Showing results for: Non-Ferrous Metal Equipment Near Massachusetts
-
Manufactured by Evident Scientific (formerly Olympus Scientific Solutions)based in USA
The X-STREAM and X-STREAM: Glass are high-speed, automated sorting systems for automatic identification and sorting of material by chemical composition. Take metal, glass and mineral recycling to a new level of high speed, accuracy and ...
-
Manufactured by H.C. Starck Ceramics GmbHbased in GERMANY
H.C. Starck produces Nozzles and Slide Valves for regulation, control and dosing of molten aluminum. These parts can be made from our high tech ceramics StarCeram AT or StarCeram N. Both materials are characterised by an excellent thermal shock and corrosion resistance as well as a very low wettability by non ferrous metal melts. ...
-
Manufactured by Monitor Technologies, LLCbased in USA
The DustAlarm ES is ideal to use as a broken bag dust monitor and filter leak detector. Via Triboelectric technology with algorithms, DustAlarm ES provides reliable and economical detection of leaks and filter failures in the exhaust ducts of baghouses of various sizes, cartridge collectors, cyclones, and any other dust collector for most powder and bulk solids ...
-
Manufactured by Monitor Technologies, LLCbased in USA
The DustTrend ES provides continuous trend measurements that allow plant operators to identify changes in dust emission levels and optimize the facility's filtration systems. ...
-
Manufactured by RpProto Co., Ltdbased in CHINA
It is the most widely used non-ferrous metal structural material in the industry. Aluminum has advantages of high tensile strength, excellent plasticity, and light weight. Electrical conductivity, thermal conductivity, and corrosion resistance are all excellent. Heat treatment can be used to improve the mechanical, physical, and ...
-
Manufactured by Skyray Instrument Inc.based in USA
Atomic Absorption Spectroscopy is a spectroanalytical procedure for the quantitative determination of chemical elements. AAS technique is widely applied for determining the concentration of a elements in Chemistry and other fields such as metallurgy, environmental, petrochemical, industrial and pharmaceutical. Skyray Instruments Atomic Absorption Spectrometers feature low limits of detection with ...
-
Manufactured by Skyray Instrument Inc.based in USA
size, OES 6000 is a convenient instrument for the analysis of ferrous and non¬ferrous ...
-
Manufactured by Skyray Instrument Inc.based in USA
ICP-2060P Inductive Coupled PLasma Spectrometer is widely used in scientific research institutes, universities and other industry enterprises related to the fields such as geology, metallurgy, rare earth materials, electro-plating, cemenet, petroleum, chemical engineering environmental detection, non-ferrous metals, medical science ...
-
Manufactured by Skyray Instrument Inc.based in USA
engineering environmental detection, non-ferrous metals, medical science food and ...
-
Manufactured by Angstrom Advanced Inc.based in USA
The model 752S is a simple single beam spectrophotometer extending into the UV region. The wavelength is set manually from the dial on the front panel. Direct readout of Transmission or Absorption on LED display. The 752S incorporated a high-brightness Hamamatsu deuterium lamp for UV and a tungsten lamp for the visible wavelengths.Measured values can be transferred to a PC via the RS232 link for ...
-
Manufactured by Leopold - a Xylem Brandbased in USA
system. The simple, but rigid construction of the Clari-Vac floating sludge collector allows for trouble-free maintenance during tank drain-down. There are no moving parts under water and all parts except the drive are nonferrous metals to minimize corrosion ...
-
based in USA
techniques. So what do those terms mean exactly? Traditionally, electrowinning is the process of passing a controlled current through an anode in an aqueous solution of dissolved metal ions. This current causes specific ions to plate onto the cathode depending on the tuned current – this part of the process is called electroplating. During this ...
-
based in USA
Our flagship product is a category-breaking mixed hydroxide precipitate (MHP) of nickel and cobalt. Our electro-extraction MHP is greater than 98% NiCo content, while traditional MHP from laterite ore is 75% NiCo. Higher purities allow our customers to recover more critical minerals from their supplied feedstocks and lower costs through reduced transportation and refining needs. MHP created ...
-
Manufactured by Continental Biomass Industries, Inc. (CBI)based in USA
Cost-effective and suitable for removing “heavies” such as rocks, bricks, metals, glass, ice lumps, nuts & bolts, etc., from less dense materials. The DENSE-OUT Vibratory AIR Separator integrates the advantages of vibratory technology and controlled air. Air density separation is a key system component for the separation of ...
-
Manufactured by J W Fishers Manufacturing Inc.based in USA
A metal detector with high noise immunity that can be remotely operated. The RMD-1 is a high performance Pulse induction metal detector which can be attached to almost any ROV or towed underwater system as shown in the photo. Pulse induction technology allows the RMD-1 to detect both ferrous and non-ferrous ...
-
Manufactured by J W Fishers Manufacturing Inc.based in USA
JW Fishers SAR-1 was specifically designed for military, law enforcement and public safety dive teams to locate metallic objects in low visibility environments. The "snareless" SAR-1 has a streamlined design with no external wires or cables which makes this detector the ideal tool for work in environments with potential entanglement ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The MagScan 100 detects the magnetic field of a ferromagnetic object. It responds to the difference in magnetic fields. This provides a stronger signal at the edge of the pipe, valve or cover enabling the operator to mark the shape of the object located. When tracing a ferrous pipe, the covered valve can be located as an increase in ...
-
Manufactured by swissRTec AGbased in SWITZERLAND
system on the cutting edge. For even higher yields and additional profits, the non-ferrous metal concentrate can be further processed and purified with the SRT 2 - Delamination and Separation ...
-
Manufactured by Walter Surface Technologiesbased in USA
The new Enduro-Flex 2-in-1 TURBO removes material faster and gets you the finish you want in less steps. Designed for steel, stainless steel and aluminum, the Enduro-Flex 2-in-1 TURBO provides unmatched versatility. Incorporating Walter’s Cyclone and high-tech Blendex technologies, to leave a smooth finish and provide high product life. Available in both 4.5” and ...
-
Manufactured by ARCOR Epoxy Technologiesbased in USA
ARCOR™ EE-10 is a solvent free, high functionality epoxy Novolac coating suitable for immersion and non-immersion service, particularly in aggressive acid environments. ARCOR™ EE-10 produces a tough, chemical resistant coating on ferrous and non-ferrous metals and concrete. As the lowest viscosity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you