Only show results in Virginia? Ok

non-ferrous metal industry equipment

  • Premium

    Mac - Model 5200 - Industrial Metal Baler

    The Workhorse: Developed for high density baling of both ferrous and non-ferrous metal, MAC’s Model 5200 excels in a broad range of materials including loose steel sheet, clips and trim stock. A real workhorse, the Model 5200 baler is capable of producing bales measuring 16-inches square by variable lengths at a rate of 55 - 60 per hour. ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Metal Baler Product line

  • Premium

    Non-Ferrous Metal Scrap Processing

    Non-Ferrous Processing and Separation Application. Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Non-Ferrous Metal Scrap Processing Product line

  • Premium

    Enerpat - Model GWS2525 - Non-Metal Shredder

    GWS2525 Non-Metal Shredder plays good in scrap cardboard and waste paper recycling industry,we produced the GWS-Series for more than 10 years,get good reputation from more than 500 customers.the GWS-series general waste shredder comes the Boneng brand gear box,siemens motor.which can shred the cardboard into 10mm strips.while the shredder comes ...

    By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM. from Non-Metal Shredder Product line

  • Premium

    Polychem - Non-Metallic Telescoping Head Shaft

    The Polychem non-metallic telescoping head shaft was invented and installed as part of the first 100% non-metallic system in 1984. At that time, the industry was just beginning to test plastic as a lighter, corrosion-resistant alternative to steel. Today, Polychem non-metallic head shafts have become the water treatment industry’s gold ...

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Non-Metallic Telescoping Head Shaft Product line

  • Premium

    Mastertrax - Model ECS150 - Mobile Eddy Current Metal Sorter

    The ‘Mastertrax’ ECS150 Metal Sorter perfectly combines high performance and durability to produce the industry’s leading mobile Eddy Current Separator. The ‘Mastertrax’ incorporates a 1500mm wide High-Intensity Concentric ECS along with a Rare Earth Drum Magnet, providing separation of ferrous and non-ferrous ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Danieli - Model DCR - Shredding Plant

    Through a continuous process of product development, Danieli Lynxs scrap shredder plants combine technical ingenuity with engineering excellence. A complete service is available to the scrap shredder operator, from full turnkey design, manufacture and installation of new integrated facilities to the supply of replacement rotors and wear parts. At ...

    By Danieli Centro Recycling based in CHAMBERY, FRANCE. from Shredding Plant Product line

  • Premium

    Enerpat - Automatic Aluminum Extrusion Baler

    The PLC mode three ram compacting scrap aluminum extrusion balers prefect for compacting scrap aluminum, scrap metals, steel shavings into the best size 19.6'*19.6' mm. the baler comes with SIEMENS motor, SIEMENS electrical and SIEMENS PLC. which makes the baler works stable , non stopping for 24 hours. SMB series Scrap Metal Balers also named ...

    By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM.

  • Reukema - Non Ferrous Metals

    Aluminium is a very frequently used type of metal. It can be used for a wide variety of applications. It is attractive and lightweight,  and used for car production and in the construction industry. Examples of aluminium products or products that include aluminium are cars, window frames, road signs, pots, pans, packaging etc. There are three ...

    By Reukema Recycling - Reukema Groep B.V. based in Harderwijk, NETHERLANDS. from Non Ferrous Metals Product line

  • Premium

    LumaSense IMPAC - Model IN 3000 - Portable Digital Pyrometer

    The IN 3000 is a good value stationary infrared sensor for non-contact temperature measurement of non-metallic surfaces or painted, coated or anodized metals. The sensor has a fixed emissivity setting of 95% and optical data with a distance ratio (measuring distance / spot size) of 5 : 1. These data in combination with a short response time of 300 ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Portable Digital Pyrometer Product line

  • 550 - Non-Metallic Anti-Seize Compound

    550's homogeneous composition offers maximum protection against seizure and heat freeze, eases assembling and dismantling, and saves man hours. It assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning. It contains carefully balanced proportions of molybdenum disulfide ...

    By Jet-Lube Inc. based in Houston, TEXAS (USA). from Non-Metallic Anti-Seize Compound Product line

  • PRAB - Metal Turnings Shredders

    PRAB's horizontal, two-roll industrial metal shredders are efficient solutions for breaking up bushy wads of ferrous and non-ferrous metals.

