Nanofiltration Equipment | Environmental XPRT

Premium

ProMinent Dulcosmose - Model NF - Nanofiltration System

Permeate outputs from 1 to 50 m3/h, higher outputs possible on request. As a nanofiltration system, the Dulcosmose NF, a compact and value-for-money unit, can take over partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low investment and operating costs thanks to the latest 'ultra low ...

By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Membrane Technology and Membrane Filtration - Nanofiltration Product line

Premium

SnowPure ExcellNano - Process Nanofiltration (NF) Membranes

SnowPure’s ExcellNano process nanofiltration (NF) membranes are uniquely designed for special process separations.

By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA). from ExcellMembranes - Membrane Separation Technologies Product line

KMS - Model TFC NF Series - Fluid Systems

Nanofiltration excels at removing only divalent and larger ions while allowing monovalent ions such as sodium and chloride to pass through, making them ideal for desalting the process stream. KMS NF membranes are thin film composite (TFC) membranes, providing the most cost-effective solution to the market. Whatever your industry requirements, from ...

By Koch Membrane Systems, Inc based in Wilmington, MASSACHUSETTS (USA). from Nanofiltration Product line

TriSep - Model TS40 - Membrane Elements

TriSep TS40 Membranes are primarily used in food & dairy and other process applications to separate, purify and desalt organic solutes. TS40 is a piperazine-based nanofiltration membrane with a molecular weight cut-off between 200-300 Daltons. Typical applications include demineralization of whey or lactose, sugar concentration, or separation ...

By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Nanofiltration Membranes Product line

Model 4 Inch - Sanitary Nanofiltration Elements

4' NF elements are ideal for low volume production operations or large scale pilot studies. Synder's sanitary elements are fully USDA compliant and offer excellent rejection of divalent and multivalent ions. Consistently displaying an unmatched combination of flux and rejection against the industry standard, the NFX and NFW membranes are ideal ...

By Synder Filtration based in Vacaville, CALIFORNIA (USA). from Nanofiltration Elements Product line

TriSep - Model TS80 - Polyamide Nanofiltration Membrane

TriSep TS80 Membrane is a polyamide nanofiltration membrane with a nominal monovalent ion rejection of 80-90% and >99% rejection of divalent and polyvalent ions. As a result TS80 is considered a “softening” membrane with a typical feed pressure of about 100 psi. TS80 has a molecular weight cut-off between 100-200 Daltons, enabling ...

By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Nanofiltration Membranes Product line

TriSep - Model SB90 - Cellulose Acetate NF Elements

TriSep SB90 Membrane combines the chlorine tolerance of a cellulose acetate membrane with the high polyvalent ion rejection and lower pressure requirements of a nanofiltration membrane. SB90 elements are primarily used in beverage applications where residual chlorine is desired to protect against biogrowth.

By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Nanofiltration Membranes Product line

Model 2 Inch - Sanitary Nanofiltration Elements

Synder Filtrations's 2' sanitary nanofiltration elements are revolutionizing liquid separation with an unmatched combination of flux and rejection. With a pore size range of 150-500D, Synder's nanofiltration elements greatly reduce levels of hardness, nitrates, sulfates, tannins, turbidity, color, and TDS (including moderate levels of salt). ...

By Synder Filtration based in Vacaville, CALIFORNIA (USA). from Nanofiltration Elements Product line

TriSep - Model XN45 - Membrane Elements

TriSep XN45 Membrane is used for both process streams as well as low pressure water purification. XN45 is a piperazine-based nanofiltration membrane with a molecular weight cut-off of approximately 500 Daltons. Its nominal solute rejection is 10-30% for NaCl and greater than 90% for MgSO4 and sucrose. Typical applications include demineralization ...

By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Nanofiltration Membranes Product line

TriSep - Model UA60 - Piperazine-Based Thin-Film Composite Membrane

TriSep UA60 Membrane is a piperazine-based thin-film composite membrane that is considered both a “tight” UF membrane as well as an “open” or “loose” NF membrane. UA60 has limited monovalent salt pore size and MgSO4 pore size between 70-90%. UA60 has a molecular weight cut-off between 1,000-3,500 Daltons. Due to ...

