Only show results available in Connecticut? Ok

nonwoven polypropylene geotextile equipment

  • Petromat - Model 4597 - Nonwoven Polypropylene Geotextiles

    PETROMAT 4597 is a nonwoven polypropylene geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. PETROMAT 4597 is used as a moisture barrier and stress absorbing interlayer beneath asphalt overlay or a chip seal and exceeds AASHTO M288 requirements for ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Paving Products Product line

  • Petromat - Model 4598 - Nonwoven Polypropylene Geotextiles

    PETROMAT 4598 is a nonwoven polypropylene geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. PETROMAT 4598 is used as a moisture barrier and stress absorbing interlayer beneath asphalt overlay or a chip seal and exceeds AASHTO M288 requirements for ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Paving Products Product line

  • Petromat - Model 4599 - Nonwoven Polypropylene Geotextiles

    PETROMAT 4599 is a nonwoven polypropylene geotextile produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. PETROMAT 4599 is used as a moisture barrier and stress absorbing interlayer beneath asphalt overlay or a chip seal and exceeds AASHTO M288 requirements for ...

    By Propex Operating Company, LLC based in Chattanooga, TENNESSEE (USA). from Paving Products Product line

  • Protexia - Model RK4 - Needlepunched Nonwoven Polypropylene Geotextile

    Protexia RK4 is a bi-orientated polypropylene geogrid heat laminated to a robust needlepunched nonwoven polypropylene geotextile (GEOfabrics RK1) that has been manufactured from virgin high tenacity fibre engineered to provide high puncture resistance and extension at break. RK4 is typically employed at the base of rail ballast to whereby the ...

    By GEOfabrics Limited based in Stourton, UNITED KINGDOM. from Geocomposites Product line

  • Root Barrier

    A UV stabilised, polypropylene needlepunched nonwoven geotextile, coated with PP on both sides or not, for root barrier applications.

  • Bentomat - Model DN-HS - Geosynthetic Clay Liner

    BENTOMAT DN-HS is a reinforced GCL consisting of a layer of sodium bentonite between two polypropylene nonwoven geotextiles that are needle-punched together. This double nonwoven GCL provides higher strength as compared to ordinary double nonwoven GCLs while maintaining the advantage of higher interface friction performance.

    By CETCO based in Kings Norton, UNITED KINGDOM. from Environmental Products - GCL - Bentomat Product line

  • WINFAB - Model 600NE - Polypropylene Fibers

    WINFAB 600NE is a needlepunched nonwoven geotextile composed of polypropylene fibers that are formed into a dimensionally stable network, which allows the fibers to maintain their relative position. WINFAB 600NE resists ultraviolet deterioration, rotting and biological degradation and is inert to commonly encountered soil chemicals.

    By Willacoochee Industrial Fabrics, Inc. based in Willacoochee, GEORGIA (US) (USA). from Nonwoven - Environmental Product line

  • Model US 80NW - Nonwoven Geotextile

    NTPEP APPROVED - GTX-2013-01-020. US 80NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. US 80NW resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 80NW meets the following M.A.R.V. values except where ...

    By US Fabrics Inc based in Cincinnati, OHIO (USA). from Geotextiles Product line

  • Model US 100NW - Nonwoven Geotextiles

    NTPEP APPROVED - GTX-2013-01-026. US 100NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. US 100NW resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 100NW meets the following M.A.R.V. values except where ...

    By US Fabrics Inc based in Cincinnati, OHIO (USA). from Geotextiles Product line

  • Earthmate Asphaltrac - Model GFC - Composited Asphalt Reinforcing Grids

    Earthmate Asphaltrac GFC Composited Grids are knitted E-Glass Fiber on the polypropylene ultra-lightweight Nonwoven Geotextile. It is coated with modified bitumen to achieve perfect bonding between the Bi-axial reinforcement and the asphalt layer. The load concentration is reduced effectively and the reflective cracking will be retarded evidently. ...

    By Nanjing Earthmate New Materials Co., Ltd based in Nanjing, CHINA. from Asphaltrac Product line

  • Model US 120NW - Nonwoven Geotextile

    NTPEP APPROVED - GTX-2013-01-027. US 120NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. US 120NW resists ultraviolet and biological deterioration, rotting, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. US 120NW will satisfy the requirements as outlined ...

