non-ferrous metal equipment in Washington

  • Viking Chains - Model VC78NM - Non Metallic Drive Chain

    Glass Filled Nylon Material. 2,609' Pitch. 304SS Pin and Roll Pin. Maximum Working Load 1,800 lbs. 5,000 lbs Average Ultimate Strength

    By Viking Chains Enviro Group Office in Vancouver, WASHINGTON (USA). from Non Metallic Drive Chain Product line

  • Viking Chains - Model VC720NM - Non Metallic Collector Chain

    Glass Filled Nylon Material. 6.00' Pitch. Maximum Working Load 3,100 lbs. 7,000 lbs Average Ultimate Strength

    By Viking Chains Enviro Group Office in Vancouver, WASHINGTON (USA). from Non Metallic Collector Chain Product line

  • Ionyx - T2 for Metal & Concrete

    Corrosion control takes a technological leap forward with T2 for Metal & Concrete's unparalleled resistance to moisture, corrosion, rust, salt spray, acid rain, UV damage, oxidation, chlorides, galvanic corrosion, wind drag, dirt buildup, and ice buildup. No-flake, no-peel consistent coverage and protection that outlasts and outperforms with T2 ...

    By WirxGroup based in Winlock, WASHINGTON (USA).

  • Eddy Current Separator

    Our eddy current separator is designed to increase aluminum recovery in MRF’s. The separator yields the best separation of nonferrous metal from non-metallic contamination. As aluminum cans or other non-ferrous metals pass over the drum, the alternating magnetic field creates eddy currents that repel the material away from the conveyor. ...

    By Krause Manufacturing Inc (KMI) based in Bellingham, WASHINGTON (USA). from Eddy Current Separator Product line

  • Dolphin - Model G3 - Non-Invasive Solution for Inner Diameter Inspection System

    AcousticEye’s non-invasive solution for inner diameter inspection of today’s hard-to-inspect tubes up to 4' enables ultra-fast, accurate inspection of boilers, Fin Fans and other heat exchangers regardless of tube shape or material.Featuring patented Acoustic Pulse Reflectometry (APR) technology, Dolphin G3 is an advanced, yet ...

    By AcousticEye Office in Woodinville, WASHINGTON (USA).

  • Burning & Welding Equipment

    From just under the surface to 1,000 feet deep, Global has the tools, equipment and know how to handle all of your burning / welding needs. We have American Welding Society (AWS)-certified welders for both topside and underwater welding, and we can address both ferrous and non-ferrous metals.

    By Global Diving & Salvage, Inc. based in Seattle, WASHINGTON (USA). from Burning & Welding Equipment Product line

  • Pipes Hoses and Fittings

    The pipes are lay-flat and rigid. The hoses are metallic and non-metallics. The fittings are: Quick Disconnect, Cam and Groove, Industrial Groove, Flanges, Restrained Joint and PVC.

    By BakerCorp Office in Everett, WASHINGTON (USA). from Pipes Hoses and Fittings Product line

  • Overbelt Magnet

    The Over-Belt Electro Magnetic Separator allows for efficient separation and recovery of ferrous metal material. The magnet is placed over the stainless steel section in your conveyor and ferrous material is attracted to the electro-magnet force above which adheres to the conveyor belt allowing for transfer of the ferrous material to silo or ...

    By Krause Manufacturing Inc (KMI) based in Bellingham, WASHINGTON (USA). from Overbelt Magnet Product line

  • Ionyx - Eco-friendly Erase UltraClean 6710 Cleaner/Degreaser

    Moderate foamingNon-caustic formulaNPE and Glycol Ether freeExcellent rinsing propertiesSolvent-free, VOC freeERASE 6710 is a highly alkaline water-based concentrated cleaner intended for heavy duty general cleaning and degreasing applications. This product is suitable for use on most ferrous metals and hard surfaces such as tile, glass, and ...

    By WirxGroup based in Winlock, WASHINGTON (USA).

  • Prototek - Model FM Series 512 Hz - Miniature Transmitter

    These miniature transmitters go almost anywhere. They are ideal for locating in small cast iron and non-metallic lines and P-traps.

    By Prototek Corporation based in Poulsbo, WASHINGTON (USA). from Miniature Transmitter Product line

  • TG Ferrous Baler

    The TG ferrous metal baler is a standout for heavy-duty, high-production, reliable baling systems. The TG baler utilizes a three compression baling system to produce numerous bale sizes to meet market requirements.

