Only show results in Connecticut? Ok

mold removal equipment

  • Fogmaster NozLJet - Model 7807 - Fogger

    The 7807 fogger, hose and wand is an ideal tool for the application of biocides, disinfectants and antimicrobials. This item features a hose and 16″ wand for on-target output or spot fogging, and a one-turn valve to adjust droplet size. The powerful blower discharges 30 cubic/feet per minute.

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal Equipment Product line

  • ShockWave - For Mold Removal and Mold Prevention

    ShockWave is being discontinued from this site.  1 gallon Shockwave is no longer available.  10 oz. Shockwave available while supplies last.  EPA-registered ONSLAUGHT disinfectant has replaced ShockWave on this site.

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • MMR - Mold Stain Remover

    MMR mold stain remover is the most effective mold remover on the market.  Designed for easily removing mold stains from building materials such as the wood found in attics and crawl spaces - along with numerous other surfaces including concrete, cinder block, hardiboard and vinyl siding. The MMR mold stain remover application process reduces ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • MMR - Pump Sprayer

    Make the application of MMR mold stain remover easier with this field tested electric pump sprayer. A Shurlfo pump powers 1.8 gallons per minute through the functional spray wand. The sprayer was designed to better-withstand the chemical nature of MMR. This system has been used for years by Mold Solutions, the largest and longest-standing MMR ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • MMR - Model MPI - Antimicrobial - Amino-Functional Silane (Si-QAC)

    Based on chemistry that was developed by Dow Chemical, MPI is an amino-functional silane (Si-QAC) formulated to create a built-in antimicrobial/antibacterial surface barrier that gives building materials the ability to inhibit the growth of mold, mildew and bacteria.

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • Bad Axe - Ravage Rinse Foaming Cleaner

    Ravage Rinse is a super concentrate, non-residue forming wettable powder that uses the power of oxygen for surface preparation, source removal and organic stain removal. It is an ideal product for mold remediation, fire, sewage, Category 2 and Category 3 water loses, trauma, post-mortem and crime scene clean-up projects. Ravage Rinse is completely ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • Bad Axe - Particulate Conqueror

    Bad Axe Particulate Conqueror is designed to control dust and mold in remediation, demo, water/fire-restoration cleanup and construction projects.  Particulate Conqueror coalesces airborne and surface-borne particulate debris, immobilizing them, and increasing their mass.  Its knockdown effect increases the HEPA capture ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • Bad Axe - Wicked White

    Bad Axe Wicked White is a thick, interior-grade coating. Designed for porous surfaces and other areas where a single coat is wanted. Manufactured with antimicrobial ingredients, this coating is designed to inhibit the growth of stain and odor causing mold, mildew and other microorganisms on the dry coating surface. Bad Axe Wicked White ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Mold Removal and Mold Prevention Product line

  • Bad-Axe - Model MMR - Mold Stain Remover

    All MMR mold stain remover orders of 4 gallons or more ship free! MMR mold stain remover has quickly become the industry's  'go-to-product' for mold-related projects.  MMR mold stain remover is a commercial-grade mold and mildew stain remover formulated to immediately remove mold and mildew stains present on wood, concrete, cinder block, ...

    By Bad Axe Products, LLC. based in Frankfort, ILLINOIS (USA).

  • Premium

    Sauereisen - Model No. 600/610 - Sulfur Base Mortars Basolit/Carbon Basolit

    Sauereisen 600 and 610 Sulfur-Based Mortars are used for concrete test cylinders and as a compound in the manufacturing of abrasive grinding wheel arbor holes. 600 is also used in the assembly of porcelain ceramic insulators in electrical transmission markets. 600 and 610 Sulfur-Based Mortars have a history of corrosion control when used in the ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Corrosion Protection - Mortars Product line

  • Water-Based Biodegradable Mold Removal Cleaner

    Endurance BioBarrier Cleaner Prep is a powerful mold removal cleanerthat is water-based, environmentally friendly, and contains zero VOCs. It is designed to remove mold, mildew, and surface contaminants with ease and minimal effort. Use Endurance BioBarrier Cleaner Prep to clean and prepare any surface for our protective mold prevention coating. ...

