non-destructive measurement equipment

The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. Single fiber optics allows the measuring point to be up ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

The NIRS XDS Process Analyzer – MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

The NIRS XDS Process Analyzer – MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

The NIRS XDS Process Analyzer – MicroBundle provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of practically any sample type (powders, slurries, liquids,..) are performed directly in the process line, granulator, dryer or reaction ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. Up to 9 probes and/or flow-cells can be connected to ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. All 4 channels can be configured independently from ...

By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

RDTD package offers thermal investigations for traffic infrastructure. RDTD includes the complete Road Doctor CamLink system and in addition a sophisticated thermal camera based data collection and analysis package.

By Roadscanners Oy based in Rovaniemi, FINLAND. from Road Clinic RDSV - Full RDSV System Product line

The Elcometer 7410 Concrete Moisture Meter is an accurate and easy to use non-invasive instrument for non-destructive measurement of moisture content of concrete. The electrodes transmit parallel low frequency signals, calibrated to give average moisture content by comparing the change in impedance between damp and acceptably dry concrete.

By Elcometer Limited based in Manchester, UNITED KINGDOM. from Moisture Product line

The IR3100 products uses proprietary model-based infrared reflectometry (MBIR) technology to deliver high-throughput, low COO, non-contact, non-destructive measurements of the thickness and uniformity of dielectric layers and etched structures used in integrated circuit manufacturing. The unique technology and analysis capability of the IR3100 ...

By SEMILAB Semiconductor Physics Laboratory Co., Ltd. based in Budapest, HUNGARY. from Dielectric Characterization Product line

The RT-1000 Resistivity Tester based on eddy current technique allows non-contact, non-destructive measurement of bulk resistivity of ingots and blocks as well as rapid classification of feedstock material including single and multicristalline pieces and pot-scrap. RT-1000P is a portable version of the resistivity tester that can be used with any ...

By SEMILAB Semiconductor Physics Laboratory Co., Ltd. based in Budapest, HUNGARY. from Off-line Single Point Product line

ACV systems provide 100% non-contact, non-destructive measurements of epi layer resistivity via patented technology.  The physics behind the measurement is quite similar to C-V Schottky or Hg-probe, and thus the output is a traditional C-V doping profile. The difference is that the electrode does not touch the wafer, resulting in substantial ...

By SEMILAB Semiconductor Physics Laboratory Co., Ltd. based in Budapest, HUNGARY. from EPI Resistivity Measurement Product line

The QC-2500e uses non-contact ac-Surface Photo Voltage technology to perform non-destructive measurements of near-surface resistivity, doping concentration and recombination lifetime on as-grown epitaxial wafers. Full hand-off automatization makes the system capable of supporting a high volume wafer manufacturing facility. Rapidity of even full ...

By SEMILAB Semiconductor Physics Laboratory Co., Ltd. based in Budapest, HUNGARY. from Epi Layer Monitoring Product line

A substrate that is too moist transfers the moisture to the installed wooden floor that then expands as the wood swells. The result is a warped floor. Building moisture measuring devices from merlin® enable fast, simple, accurate, and above all non-destructive measurement of the moisture content, for example in plaster, to prevent any ...

By Merlin Technology GmbH based in Tumeltsham, AUSTRIA. from Measuring Devices Product line

The FLIR MR60 Moisture Meter Pro is an easy-to-use pin and pinless moisture meter with advanced functionality. An integrated pinless sensor and an external pin probe provide the flexibility to take destructive or non-destructive measurements. Select one of the eleven material groups for pin moisture, or set a reference point for pinless moisture ...

By FLIR Systems Inc. based in Wilsonville, OREGON (USA).

Semilab SDI's patented SPV technique is the established world leader for non-contact, non-destructive measurements of heavy metal contamination in silicon. SPV gives extremely fast, reliable measurements of minority carrier diffusion length, at low injection level. Together with proprietary activation techniques, it allows for identification of Cu ...

By SEMILAB Semiconductor Physics Laboratory Co., Ltd. based in Budapest, HUNGARY. from Contamination Monitoring Product line

The Raman Spectrometer System is part of the MultiSpec family. The spectrometer system incorporates a 785-nm diode laser with a thermo-electrically cooled CCD spectrometer. The laser power can be tuned from 50-500 mW. The CCD is a highly sensitive, permanently wavelength calibrated detector that covers from 300 – 3100 cm-1. A fiber-optic ...

By tec5USA, Inc. based in Plainview, NEW YORK (USA). from Spectrometer Systems Product line

The Moisture Encounter Plus is an upgraded version of the Tramex Moisture Encounter. The instrument takes non-destructive moisture measurements of wood, drywall, block, brick, felt roofing and plaster using 3 ranges of sensitivity.

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Moisture Meters Product line

The Survey Encounter gives a digital non-destructive moisture measurement reading of wood, drywall, plaster, brick, roofing and siding. This instrument comes with software that can download the moistrue reading to a PC.

By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Moisture Meters Product line

The Roof Master Kit is the complete kit for the roofing professional, allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative ...

By Tramex Ltd. based in Kilmacanogue, IRELAND.

The Roof Inspection Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth, as well as non-destructive measurement of moisture conditions in concrete decks, wood decks and ambient relative humidity & dew-point conditions. Featuring the handheld ...

By Tramex Ltd. based in Kilmacanogue, IRELAND. from Roofing Inspection Product line