    By Harris Waste Management Group, Inc Distributor in WASHINGTON (USA). from TG Ferrous Baler Product line

  • EnviroGuard - Condor Spill Containment System

    The Condor System, used in wet-cell battery applications, is a non liner-based spill containment system that complies with NFPA, International Fire Code (IFC), and OSHA. It has metal barrier walls with an acid-resistant, safety yellow coating. Flanges may be in or out to save floor space.

    By EnviroGuard Office in Seattle, WASHINGTON (USA). from Condor Spill Containment System Product line

  • Viking Chains - Model VCSS701 - Stainless Steel Collector Chain

    Stainless Steel Collector Chain for use in applications that have utilized non-metallic chain. It is designed to run on standard 720S style sprockets - perfect if sprockets are not in need of change out. This lightweight but high strength chain will withstand highly corrosive environments. It is compatible with other chain manufacturer's ...

    By Viking Chains Enviro Group Office in Vancouver, WASHINGTON (USA). from Stainless Steel Collector Chain Product line

  • Ionyx - Eco-friendly Erase 410 HD Cleaner/Degreaser

    Moderate foamingNon-caustic formulaNPE and Glycol Ether freeExcellent rinsing propertiesERASE 410 HD is a concentrated water-based alkaline general purpose cleaner/degreaser specially formulated to remove a broad range of contaminants (oils, greases, and grime) from most washable surfaces. Product offers superior cleaning and degreasing without ...

    By WirxGroup based in Winlock, WASHINGTON (USA).

  • Sterlitech Stirred Cells

    Our stirred cells have a tangential flow design to increase membrane and sample life.Stirred Cell Product Benefits: All contact surfaces are non-metal (polycarbonate or acrylic barrel, polyacetal end caps) Clear plastic reservoir allows for visual monitoring of fluid level and sample condition Pressure relief valve supplied (65 psi)

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Sterlitech Stirred Cells Product line

  • Ionyx - HoldFast Marine Coat

    Non-Toxic Surface is Pesticide, Copper & Heavy Metal FreePrevents Seepage Into ConcreteEnsures optimum resilience and longevity for metal, fiberglass, concrete marine structures, concrete ponds, dams, fisheries, waterworks, treatment plants & more. Reduces the firm attachment of organisms and reduces cleaning maintenance. Prevents liquid seepage ...

    By WirxGroup based in Winlock, WASHINGTON (USA).

  • Viking Chains - Model 78 Series - Dished Offset Driven Sprocket

    Viking Chains non metallic dished offset driven sprockets (78 series) feature our durable polyurethane dished hub with replaceable bolt on UHMW sprocket rim (teeth). Other sprocket materials available: Nylon, Cast Iron Chilled Rim, Cast Iron c/w replaceable bolt on UHMW sprocket rim.

    By Viking Chains Enviro Group Office in Vancouver, WASHINGTON (USA). from Dished Offset Driven Sprocket Product line

  • TGS Baler Ferrous Baler

    The TGS ferrous metal baler is a terrific heavy-duty, high-production, and reliable baling system. The TGS baler utilizes a three compression baling system to produce numerous bale sizes to meet market requirements.

    By Harris Waste Management Group, Inc Distributor in WASHINGTON (USA). from TGS Baler Ferrous Baler Product line

  • Prototek - Model LF2000 - 512 Hz - Digital Receiver

    Powerful, easy-to-use and dead-on accurate. Did we mention economical too?. The LF2000 gives you all the information you need, without confusing distractions, through the toughest cast iron or non-metallic locating jobs. Works great with Prototek’s line of 512 Hz transmitters, as well as video cameras and any other 512 Hz equipment. The ...

    By Prototek Corporation based in Poulsbo, WASHINGTON (USA). from Digital Receiver Product line

  • Ardy - Model AR-1 - Analog Receiver - 223 KHz

    The Ardy analog receiver has proven to be the most economical and easiest to use for simple underground non-metallic line and septic tank locates. Team the AR-1 with the ATP-12 flushable transmitter for dependable septic tank locating.  The signal from the ATP-12 is very distinct and won’t be confused with any source of ...

    By Prototek Corporation based in Poulsbo, WASHINGTON (USA). from Analog Receiver - 223 KHz Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you