Only show results available in Virginia? Ok

oil condition monitoring equipment

  • Showcase

    TDHI - Model TD-4100 XDC-GP - General Purpose Oil in Water Monitor

    The TD-4100 XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100 XDC and is designed for General Purpose areas (non-explosive atmospheres). It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • OilQSens - Oil Condition Monitor

    OilQSens is an oil condition monitor ideally applied to oil quality testing in high voltage transformers, continuous and online, with data transmission via LAN/WLAN. The transformers in power substations represent the largest part of the capital investment - protection of these assets is most important. Fault states in power transformers are ...

    By cmc-Instruments GmbH based in Eschborn, GERMANY. from Oil Condition Monitor Product line

  • Premium

    TDHI - Model TD-4100XDC - Oil in Water Monitor

    The TD 4100XDC is a “Closed Cell” version of the rugged, world industry standard TD-4100 XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board cleaning systems. It utilizes a clear tube flow cell to contain ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    TurnkeyLab - Model ITL - Complete Condition Monitoring Solution

    The Spectro Scientific Industrial Tribology Laboratory (ITL) is a turnkey system that provides a complete lubricant analysis condition monitoring solution. The measurements made using the Industrial Tribology Laboratory determine lubricant and machine condition, the core of any effective predictive maintenance system. Spectro Inc.’s ITL ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Complete Condition Monitoring Solution Product line

  • Premium

    LumaSense SmartDGA Guard™ - Online 4 Gas Monitor

    The SmartDGA Guard™ instrument is a cost effective early warning monitoring solution for potential transformer failures. The instrument uses Non-Dispersive Infrared (NDIR) technology to measure and record fault gases Hydrogen (H2), Acetylene (C2H2), Carbon Dioxide (CO2), Carbon Monoxide (CO), and moisture found in insulating (mineral) oil. ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Online 4 Gas Monitor Product line

  • Premium

    Spectro - Model FieldLab 58 - Portable Oil Lab

    The Spectro FieldLab 58 is a rugged, portable expeditionary fluid analysis system that gives operators in the field the ability to perform comprehensive, mobile lubricant sampling. The battery-powered device enables complete lubricant assessment for condition monitoring and rapid results that permit informed maintenance decisions. It takes only 3 ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Portable Oil Lab Product line

  • Premium

    FluidScan - Model 1000 Series - Handheld Infrared Oil Analyzer

    The FluidScan 1000 series handheld Infrared oil analyzer provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Handheld Infrared Oil Analyzer Product line

  • Premium

    Codel - Model 125 - Explosion-Proof Smoke Monitor

    In the event of a fire in a building or other structure, such as an oil rig, Health and Safety regulations require that immediate action be taken to prevent the ingress of smoke and fume into air-conditioning and ventilation ducts. The Model 125 explosion-proof smoke monitor is specifically designed to be mounted in ventilation ducts and to comply ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Explosion-Proof Smoke Monitor Product line

  • Premium

    Arjay Engineering Ltd - Model 4100-PRO - 4100-PRO Oil/Water Interface Profiler

    The 4100-PRO is a Multi Oil/Water Interface Profiler Monitor, and uses multiple sensing probes to measure the capacitance field at distinct points within the tank. The resulting profile can be used to track the vertical location of an interface/rag layer and the emulsion thickness. The data can be used for flow control, diluent and other chemical ...

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA). from 4100-PRO Oil/Water Interface Profiler Product line

  • Premium

    MiniLab - Model EL Series - Comprehensive Oil Analyzer For Engines

    Engine oil analysis is a reliable and mature non-destructive testing (NDT) technique used to monitor the condition of the engine in development, on the production line and for in-service maintenance. High performance reciprocating engines and jet turbines are complicated mechanical systems with many high speed moving parts

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Comprehensive Oil Analyzer For Engines Product line

