Nitrous Oxide Monitoring Equipment In Canada
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400FL combines the benefits of hot wet extractive and in situ. The gas is moved at high speed in a bypass line. No filter or probe is used and the measurement takes place in a non-contact measurement ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The MEXA-1400QL-NX is an exhaust gas analyzer for four nitrogen compounds simultaneously,i.e. NO, NO2, N2O and NH3, utilizing mid-infrared Quantum Cascade Laser technology. By using the high power, high resolution lasers, the analyzer can measure each component accurately,even in low concentrations, with minimum interference from other components in engine exhaust gas. It is suitable for the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA ONE Series Introduces New N-Compounds Analyzer. High accurate nitrogen compounds measurement system using QCL-IR method newly employs 'HORIBA ONE PLATFORM'. This system provides the usability and expandability for your test laboratories, as well as other HORIBA ONE series ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
From environmental monitoring to developing new energy sources and chemicals for the new era, gas analysis systems are faced with needs and challenges that have changed dramatically over time. Responding to these new needs, HORIBA has developed the VA-3000, the versatile gas analyzer that's ready for the future. A single analyzer is now ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT6000 Mobilis — a complete emission monitoring system packed into a sturdy, portable device. Combining portability with high performance, the GT6000 Mobilis is a revolutionary emission monitoring system that can streamline measurement processes and save you a whole lot of time and effort, be it in a stack, a lab, or on the field. We ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single ...
-
PremiumManufactured by ENVEAbased in FRANCE
A complete “all in one compact” system, for multi-gas measurements, based on the field-proven MIR 9000 analyzer and on-board SEC sampling ...
-
Manufactured by TSI Incorporatedbased in USA
The 4082 Certifier® FA+ Low Flow Module can be used with the 4080 Certifier® FA+ System, in place of a 4081 Certifier® FA+ High Flow Module. Flow modules contain the calibrated sensors and communicate the measurements to the interface display module. A flow module (4082 Low Flow Module or 4081 High Flow Module) must be used in conjunction with the 4088 Certifier® FA+ Interface ...
-
Manufactured by QED Environmental Systemsbased in USA
The G210 is specifically designed for highly accurate measurement and verification of the quality of piped N2O and O2 medical gases in ...
-
Manufactured by DOD Technologies Incbased in USA
The GIR-3000 Explosion-Proof Gas Dectector provides continuous detection of CO2, CO, N2O and Hydrocarbon gases (LNG, LPG, CH4, C4H10) in explosion hazardous areas. Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces maintenance time and ...
-
Manufactured by QED Environmental Systemsbased in USA
The G200 N2O analyzer is designed to safety check background and breathing zone levels of N2O ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High specification analysis of flammable gas samples and trace contaminants in industrial gases applications including HyCO and Syngas mixtures. Designed specifically to meet the needs of the industrial gases industry, in particular the monitoring of hydrogen, HyCO and Syngas mixtures, the SERVOPRO 4200 delivers unparalleled sensing ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI's Series D12 Gas Transmitter line now includes a versatile infrared system that can be configured for LEL or select toxic gases. The D12-IR utilizes a compact IR sensor in a corrosion resistant housing with sintered flame arrestor to meet hazardous area classification requirements, and is suitable for most plant environments. ...
-
Manufactured by Bronkhorst High-Tech B.Vbased in NETHERLANDS
MASS-VIEW model MV-102 Direct Thermal Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 20…200 mln/min and 20…2000 mln/min at operating pressures up to 10 bar(g). The MFM has an integrated graphical OLED display, clearly visible at wide angles, which allows reading of actual flow (value and a bar graph), total flow and type of gas. The display ...
-
Manufactured by Gasera Ltdbased in FINLAND
Gasera one ghg greenouse gas analyzer offers reliable and simultaneous analysis of CH4 (Methane) and N2O (Nitrous Oxide) in ambient air. Many chemical compounds are present in Earth’s atmosphere and are capable of acting as greenhouse gases capable of absorbing and emitting infrared radiation emitted by Earth. Many of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you