    By US Fabrics Inc based in Cincinnati, OHIO (USA). from Geotextiles Product line

  • Model US 135NW - Nonwoven Geotextile

    NTPEP APPROVED - GTX-2013-01-032. US 135NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. Primarily used in drainage applications, this product prevents soil fines from entering the system extending drain life and performance and can also be used in lightweight separation applications. US 135NW meets ...

    By US Fabrics Inc based in Cincinnati, OHIO (USA). from Geotextiles Product line

  • AgruTex - Non Woven Geotextile

    A 100% polypropylene (PP) nonwoven geotextile, AgruTex lowers initial project costs as it reduces the amount of base material needed. The staple fiber needle-punch geotextile is ideal for environmental and civil engineering applications including cushioning, separation, stabilization, and filtration. AgruTex extends the life of a project by ...

    By Agru America, Inc. based in Georgetown, SOUTH CAROLINA (USA). from Geotextiles Product line

  • Geodren - Model PPEXT - Polypropylene Nonwoven Geotextile

    GeodrenPPEXT is a white polypropylene nonwoven geotextile and is designed to perform following functions: filtration, separation, protection. By using Geodren PPEXT, satisfactory performances and money saving can be easily reached. Geodren PPEXT is available in many sizes (width from 1 to 6 m) and weights (from 100 to 1500 g/m²) according to ...

    By Edilfloor S.p.A. based in Sandrigo (VI), ITALY. from Geosynthetics - Nonwoven Geotextiles Product line

  • L & M - Non Woven Geotextiles Fabrics

    Non woven Geotextiles Fabrics are probably the most commonly known geotextiles. Nonwoven polypropylene fabric, which has a felt-like consistency, combines strength and flow ability. Available in varying weights and thicknesses, the fabrics are strong but permeable, allowing for varied uses. Nonwoven fabrics commonly are used as a separator between ...

    By L & M Supply Company based in Willacoochee, GEORGIA (US) (USA). from Geotextiles Product line

  • L & M - Model LM 1200 NT - Needle Punched Non Woven Geotextile Fabrics

    LM 1200 NT is a nonwoven geotextile fabric manufactured from Polypropylene Staple Fiber. The fibers are randomly oriented and form a cohesive / stabilized needle punched fabric, for use in many applications. LM 1200 NT resists ultra violet deterioration, rotting, and biological degradation and is inert to commonly encountered soil chemicals.

    By L & M Supply Company based in Willacoochee, GEORGIA (US) (USA). from NTPEP Certified Non-Woven Geotextile Fabrics Product line

  • Nonwoven Geotextiles - NW Standard

    A UV stabilized, needle punched, nonwoven geotextile produced from 100% polypropylene staple fibers. Used in many civil engineering and building applications. Designed to offer filtration, separation and erosion control functions.

    By Thrace Plastics Pack S.A. based in Alimos, GREECE. from Technical Fabrics - Geosynthetics Product line

  • Earthmate Asphaltrac - Model HDC - Composited Asphalt Reinforcing Grids

    Earthmate Asphaltrac HDC Composited Grids are knitted high-modulus Polyester Yarn on the polypropylene ultra-light weight Nonwoven Geotextile. It is coated with modified bitumen to achieve perfect bonding between the Bi-axial reinforcement and the asphalt layer. The load concentration is reduced effectively and the reflective cracking will be ...

    By EMG Geosynthetics based in Nanjing, CHINA. from Asphaltrac Product line

  • Earthmate Asphaltrac - Model GFC - Composited Asphalt Reinforcing Grids

    Earthmate Asphaltrac GFC Composited Grids are knitted E-Glass Fiber on the polypropylene ultra-light weight Nonwoven Geotextile. It is coated with modified bitumen to achieve perfect bonding between the Bi-axial reinforcement and the asphalt layer. The load concentration is reduced effectively and the reflective cracking will be retarded ...

    By EMG Geosynthetics based in Nanjing, CHINA. from Asphaltrac Product line

  • L & M - Model LM 1600 NT 16oz - Needle Punched Non Woven Geotextile Fabrics

    LM 1600 NT is a nonwoven geotextile fabric manufactured from Polypropylene Staple Fiber. The fibers are randomly oriented and form a cohesive / stabilized needle punched fabric, for use in many applications. LM 1600 NT resists ultra violet deterioration, rotting, and biological degradation and is inert to commonly encountered soil chemicals.

    By L & M Supply Company based in Willacoochee, GEORGIA (US) (USA). from NTPEP Certified Non-Woven Geotextile Fabrics Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you