Mussel Equipment
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Ecosystem Restoration | Habitat For Biological Water Purification Systems; Growth of some biological water purification systems (like mussels or aquatic plants) requires artificial structures as starting point. But artificial materials can long-term pollute the environment. In search of a functional structure, which does not harm the ...
-
Manufactured by Kramer Machinesbased in NETHERLANDS
The SV300 Stone catcher is designed to remove small stones from between the mussels. The mussels are fed to the Stone catcher. By means of a sliding plate, the mussels slide into a water tank. The water in the tank flows from bottom to top. The mussels are taken by the water stream and discharged via a conveyor belt. The stones ...
-
Manufactured by Besnardbased in FRANCE
Allows safely emptying an entire container in the rest of the ...
-
Premiumbased in NETHERLANDS
The unique patented product, the ‘Biobullet’, were developed by leading scientist at Cambridge University. The products are optimally engineered to remove costly biofoulers from industrial infrastructure, thereby increasing the efficiency and lifespan of industrial plants and their component ...
-
Premiumbased in NETHERLANDS
H2O Biofouling Solutions has developed a monitor called the Biovision Monitor which can be installed at a critical spot in the service water system, e.g. in front of the heat exchangers. The monitor contains five fouling coupons and can be connected as a bypass to the water system. The monitor is designed to create a range of water flows and turbulences along with the fouling coupons which cover ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Industrial water systems often represent an ideal place for the growth and multiplication of microorganisms, due to e.g. the presence of nutrients, favourable temperatures, high residence time and ratio of surface area to system volume. With these conditions, a high bacterial proliferation can lead to biofilm development and subsequent problems like decrease of system performance and material ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Industrial water systems often represent an ideal place for the growth and multiplication of microorganisms. This microorganisms can cause numerous problems in aqueous systems, including slime deposits, microbiologically induced corrosion, unpleasant odors and hazardous gases. Pulp preparation and circulating water systems are also heavily loaded by a large number of dissolved organic components. ...
-
Premiumbased in NETHERLANDS
Prevent biofouling issues, H2O developed the EcodosingTM methodology. The Ecodosing method results in a dosing procedure which is tailored to the specific local requirements to prevent biofouling settlement and growth. This will reduce the overall chemical dosing up to 50% which results in significant O&M cost benefits. In addition, since Ecodosing requires less biocide and guarantees ...
-
Manufactured by Cavitcleaner Limitedbased in MALTA
Turbo Jet gun is suitable to removing hard encrustations (barnacles, mussels, etc). Turbo Jet gun is manageable, easy and safe to use. Turbo Jet is balanced with rear jet suitable to Bombardier machine and is compatible with many high pressure ...
-
Manufactured by Cavitcleaner Limitedbased in MALTA
Evo2 is the cavitational gun capable of removing any kind of encrustations, from light fouling to acorn-shells and mussels. Evo2 is manageable and easy to use and among its strengths, there is the safety of use even for the most inexperienced operator. Evo2 is available in sizes: S, M, L. It is compatible with most of high pressure ...
-
Manufactured by Kemisanbased in TURKEY
The businesses nearby the seaside can produce their own Chlorine (NaOCl) by using only seawater and electricity via Clorel®. Besides cost saving and sustainable business model, the businesses can get higher disinfection capability with fresh and active chlorine. Thus, they can overcome Seawater Problems (Biofouling) with Seawater ...
-
Manufactured by Reagen LLCbased in USA
Contact Angela: reagenllc@gmail.com 80%), Rapid (10 - 30 minutes), and cost-Effective Extraction Methods • High sensitivity (0.02 ng / g or ppb) and low detection limit (1.2 ppb for mussel samples and 0.4 ppb for water samples) • High reproducibility • A quick ELISA assay (less than 1.5 hours regardless of number of samples) Sample ...
-
Manufactured by New Nautical Coatings, Inc.based in USA
Ideal for both sail and powerboats alike, Islands 99 plus delivers effective dual-biocide antifouling power at an affordable price. It’s unique formulation deters hard shell growth like barnacles and mussels while keeping soft growth such as algae, slime and grass at bay. Easy to apply and clean, Islands 99 plus bottom paint is ...
-
Manufactured by AquaDectbased in NETHERLANDS
In situations where there is no or limited food availal the water, bivalves will suffer from starvation, mussels will not always have their shells open. This hampered proper application of the MOSSELMONITOR in e.g. ground- or drinking water. This problem was solved by continuous feeding of the mussels with an algal suspension, ...
-
Manufactured by Reagen LLCbased in USA
Contact Angela : reagenllc@gmail.com Product Description REAGEN™ Okadaic acid elisa kit is a competitive enzyme immunoassay for the quantitative analysis of Okadaic Acid (DSP) in mussels and water samples. The unique features of the kit are: • High recovery (80-105%), rapid (10-30 minutes), and cost-effective extraction methods • High ...
-
Manufactured by ATS Innova Clean Water Solutionsbased in USA
Our plant has algae and invasive mussels. Is there a fast and effective water treatment that's also safe for humans, animals and fish that will eradicate both algae and invasive ...
-
Manufactured by Acquaeco S.r.lbased in ITALY
Ecomix is a compact, polypropylene protein skimmer that uses a venturi air injection system to aid the process of skimming. Ecomix is capable of treating 1 a 3 mc/h and is particularly suitable for small closed circuits, for the purification and the continued life of mussels, fish and shellfish. Ecomix is available with various ...
-
Manufactured by Acquaeco S.r.lbased in ITALY
Ecoskim is a compact, polypropylene protein skimmer that uses a venturi air injection system to aid the process of skimming. Ecoskim is capable of treating 3 to 5mc/h and is particularly suitable for small closed circuits, for the purification and the continued life of mussels, fish and shellfish. Ecoskim is available with various ...
-
Manufactured by ClickSonic AGbased in SWITZERLAND
The Y-Sonic 10 Antifouling Algae Destroyer prevents the adhesion of algae and mussels in the area of max. 10m ship length. Ship hulls that are already infested are also permanently freed from algae and ...
-
Manufactured by ClickSonic AGbased in SWITZERLAND
The Y-Sonic 20 Antifouling Algae Destroyer prevents the adhesion of algae and mussels in the area of max. 20m ship length. Ship hulls that are already infested are also permanently freed from algae and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you