O2 Sensor Equipment Available In Saskatchewan
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Our new O2-Lumitrode is an optical sensor for the determination of dissolved oxygen in water or other liquid samples. Compared with conventional, galvanic sensors, the O2-Lumitrode is much easier to handle and has a longer service life. In addition, this optical sensor is completely maintenance-free. The ...
-
Manufactured by AB Micatronebased in SWEDEN
The MG-4000-R3 is intended for measuring the O2 content of flue gases from oil burners, gas burners and biofuel boilers. The MG-4000-R3 can, together with a regulator, optimize the air/fuel ratio. As a result, the highest possible fuel efficiency can be achieved and also maintained over time regardless of changes in fuel and combustion ...
-
Manufactured by Senovol Corporationbased in USA
This is an industrial standard 4-series oxygen gas sensor. It is RoHS compliant and absolutely lead-free. It is designed for the measurement of oxygen concentration in gas phase. ...
-
based in ITALY
Alma Automotive developed and put in production the first wideband oxygen sensor simulator. It allows for a complete ECU testing solution, enabling closed loop control on the air to fuel ratio. The system is conceived to have an easily connection to any HIL system with a wide choice of controlling buses, without any additional HW. The ...
-
Manufactured by Vitality Medicalbased in USA
Perfecto 2 Oxygen Concentrator 5 Liter is a small size home oxygen machine. It is less than 2 feet tall, making it easy to hide when not in use. When it is in use, it uses less power than most O2 concentrators while maintaining the same oxygen output. It offers up to 5 liters of continuous oxygen per minute. This design keeps your power bill ...
-
Manufactured by Unisense A/Sbased in DENMARK
With tip sizes of only 2-3 µm, you can measure oxygen at high spatial resolution without damaging your sample. You can choose a response time of less than 0.3 sec and attain fast and accurate oxygen measurements thanks to the insignificant oxygen ...
-
Manufactured by Sendot BVbased in NETHERLANDS
The FluoMini Pro - optical O2¦T sensor is based on the principle of fluorescence intensity. The sensitive coating on the top of the optrode contains two active components, one to measure temperature and one to measure oxygen. The temperature compensation of the oxygen measurement is thus fully integrated in the same coating. The ...
-
Manufactured by Unisense A/Sbased in DENMARK
Unisense offers optode sensor technology with full integration to our existing laboratory systems. The optical sensor technology gives you a cost-effective and robust oxygen sensor that enables a great number of ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
China Manufacturer High Quality Air Fuel Ratio Sensor Lambda Wideband Sensor 5-Wire Oxygen 02 Sensor LSU4.9 is a planar ZrO2 dual cell limiting current sensor with an integrated heater. It is used to measure the oxygen content and the λ-value of exhaust gases in automotive engines (gasoline and diesel). Its monotonic output ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
Cubic Auto Oxygen 02 Sensor is used to measure the oxygen content in automobile exhaust, and convert the oxygen content into an electrical signal that is transmitted to the ECU, this allows the engine to achieve the target excess air factor (λ= 1) in a closed-loop; Ensure maximum conversion efficiency for hydrocarbons (HC), carbon monoxide ...
-
Manufactured by Euro-Gas Management Services Ltdbased in UNITED KINGDOM
SL Oxygen sensors overcome the problems associated with standard metal can sensors. They are designed to be directly interchangeable with current sensors incorporated into fixed and portable gas ...
-
Manufactured by m-u-t GmbHbased in GERMANY
The O2-Detector module is a compact and cost-effective gas analyzer based upon the electro-chemical measurement of oxygen concentration. The O2 sensor can be calibrated for the range of 0 to 10 % or 0 to 25 % oxygen. It features a low power input, a large range of supply voltage and a long lifetime of the electrochemical ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For the economic recovery of xenon from production plants. Special features/Process: Evacuation of the customer's test chamber. Filling of the chamber with xenon. After successful testing inside the chamber, the gas is recovered and stored into cylinders. Permanent monitoring of the gas quality by means of an O2 sensor. Reuse of the recovered ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
to the presence of toxic, anoxic and explosive gases in the ambiant air. Small size, ease of installation and use are the main strengths of the plant. Used with the OLCT 10N O2 and CO2 digital sensor series or any other O2, CO2, CH4, GPL and H2 analog sensor, the MX 16 guarantees you a solution that complies with French and ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 2800P is a portable Flue Gas Analyzer for industrial applications. The rugged combustion analyzer can be equipped with up to 8 sensors. Its basic unit has an O2 Oxygen sensor , a CO Carbon Monoxide sensor, a NO Nitric Oxide sensor and a SO2 Sulfur Dioxide Sensor. The other ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Dimensions: 19” x 17” x 12”. Weight approx.: 25 lbs. Basic: O2 – CO. 2 Sensors – 4 sensor inputs max. Recommended: use with Peltier Gas Dryer IMR ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. If you require 0-1000ppm analysis, please see our ZR1000. For those applications where a source of sample flow is not available, the 905P ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious. Oxygen is the base sensor in all Testo 340 Analyzers. Simply add one, or up to three sensors for your specific job. This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you