  • Premium

    LumaSense SmartDGA Guide™ - Online 9 Gas Monitor

    The SmartDGA Guide™ instrument provides comprehensive online DGA results that enable diagnostic techniques. The instrument uses Non-Dispersive Infrared (NDIR) technology to measure and record all nine industry recommended fault gases Acetylene (C2H2), Ethane (C2H6), Ethylene (C2H4), Carbon Dioxide (CO2), Carbon Monoxide (CO), Hydrogen (H2), ...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Online 9 Gas Monitor Product line

  • Premium

    Spectro - Portable Oil Analysis Kits

    Monitoring lubricant condition is vitally important for maintaining machinery and eliminating unplanned downtime. Spectro now offers a combination kit to support asset managers and planners who need accurate, lab-grade oil condition information for time-sensitive maintenance decisions. Spectro’s portable test kit combines the power of the ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Portable Oil Analysis Kits Product line

  • GearWatch - Condition Monitoring

    Our GearWatch condition management system is a smart and compact tool for predictive remote process equipment monitoring. GearWatch measures, records and analyses data, reporting any changes in measured parameters in real time, 24/7 via the internet. Oil particle content monitoring enables early detection of potential gear unit failures months, or ...

    By Santasalo Gears Oy based in Jyväskylä, FINLAND.

  • On-Line Oil Condition Sensor

    Extending oil service life isn’t guesswork. Lubricants continue to develop and perform better but remain at risk from changing operating and environmental conditions. That’s why your oil analysis service includes an oil condition monitoring feedback. It helps you detect when your oil may no longer be fit for service even pinpointing a ...

    By Kittiwake - Parker Hannifin Corp based in Littlehampton, UNITED KINGDOM. from On-Line Oil Condition Sensor Product line

  • Premium

    FluidScan - Model 1200 - Portable Marine BN Analyzer

    Today, marine engine suppliers recommend daily monitoring of the Base Number (BN) to optimize cylinder lubrication feed rate and determine the residual BN of the piston underside oil. Changes in vessel operation are driving innovation in engine monitoring .The shift to “slow steaming” and the resulting “cold corrosion” ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Portable Marine BN Analyzer Product line

  • Model 4212 - In-Line Condition Monitoring Sensor

    Fine and coarse particle contamination is a major cause of breakdowns in hydraulic and lubrication oil systems; therefore continuous real-time oil debris monitoring plays a crucial role in developing a predictive maintenance strategy.

    By Gill Sensors & Controls Limited based in Lymington, UNITED KINGDOM. from In-Line Condition Monitoring Sensor Product line

  • OSIL - Oil Spill Monitoring Buoys

    OSIL’s Tern, Fulmar, Skua & Albatross Data Buoy’s are robust, versatile instrumentation platforms ideally suited for the detection of oil spills and slicks to protect vulnerable areas day and night even under harsh weather conditions.

    By Ocean Scientific International Ltd (OSIL) based in Havant, UNITED KINGDOM. from Oil Spill Monitoring Buoys Product line

  • In-Line Sensing Probes

    The first implementation of the Sentelligence sensor platform was the in-line oil condition monitoring probe sensor that was developed for real-time monitoring of diesel lubricants condition and quality by measurement of soot build-up.

    By Sentelligence, Inc. based in Carmel, INDIANA (USA).

  • AD Systems - Model DT100DL - In-Service Engine Oils with Blotter Spot Method

    The requirement for on-line machinery and oil condition monitoring is becoming evermore apparent as maintenance costs increase and production capacity and equipment performance are maximized. One of the primary functions of a lubricant is to preserve the cleanliness of a combustion engine's mechanical parts. The cleanliness of the mechanical parts ...

    By AD Systems based in Saint-André-sur-Orne, FRANCE.

  • Model OMD- 7 MKII - Industrial Monitors

    DECKMA HAMBURG GmbH are proud to announce the launch of an all new Oil-in-Water Monitor, the 'OMD-7 MKII Industrial Monitor', designed to measure the content of Free Oils, Suspended Solids and Turbidity in Water continuously and independently. This design represents the first all new Industrial Monitor capable of distinguishing between the ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you