multigas calibration Equipment

120 Results found
Only show results available in Virginia?
OK
  • Keyword: multigas calibration ×

Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

HORIBA - Model APMC-370 - Air Pollution Multigas Calibrator

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

APMC-370 is designed to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations, in laboratories for quality assurance and also in the production of gas analyzers.

TAPI - Model T700 - Multigas Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700 is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations using up to 4 gas sources.

TAPI - Model T700U - Dynamic Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700U is a microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero checks using up to 4 gas sources.

TAPI - Model T700H - Source Gas Blending and Dilution Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T700H is a microprocessor controlled dilution system for calibration of continuous emissions monitoring gas analyzers. It enables significantly reduced cylinder use and cost while improving on-site flexibility for gas concentrations and converter efficiency checks. The instrument is designed to meet or exceed the performance requirements ...

TAPI - Model T701H - High Performance Zero Air Generator with TCP/IP MODBUS

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The T701H adds Modbus TCP/IP connectivity to the proven reliability and performance of our high purity zero air system. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature and output pressure. Additionally, this digital access provides the ability to remotely disable the ...

TAPI - Model T701 - Zero Air System

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The T701 adds Modbus TCP/IP connectivity to the proven reliability and performance of our zero air systems. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature, and output pressure. Additionally, this digital access provides the ability to remotely disable the internal pump, ...

TAPI - Model T703U - Ozone Photometer Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T703U is a microprocessor controlled ozone calibrator for precision gas analyzers. Expanded ozone audit levels have created a need for precise ozone calibration well below the capabilities of standard calibrators. The Model T703U is designed to meet the requirements of ultra-low ozone production.

TAPI - Model T703 - Ozone Photometer Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T703 is a microprocessor controlled ozone calibrator for precision gas analyzers. The Model T703 can deliver concentrations from 50 ppb to 5 ppm at flows from 1 LPM to 5 LPM.

TAPI - Model 702 - Precision Gas Calibrator

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 702 Precision Calibrator provides an ideal means of calibrating ambient air analyzers, in an economical, high-value manner.

Sonimix - Model 3012/3022 - Gas Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The multigas calibrator with GPT, ozone and self re‐generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

Sonimix - Model 6000 C2 - Station Calibration Systems

by LNI Swissgas     based in Chatelaine-Geneva, SWITZERLAND

The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

Environnement S.A. - Model MIR FT - Multi-Gas Infra Red Fourier Transform (FTIR)

by Environnement S.A     based in Poissy, FRANCE

Multi-gas Infra Red Fourier Transform (FTIR). A single analyzer for the measurement of multiple gases: NO, NO2, NOx, N2O, CO, CO2, SO2, HCl, HF, CH4, TOC, NH3, H2O, O2.

Environnement S.A. - Model GRAPHITE 52M - Heated FID Total Hydrocarbon (THC, COV, CH4) Analyzer

by Environnement S.A     based in Poissy, FRANCE

Heated FID Total Hydrocarbon (HC) Analyzer. -MCERTs and TÜV certified -Complies with EN 12619 & 13 526 standards (with He/H2 fuel) -Fitted with FID for continuous and simultaneous measurement of Total Hydrocarbons (THC), Non-methanic Hydrocarbons (NmHC) and Methane (CH4) in compliance with EN 12619

Environnement S.A. - Model MIR 9000 CLD - New Compact Multi-gas Analyzer

by Environnement S.A     based in Poissy, FRANCE

Multi-gas Infra-Red GFC Analyzer (CLD-Chemiluminescence option). A unique analyzer for: NO, NO2, NOx, N2O, CO, CO2, SO2, HCl, HF, CH4, TOC and O2. Optional measurement of NOX by chemiluminescence.

MKS MultiGas - Model 2030 CEM - Gas Analyzer for Continuous Emissions Monitoring

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

MultiGas 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas mixtures.

Model LAS 300 XD - Cross duct TDL laser Gas monitor

by Environnement S.A     based in Poissy, FRANCE

Environnement S.A introduces the state-of-the-art laser based analysers to cover number of applications for CEMS regulatory as well as process control such as: Coal Fired Boiler HCl Measurement on Dry FGD Scrubber Stack, Brick manufacturer HCL Stack Measurement, Incinerator HCl Measurement, Aluminium Smelter HF Measurement, Coal Fired Boiler SNCR ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Model MGC101 - Multigas Multi-point Calibrator

by Norditech Pty Ltd     based in Arndell Park, AUSTRALIA

Multi-gas calibrator for ambient air gas analyzer calibration.

Model GIR250 - Oxygen and Carbon Dioxide Analyser (Bench Top)

by Hitech Instruments - part of Eaton Electrical     based in Luton, UNITED KINGDOM

The GIR250 is designed to monitor percentage levels of oxygen and carbon dioxide in a single, robust unit. Based on our galvanic (electrochemical ) cell measuring principle for oxygen measurement, and the infra-red principle for carbon dioxide, the GIR250 provides a permanent display of both gases up to a resolution of 0.01%. The instrument can be ...

Need help finding the right suppliers?

Let the XPRTs do the work for you