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Metal Turnings Shredders Product line

  • Premium

    LumaSense IMPAC - Model IN 300 - Small, Stationary Infrared Thermometers

    Small, stationary infrared thermometers in 2-wire technique for non-contact temperature measurement of non-metallic surfaces between -20°C and 600 °C. The IN 300 is a stationary pyrometer for non-contact temperature measurement of nonmetallic surfaces or painted, coated or anodized metals. The very small housing dimensions enable the ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Small, Stationary Infrared Thermometers Product line

  • Eddy - Current Non-Ferrous Separators

    In a world of depleting natural resources the race is on to find faster, cheaper, more efficient ways of reclaiming and recovering raw materials, as well as improving the purity and reducing the risk of contamination during their processing. One of the more recent and exciting innovations in material separation is the non-ferrous Eddy Current ...

    By Global Equipment Mktg. Inc. (GEM) based in Boca Raton, FLORIDA (USA). from Current Non-Ferrous Separators Product line

  • Wanshida - Model Y83-250 - Scrap metal balers

    1. Product Name: Hydraulic Metal Baler(Y83-250) 2. Application: Y83-250A hydraulic metal baler is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper & aluminum, waste stainless steel, scrap from discarded automobiles) into acceptable ...

    By Jiangsu Wanshida Hydraulic Machinery Company based in Jiangyin, CHINA. from Scrap metal balers Product line

  • Wanshida - Model Y83Q-4000C - Scrap Metal Shear Baler

    Metal Baler Shear(Y83Q-4000C): 1) Cutting force: 4000kN 2) Compress room:5000*1350*680mm 3) Bale size:460*460mm 1. Product Name: Metal Baler Shear(Y83Q-4000C) 2. Application: Y83Q-4000C Metal Baler with Shear is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, ...

    By Jiangsu Wanshida Hydraulic Machinery Company based in Jiangyin, CHINA. from Scrap Metal Shear Baler Product line

  • Recycling and Recovering Precious & Specialty Metals

    Umicore Precious Metals Refining operates the world's most sophisticated precious metals recycling facility. We recover 20 precious and non-ferrous metals from industrial residues, used electronic scrap, automotive and industrial catalysts and fuel cells.

    By Umicore Group based in Brussels, BELGIUM. from Recycling and Recovering Precious & Specialty Metals Product line

  • Ravne - Saw Blades for Metal Industry

    HSS Saws: general use conventional cut-off blade for ferrous and non ferrous metals, also suitable for specific plastics. Hot Saw Blades are used to cut metals with a temperature in excess of 850˚C. Friction Saw Blades are used to saw metals with a temperature below 250˚C.

    By SIJ - Slovenian Steel Group, d. d. based in Ljubljana, SLOVENIA. from Saw Blades for Metal Industry Product line

  • Premium

    Mastermag - Permanent Overband Magnets

    The Mastermag overband separators are renowned around the world as the most effective units for the continuous removal of tramp ferrous material from a product stream. This type of magnetic separator is used to protect, clean and separate materials on applications in the recycling and quarrying industries, allowing for metal recovery. Most ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Model Series P - Non-Metallic Pumps

    Non-metallic pumps are used in galvanic, coating, paint, varnish, pharmaceutical, chemical, waste water and building industries, and are made of mechanically manufactured or uniquely designed injection-molded plastic parts. Non-metallic pumps were designed for problem-free pumping of corrosive and abrasive products in such applications.

    By Granzow, Inc. based in Charlotte, NORTH CAROLINA (USA). from Non-Metallic Pumps Product line

  • PRAB - Manual and Automatic Solid Bowl Centrifuges

    Our line of Solid Bowl Centrifuges effectively separates solids from liquids in metal processing applications where removal of fines is important to recycle and reuse goals. PRAB Solid Bowl Centrifuges provide high performance liquid/solid separation for all types of particles; metallic, ferrous, non-ferrous, and non-metallic solids. Our ...

    By PRAB, Inc based in Kalamazoo, MICHIGAN (USA). from Manual and Automatic Solid Bowl Centrifuges Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you