Nox Removal Equipment
-
Manufactured by Zhejiang Tuna Environmental Science & Technology Co., Ltd.based in CHINA
There are three mechanisms of NOx production; first thermal type; second fuel type and third quick type. The density of the discharged NOx is closely related to the boiler type, combustion conditions and the proportion of nitrogen in the fuel. Control measures can be divided into first and second degree. First degree measures ...
-
based in ITALY
Our integrated, turn-key system, includes the reagent (ammonia or urea at different % solution) storage and dosing system, proprietary designed reagent injection system, Catalyst material and reactor case with our proprietary design catalytic reactor and fluid dynamic distribution ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
Manufactured by Caldo Consultantsbased in UNITED KINGDOM
Regulated Emissions to Atmosphere; Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; hot gas filtration can be combined with other techniques to ensure that all of the ...
-
Manufactured by CECO Environmentalbased in USA
The HEE-Duall brand corrosion-resistant BetaNox Wet Scrubbers provide a unique, high-efficiency wet oxidation/reduction approach to controlling nitrogen oxide (NOx) emissions. Single and multiple stage systems provide more than 99% efficiency on total NOx removal and elimination of the red/brown NOx exhaust ...
-
Manufactured by Johnson Mattheybased in UNITED KINGDOM
NOx can be removed from a lean gas stream by chemical adsorption onto a catalyst, hence the term NOx adsorber catalyst (NAC). The process of adsorption releases ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
To remove NOx, catalytic ceramic filter elements are manufactured with nano-bits of SCR (Selective Catalytic Reduction) catalyst embedded in the walls, about 3/4 inch (20 mm) thick. These filters achieve NOx removal with over 90% ...
-
Manufactured by Global Emissions Systems Inc (GESI)based in CANADA
Our vehicle models are available for any exhaust size and can reach operating efficiency within 9 seconds of startup. Both passengers and drivers are safe from harmful emissions and noise, as hydrocarbons (HC),carbon monoxide (CO), and nitrogen oxides (NOx) are removed before they can enter the cabin. Our flow capacity prevents back ...
-
Manufactured by Shandong Baolan Environmental Protection Engineering Co., Ltdbased in CHINA
SNCR (Selective Non-Catalytic Reduction) is a selective non-catalytic reduction method. It is an economical and practical NOx removal technology. Its principle is based on NH3, urea [CO (NH2) 2], etc. Before the boiler is atomized or injected into the boiler, it is atomized by the heat in the furnace. Sprayed into the furnace temperature ...
-
Manufactured by BoldEco Environment, Inc.based in USA
The BoldEco VersaMAPS (versatile multi-pollutant control system) is a low capital and operating cost solution for removing acid gases, nitrogen oxides, mercury (both ionic and elemental) and particulate matter (including PM 2.5) concurrently. The VersaMAPS can be implemented with integrated single-stage oxidizer NOX removal or with a second ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
AirProtekt supplies either the complete Selective Catalytic Reduction (SCR) package or the SCR catalyst for control of NOx emissions. The catalyst technologies are all well proven and supported by the highest manufacturing and quality control standards from one of the leading catalyst manufacturers in the world. The AirProtekt nitrogen oxide ...
-
Manufactured by Dalian Haixin Chemical Co., Ltd.based in CHINA
m2/g. SSZ-13 shows excellent performance of NOX removal from automobile exhaust, MTO, and CO2 absorption and separation, owing to ordered pore structure, good hydrothermal stability, and more surface proton acidic center and exchangeable ...
-
Manufactured by Ecospray Technologies S.r.l.based in ITALY
The multi-pollutant axial flow filtration cassettes (Wall flow / Flow through) combine the oxidation of CO (thanks to special oxidative catalysts) with the particulate removal and NOx abatement. These cassettes are suitable for any industrial applications (for example, engines, cement industry, urban solid waste). Ecospray filters ...
-
Manufactured by Fujian Longking Co., Ltdbased in CHINA
DSC-M dry ultra-low emission control technology and equipment (DSC-M System) has been developed by Longking based on LJD dry CFB-FGD system. It’s a simple yet reliable and cost-effective system with high operational flexibility, and NOx removal can be realized by combination of SNCR/SCR/COA depending on different flue gas sources. It ...
-
Manufactured by Applied Catalystsbased in USA
the operating costs of the regenerative system. Additionally, when CO and NOx are an issue, catalysts can be an excellent option. Catalysts oxidize CO readily, and due to the low temperature required to abate the VOC’s, there is less burner NOx created than with a thermal based system (RTO). Hence, a NOx removal system and ...
-
Manufactured by Shandong Baolan Environmental Protection Engineering Co., Ltdbased in CHINA
Denitration By Oxidation mainly uses oxidants such as ozone, hydrogen peroxide or sodium hypochlorite to oxidize insoluble low-value nitrogen oxides to soluble high-value nitrogen oxides, and then absorb the nitrogen oxides with alkaline solution in the washing tower to reach Purpose of denitration. The denitration system can remove NOx, ...
-
Manufactured by F-DGSibased in FRANCE
F-DGS’s DEIMOS UZA.TOTAL Ultra Zero Air generators is able to remove Total hydrocarbons to less than 0.05 ppm and others polluant like H2O, CO2, CO, NOx, SO2. CO and THCs are removed using heated catalyst. H2O andCO2 are removed with dual molecular sieve PSA system. NOx is removed with ...
-
Manufactured by BoldEco Environment, Inc.based in USA
Single upflow reactor coupled to fabric filter. Multiple upflow reactors coupled to fabric filter. Utilizes standard hydrated lime in recycle mode. Oxidizer reactor removes NOx and oxidizes mercury. Preheat system included to avoid acid gas dew ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
Many of these VOCs are designated as HAPs (Hazardous Air Pollutants). Organic HAPs and THC are associated with many industrial processes, primarily in the cement and lime industries. These can be removed by the embedded nano-catalyst in our filters, to compliance levels while removing PM, NOx, and other pollutants at the same ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you