    By Hilltop Distribution, Inc. based in Camarillo, CALIFORNIA (USA).

  • Water Based Coatings Mold Removal Cleaner

    Endurance Bio Barrier formulas are revolutionarywater-based coatingsthat have been laboratory and military tested and proven to inhibit the growth of molds, mildew, and germs on the film of the treated surfaces. Our mold inhibitor products are the perfect mold prevention solution for homes, vehicles, boats, schools, manufacturing and institutional ...

    By Hilltop Distribution, Inc. based in Camarillo, CALIFORNIA (USA).

  • Two-Mass - Vertical Shakeouts

    Designed to handle the world’s largest castings, General Kinematics vertical shakeouts quickly and efficiently remove mold sand from castings. Unique two-mass design automatically compensates for varying load conditions, assuring non-dampening shakeout performance.

    By General Kinematics based in Crystal Lake, ILLINOIS (USA). from Foundry - Vibratory Drums And Shakeouts Product line

  • Fiberlock - Model 8315-5 IAQ 1000 - Hydrogen Peroxide Stain Remover

    Our ready-to-use, hydrogen peroxide-based mold stain remover is suitable for use on water damage restoration projects to remove stains from mold and mildew. IAQ 1000 is pH-neutral and contains an agent that will whiten and brighten stained surfaces, without the harmful bleach ingredients.

    By Fiberlock Technologies, Inc. based in Andover, MASSACHUSETTS (USA). from Mold Products - Cleaners and Stain Removers Product line

  • Ducta-Screen Rotary Shakeout

    The DUCTA-SCREEN rotary shakeout quickly and efficiently processes molds to separate and remove sand from castings. Sand is broken down, leaves the rotary shell, and is deposited on GK’s vibratory sand take-away conveyor. The removal of sand from the rotary shell allows cooler equipment temperatures, allowing for increased equipment and component ...

    By General Kinematics based in Crystal Lake, ILLINOIS (USA).

  • 3M - Model 60923 P100 - Organic Vapor and Acid Gas Cartridge with Filter

    This combined organic vapor and acid gas cartridge with P100 filter provides protection against certain organic vapors, acid gases, and particulates. It can be used by professionals in a variety of applications, including petrochemical, laboratories, pharmaceutical, and chemical manufacturing. It is approved by NIOSH and ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Protective Gear Product line

  • 3M - Model 6000 Series - Full Face Respirator

    This 6000 Series full face Respirator from 3M helps provide respiratory protection from a variety of gases, vapors, and particulate hazards at concentrations up to 10 times the permissible exposure limit (PEL) when properly fitted and used with approved 3M cartridges and filters. It features air purifying respirator (APR), ...

    By Fast Mold Removal based in Roselle, ILLINOIS (USA). from Protective Gear Product line

  • Ducta-Screen - Rotary Shakeout

    The DUCTA-SCREEN rotary shakeout quickly and efficiently processes molds to separate and remove sand from castings. Sand is broken down, leaves the rotary shell, and is deposited on GK’s vibratory sand take-away conveyor. The removal of sand from the rotary shell allows cooler equipment temperatures, allowing for increased equipment and ...

    By General Kinematics based in Crystal Lake, ILLINOIS (USA). from Foundry - Rotary Drums And Shakeouts Product line

  • Irritrol - Model SL Series - Sprayheads

    Compact slimline body design. Available with pre-installed Variable Arc Nozzles in four radii (10', 12', 15' and 17'). Matched precipitation rate nozzles provide even coverage. Adjustable arc patterns from 25°-360°. Debris labels on models without nozzles for easy flushing. Pressure-activated seal reduces flow-by during pop up and keeps ...

    By Irritrol Systems Europe S.r.l based in Fiano Romano (RM), ITALY. from Sprayheads Product line

  • Molded Gauge Diaphragm

    This innovative new product was developed to solve many common problems associated with polymer type diaphragms seals. Due to the all molded design the gauge cannot be removed from the seal, preventing loss of fill – And There is no chance of cracking the upper housing by over tightening the gauge. This product is also molded of a harder blend of ...

    By Blue Ribbon Corp. based in Grand Island,, NEW YORK (USA). from Diaphragm Seals Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you