By TriSep Corporation based in Goleta, CALIFORNIA (USA). from Nanofiltration Membranes Product line

Enviromatch - Model NanoMatch 400 - Nanofiltration Systems

25 years operational experience, you can count on ClearMatch 100 series water filters to remove suspended materials, turbidity, odors, taste, chlorine and iron in various water treatment applications. This series features Fleck automatic backwash valve and 100% corrosion resistant high performance composite and fiberglass tanks. The inner shell of ...

By Enviromatch, Inc. based in Murrietta, CALIFORNIA (USA). from Nanofiltration Systems Product line

DOW FILMTEC - Model BW30-440i - High-Productivity Element for Reverse Osmosis & Nanofiltration System

The DOW FILMTEC BW30-440i element is a high-productivity element combining the highest active membrane area available with the high rejection BW30 membrane. It is designed to minimize capital expenses in high-purity industrial water applications without increasing operating flux. The elements uses iLECc interlocking end caps which reduce system ...

By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Reverse Osmosis & Nanofiltration Product line

DOW FILMTEC - Model SW30-2514 - Sea Water Desalination Membrane Elements

DOW FILMTEC SW30-2514 membrane elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. DOW FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.

By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Reverse Osmosis & Nanofiltration Product line

DOW HYPERSHELL - Model NF245-8038 - Nanofiltration Membrane Sheet for Food Grade Elements

DOW HYPERSHELL NF245-8038 contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing monovalent salts. It is designed to withstand rigorous processing applications and conditions, and minimizes dead flow areas and element by-pass.

By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Reverse Osmosis & Nanofiltration Product line

DOW FILMTEC - Model BW30-365 - High Performance and Maximum Element

DOW FILMTEC BW30-365 provides consistently high performance and maximum element life when treating difficult feed waters. This element offers proven performance, high rejection, and exceptional robustness and durability across a wide range of feed conditions where unit price is a key driver. Using the thickest feed spacer available, the DOW ...

By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Reverse Osmosis & Nanofiltration Product line

DOW FILMTEC - Model BW60-1812-75 - Reverse Osmosis (RO) Membranes for Home Drinking Water Treatment Units

New DOW FILMTEC reverse osmosis (RO) membranes for home drinking water treatment units are the most reliable and consistent elements in the industry. Advanced membrane technology and automated fabrication allow Dow to precisely produce each and every element to tight, pre-defined specifications. Dow’s advanced and consistent RO element ...

By Dow Water & Process Solutions based in Midland, MICHIGAN (USA). from Reverse Osmosis & Nanofiltration Product line

Nanofiltration System

Several pharmaceutical preparations and solutions are now concentrated with Nanofiltration. In several cases this process is sided to diafiltration and/or Ultrafiltration. MEMBRANE designs and manufactures, and commissions systems based on such technologies customized for the pharmaceutical industry. Our extended experience with organic and ...

By Membrane Srl based in Milano, ITALY. from Pharma Product line

Ceramic Nanofiltration

Characteristics: Ceramic membranes offer specific advantages in separation techniques: Chemical, mechanical and thermal stability, Ability of steam sterilization and back flushing, High abrasion resistance, High fluxes, High durability, Bacteria resistance, Possibility of regeneration, Dry storage after cleaning, Our worldwide unique ...

By inopor GmbH based in Hermsdorf, GERMANY.

Waterworks - Nanofiltration Systems

Waterworks nanofiltration system is a cross flow filtration technology that covers the filtration range between reverse osmosis and ultrafiltration. Waterworks supplies superior engineering, design and equipment for all nanofiltration systems and will work with clients to supplies products and services that meets with all their needs.

By Waterworks Technologies Inc. based in Calgary, ALBERTA (CANADA). from Water Systems Product line

ESNA - Nanofiltration Membranes

ESNA membranes by Hydranautics are designed using the latest technology and exhibit unparalleled performance at ultra-low pressures. Ideal for softening applications and removal of pesticides and pathogens, ESNA membranes provide 50-90% salt rejection. ESNA membranes also remove iron and TOC (Total Organic Carbon), while allowing passage ...

By Hydranautics A Nitto Denko Company based in Oceanside, CALIFORNIA (USA). from NF Product line

Subscribe to our eBulletins

Add Supplier Profile