non-dispersive infrared gas equipment

CO analyzer adopts non-dispersive infrared spectrum and combines with advanced microprocessor technology. It provides accurate and reliable detection of CO at ppm level to meet the requirement of ambient gas monitoring.The principle is non-dispersive infrared based on gas filter correlation technology. CO molecule absorbs specific infrared light ...

By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA. from Ambient Quality Monitor System Product line

The SmartDGA Guide™ instrument provides comprehensive online DGA results that enable diagnostic techniques. The instrument uses Non-Dispersive Infrared (NDIR) technology to measure and record all nine industry recommended fault gases Acetylene (C2H2), Ethane (C2H6), Ethylene (C2H4), Carbon Dioxide (CO2), Carbon Monoxide (CO), Hydrogen (H2), ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - SmartDGA for Transformers Product line

The SmartDGA Gauge™ instrument is the industry’s first online dissolved gas analysis (DGA) monitor dedicated to Load Tap Changers (LTCs). The instrument uses Non-Dispersive Infrared (NDIR) technology to measure and record fault gases Methane (CH4), Acetylene (C2H2), Ethylene (C2H4) and moisture found in insulating (mineral) oil.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - SmartDGA for Transformers Product line

Advanced Energy’s Andros 6552 gas analyzer is available with two gas channels and can be applied to any type or combination of refrigeration systems that employ FreonsTM and carbon dioxide. Ability to measure up to five gases. Rapid warm-up. Highly accurate calibration. Simple and fast system integration. RS232 or USB communications.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - ANDROS OEM Gas Modules Product line

Single wave length non-dispersive infrared gas sensor. No pumping of the gas is necessary. Measuring range: 0-3000 ppm (CO2) 0-7000 ppm (by volume). Accuracy : ± 3% of range.

By Geonica SA based in Madrid, SPAIN. from CO2 Sensors (Meteo and Hydro) Product line

Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - ANDROS OEM Gas Modules Product line

The SmartDGA Guard™ instrument is a cost effective early warning monitoring solution for potential transformer failures. The instrument uses Non-Dispersive Infrared (NDIR) technology to measure and record fault gases Hydrogen (H2), Acetylene (C2H2), Carbon Dioxide (CO2), Carbon Monoxide (CO), and moisture found in insulating (mineral) oil. ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - SmartDGA for Transformers Product line

High speed, high precision, non-dispersive infrared gas analyzer for up to 20 Hz bandwith, Based on the proven LI-7500A (see below), Measurement range of 0 - 3'000 ppm CO2 and 0 - 60 ppt H2O, High precision of 0.16 ppm CO2 and 0.0067 ppt H2O typical RMS noise in ambient conditions @ 20 Hz, High speed in-cell temperature and pressure measurements, ...

By DMP Ltd. based in Fehraltorf, SWITZERLAND. from Eddy Covariance Product line

The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor-transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - RS-485 Gas Detection Networks Product line

Absolute, non-dispersive infrared gas analyzer, Wide measurement range of 0 - 20'000 ppm CO2 and 0 - 60 ppt H2O, Less than 1 ppm @ 370 ppm for CO2 and less than 0.01 ppt at 10 ppt for H2O noise with 1 second signal averaging, On board sensors measure and correct for changes in cell temperature and pressure

By DMP Ltd. based in Fehraltorf, SWITZERLAND. from Gas Analyzer Product line

This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (PPM) range and is ideal for applications ranging from conference rooms to cafeterias.

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Detection - Stand Alone Detectors Product line

Advanced Energy’s Andros 6511 gas analyzer offers unparalleled accuracy and performance. It’s designed to meet and exceed performance requirements for portable or fixed leak detectors of toxics or combustibles. Superior performance and reliability. Enhanced optics and electronics. Highly accurate calibration. Extensive software ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - ANDROS OEM Gas Modules Product line

Specifically designed for continuous monitoring of CO2 and H2O over a wide range of environmental conditions, the LI-840A CO2/H2O Analyzer is an absolute, non-dispersive, infrared (NDIR) gas analyzer based on a single, interchangeable optical path, and a dual wavelength infrared detection system.

By LI-COR based in Lincoln, NEBRASKA (USA).

Cost-effective fermentation monitoring system for laboratory, pilot, and light industrial applications. Rugged, reliable, and field-proven product platform. Based upon the Non-Dispersive InfraRed (NDIR) technique, the Innova 1316-3 is ideally suited for pilot plants or small batch fermentation processes. Measuring CO2, Ethanol, and O2 ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - INNOVA Gas Monitoring- Non-Dispersive IR (NDIR) Spectroscopy - Multi-Gas Monitor - 1316 Product line

The VIG Industries, Inc. Model 300/2 is designed to measure a two gasses (or three with oxygen option). The Model 300/2 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving ...

By VIG Industries based in Anaheim, CALIFORNIA (USA). from (NDIR) Non-Dispersive Infrared Analyzers Product line

The LI-820 CO2 Analyzer is a low cost, low maintenance CO2 analyzer designed for continuous monitoring applications. It is an absolute, non-dispersive infrared (NDIR) gas analyzer based upon a single path, dual wavelength, infrared detection system. It can be used in a wide range of environmental conditions.

By LI-COR based in Lincoln, NEBRASKA (USA).

Cost-effective, customizable multi-gas monitoring system for a wide variety applications. Rugged, reliable, and field-proven product platform. Based upon the Non-Dispersive InfraRed (NDIR) technique, the INNOVA 1316-1 is a cost-effective gas monitor suitable for a variety of applications. The 1316-1 can measure up to five gases, including Oxygen, ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - INNOVA Gas Monitoring- Non-Dispersive IR (NDIR) Spectroscopy - Multi-Gas Monitor - 1316 Product line

The Model 2166 is a non dispersive infrared gas monitor designed as a fully functioning stand-alone unit for the continuous monitoring of carbon dioxide. The optical system is not effected by humidity. The pumped gas sampling circuit has a self-draining water trap. This eliminates difficulties with water condensation in the sample lines. It has a ...

By VTI-Valtronics, Inc. based in Valley Springs, CALIFORNIA (USA). from Health & Safety Product line

Cost-effective, customizable Refrigerant Leak Prevention System for a wide variety applications Rugged, reliable, and field-proven product platform. Based upon the Non-Dispersive InfraRed (NDIR) technique, the INNOVA 1316-2 is a cost-effective gas monitor suitable for measuring refrigerant leaks. The 1316-2 can measure up to five gases and can be ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Gas Sensing - INNOVA Gas Monitoring- Non-Dispersive IR (NDIR) Spectroscopy - Multi-Gas Monitor - 1316 Product line

The LI-820 CO2 Analyzer is a low maintenance, economical gas analyzer designed for continuous monitoring applications. It is an absolute, non-dispersive infrared (NDIR) gas analyzer based upon a single path, dual wavelength infrared detection system. It can be used in a wide range of demanding environmental conditions.  

By DMP Ltd. based in Fehraltorf, SWITZERLAND. from Gas Analyzer Product line