Noise And Vibration Equipment In Massachusetts
-
ShowcaseManufactured by Proco Products, Inc.based in USA
Proco Style 233 expansion joints are built to withstand even the most rigorous piping system configurations. They are triple wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 233 expansion joints are appropriate for a wide ...
-
Manufactured by NEVA Associatesbased in USA
Designed as one fully customizable composite, DuPont LoWave can mitigate low, mid and high frequency acoustical energy. This highly developed acoustical material effectively reduces low frequency noise and vibration without altering machine design or existing infrastructure by using less mass, volume and weight than traditional solutions. ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
- typically as the base unit - to give you a complete self-contained GC gas solution, even where no house supply is available. Thanks to a unique duplex compressor mounting system, the Precision Air Compressor also benefits from low noise and vibration making it relatively quiet in operation within a typical ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Series 233L expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, triple-arch products which are specifically designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 234L rubber expansion joints are built to withstand even the most rigorous piping system configurations. They are low-profile, quadruple-wide arch products that are precisely designed to absorb directional movements of rigid pipe systems, as well as reduce noise and vibration, and compensate for misalignment due to long-term ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 232 rubber expansion joints are built to withstand even the most rigorous piping system configurations. They are double wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 232 expansion joints are appropriate for a wide ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The latest addition to the EZstrip™ family is a range of grinders offering a competitive solution to solids grinding and sludge conditioning. The EZstrip™ TR Munchers all house the quick release access port allowing the cutter assembly to be maintained in place without removing the equipment, reducing maintenance ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The AB-3G has been designed to operate to the exact requirements of several SCIEX LC-MS systems. A three gas system, the AB-3G provides nitrogen curtain gas, dry air source gas and dry air exhaust gas and benefits from robust integrated compressors, making it a complete standalone ...
-
Manufactured by NEVA Associatesbased in USA
facility for a no-cost noise/vibration evaluation. We will assist you in determining the most effective and economical method for reducing noise in the environment. The following list represents only a fraction of what we can offer to help quiet your industrial ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Combining the capacity of two separate Genius nitrogen generator systems into one fully integrated system in the same compact footprint, the Genius 3020 is a convenient and safe on-demand gas solution with dual output providing two independently controlled gas sources with the ability to supply two individual LC-MS ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Genius 3030 has been designed to supply curtain, source & exhaust gases for selected Sciex LC-MS instruments. This generator has two outlets for each of the three gases supplied, two of nitrogen and four of dry air, allowing two Sciex LC-MS instruments to be comfortably run using one Genius ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Designed to the specifications of the Bruker EVOQ Triple Quadrupole's gas requirements delivering dry air at up to 50L/min and nitrogen at up to ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Genius AB-3G has been designed to provide a continuous and reliable gas supply to meet the precise requirements of several SCIEX LC-MS instruments. A three gas system, the AB-3G provides nitrogen and dry air to supply curtain, source and exhaust gas; additionally the generator benefits from three integrated compressors with redundancy, making it a complete standalone solution for ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Genius 3031 has been engineered with an increased flow rate specifically for Sciex. This greater flow rate means this generator is ideal for supplying curtain (nitrogen), source (dry air) and exhaust (dry air) gas to the Sciex 6500 ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Engineered specifically for critical applications requiring maximum uptime, the NM-3G on-site nitrogen gas generation system is guaranteed to perform at all times. For such mission-critical applications, the NM-3G possesses a variety of extra precautionary features, including highly robust integrated compressors with additional load capacity, self-diagnostics and an alarm system to notify of any ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Designed as a dedicated solution for MP-AES instruments supplying high purity nitrogen for plasma support gas or monochromator purge and dry air supply for POP gas and monochromator air purge, Halo produces 25 L/min of 99.5% or 10 L/min of 99.95% pure nitrogen with a supporting dry air supply of up to 36.5 L/min. Fitted with an oxygen analyzer, Halo will alert when operating purity has been ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
Designed as an effective sewage grinder and to replace high speed macerators, the SB Muncher can save up to 85% of the energy requirements of a centrifugal force system. Typically it has a cutting tip speed 90% less than a high speed macerator system and also much lower vibration and noise ...
-
Manufactured by Eckel Industries Inc.based in USA
Eckel’s Portable Anechoic Chambers (PACs) are full anechoic chambers scaled to a size that makes them ideal for a range of uses including acoustic testing of small devices, calibration of microphones, free field response testing of loudspeakers and behavioral studies of small animals. These high performance chambers are available in a range of sizes with low frequency cut-offs of 150, 200, ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Genius 1061 is a dual gas generator providing both nitrogen and dry air designed to meet the specifications of the Shimadzu LC-MS 8050 for labs with an electrical supply up to 100V. This system contains two compressors allowing nitrogen and dry air flows to function independently of one another. The generator is configured to change the flow ratio of nitrogen and dry air, so long as the ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Genius 1051 PSA nitrogen generator has been developed to provide nitrogen gas and dry air to the Shimadzu LC-MS-8045, 8050 or 8060 to labs with electrical supply of up to 230V. We've built the Genius 1051 with two internal air compressors as standard, this removes the reliance upon an in-house air supply The configuration allows users to change the flow ratio of nitrogen and dry air, such ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you