to take surface samples for mold and microbial contaminants. The easy to use design is perfect for any IAQ Professional.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Sampling Supplies & Acc. Product line

  • Tape Lift Kit (10 pack)

    The Tape Lift Kit is used to take surface samples for mold and microbial contaminants. The easy to use design is perfect for any IAQ Professional.

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Sampling Supplies & Acc. Product line

  • Airfree - Model Tulip 1000 - Filterless Silent Air Purifier

    Airfree Tulip 1000 Filterless air purifier with beautiful color changing technology is maintenance free and totally silent featuring the patented Thermodynamic TSS Technology gradually destroys mold, allergens, dust mites, bacteria, viruses, pollens, pet dander, tobacco, ozone and other organic pollutants. It is perfect for mold contaminated areas ...

    By US Air Purifiers LLC based in Peoria, ILLINOIS (USA). from Airfree Air Purifiers Product line

  • Sporicidin - Microbial Test Kit

    Sporicidin Microbial Test Kit is an easy, fast, and accurate tool for detecting potential micro-organisms on many common interior surfaces. It detects the presence of protein-containing contamination, such as bacteria, mold, fungi, blood and body fluids, as well as typical allergen contaminants in as little as one minute. The Sporicidin Microbial ...

    By Contec Professional, Inc. based in Spartanburg, SOUTH CAROLINA (USA). from Biohazard and Forensic Restoration Product line

  • Water-Based Biodegradable Mold Removal Cleaner

    Endurance BioBarrier Cleaner Prep is a powerful mold removal cleanerthat is water-based, environmentally friendly, and contains zero VOCs. It is designed to remove mold, mildew, and surface contaminants with ease and minimal effort. Use Endurance BioBarrier Cleaner Prep to clean and prepare any surface for our protective mold prevention coating. ...

    By Hilltop Distribution, Inc. based in Camarillo, CALIFORNIA (USA).

  • SABER PRO - Model 24V - UV Coil Clean System

    The proprietary Sanuvox Saber Pro 24V UV Object Purifier is designed to bask the evaporator coil with UVC Germicidal Energy, preventing and destroying mold, biological odors and other microbial contaminants. A coil with bio-film (a coating of microbial growth) acts as an adhesive, attracting dirt and coating the fins of the coil. This typically ...

    By Sanuvox Technologies Inc. based in QUEBEC (CANADA). from Coil Sterilization Product line

  • SABER MAGNET - Model 24 Volt - UV Coil Clean System

    The 24V 16″ Ultraviolet Lamp System is designed to bask the evaporator coil with UVC Germicidal Energy, preventing and destroying mold, biological odors and other microbial contaminants. A coil with bio-film (a coating of microbial growth) acts as an adhesive, attracting dirt and coating the fins of the coil. This typically results in an ...

    By Sanuvox Technologies Inc. based in QUEBEC (CANADA). from Coil Sterilization Product line

  • Sanuvox - Model Saber - High Intensity Quartz LV Purifier

    The Sanuvox Saber is our entry level Ultraviolet Air Purifier which employs a High Intensity Quartz UV Germicidal Lamp to destroy biological contaminants such as mold, bacteria and viruses. Like its namesake, the Sanuvox Saber is designed to kill. The Saber uses UVC Energy to slice through the air, destroying the biological contaminants which come ...

    By Sanuvox Technologies Inc. based in QUEBEC (CANADA). from Residential UV Air Purifiers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you