monitoring of hot gases equipment

NEO Monitors LaserGas iQ2 analyzer is the first to measure up to four gases (O2, CO, CH4, H2O)* and temperature depending on configuration, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched reliability and durability. By ...

By NEO Monitors AS based in Skedsmokorset, NORWAY.

The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Gas Velocity Monitor Product line

The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Hot Extractive Multi-Channel Gas Analyser System Product line

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flue Gas Flow Monitor Product line

PEN3 is the essential electronic nose for food and pharmaceutical industries (quality control purposes as well as for environmental monitoring (recognition of emission sources).  It is a small, fast and robust identification system for gases and gas mixtures. Gas detection is performed with an array of gas sensors. Single compounds or ...

By PCA Technologies SRL based in Pogliano Milanese, ITALY.

The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dual Pass Opacity / Dust Monitor Product line

The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust in flue gases. Opacity, Dust mg/m2, Normalised Dust mg/Nm2. The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Dual Pass Opacity/Dust Monitor (Integrated Version) Product line

The AMETEK Western Research Model 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. With the addition of an optional zirconium oxide sensor, the Model 920 is capable of monitoring oxygen.

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Hot/Wet Multi Gas CEM Product line

Measurement through flames and hot gases in flame heated furnaces at temperatures between 200...800 °C (MC320F, MC320FE) and 400...1600 °C (MC320FHT, MC320FHTE).

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Thermal Imagers Product line

The AMETEK Process Instruments Model 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the ...

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Hot/Wet Multi Gas Mass Flow CEM Product line

A precise, fixed thermal imager with borescope and wide field-of-views for maximum monitoring coverage requiring only a small diameter access hole through the furnace wall. Various lens and borescope lengths allow for installation and application flexibility. FTI-EB is a high-accuracy, fixed thermal imaging camera, optimised for use in ...

By AMETEK Land based in Dronfield, UNITED KINGDOM. from Furnace Monitoring System Product line

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Multi Channel Extractive Flue Gas Analyser Product line

Gasmet DX4000 is portable FTIR gas analyzer for applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas. It is the world’s smallest FTIR emissions monitoring system.

By Gasmet Technologies Oy based in Helsinki, FINLAND. from Portable FTIR Gas Analyzer Product line

Continuously measure Furnace Exit-Gas Temperature (FEGT) using Non-Contact Infrared Sensors to optimize overall performance of boilers and furnaces under varying conditions of coal quality, load, ash fouling, and slagging. In many combustion processes, one of the main combustion gases is CO2. Therefore, measuring the CO2 gas temperature is a ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Furnace Exit-Gas Temperature (FEGT) Measurement System Product line

The Semi-hot Cell represents a complex workplace for treating solid or liquid radioactive emitters and provides personnel with maximum radiation protection. The actual model can be adapted to the particular needs of the user.

By VF, a.s. based in Černá Hora, CZECH REPUBLIC. from Semi-Hot Cell System Product line

atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and H2O is ...

By Protea Limited based in Middlewich, UNITED KINGDOM. from Continuous Emissions Monitoring FTIR Product line

ETG atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and H2O ...

By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Complete Emissions Monitoring System Product line

Measure hot and dusty gases: anytime – anywhere. McON air portable provides you the same robust, drift and calibration free measurement like McON air but as mobile device. Take the complete set for measuring hot and dusty flows of process gas with you, even on an aircraft. Find out in any plant, what the gas flows are. This device gives you ...

By Promecon process measurement control GmbH based in Barleben, GERMANY. from Air Monitoring Portable Device Product line

The Surefire SA range of cremators have numerous examples throughout the world and offer an efficient and environmentally clean solution to the problems associated with the disposal of animal carcasses.

By Matthews Environmental Solutions Ltd. based in Hyde, UNITED KINGDOM. from Hot Hearth Model of Cremators Product line

atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and H2O is ...

By Protea Limited based in Middlewich, UNITED KINGDOM. from CEM Continuous Emissions Monitoring FTIR Product line