Only show results in Virginia? Ok

oil content monitoring equipment

  • Premium

    TDHI - Model TD-107 - Oil Content Monitor

    The TD-107 Oil Content Monitor is the most reliable way to to measure oil content in a typical ship’s oily waste holding tank, bilge, or oily water separator.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • HORIBA - Model OCMA-500 - Oil Content Monitor

    The OCMA-500 Oil Content Monitor has been redesigned for even better operability, maintaining its user-friendly features.After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The OCMA-500 cuts ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Oil Content Monitor Product line

  • OILSENTRY - Model OS-100 - Oil Content Monitor

    Oil Content Monitor built to USCG/IMO (MEPC.60(33)) requirements; consisting of self cleaning Sensor Unit, Control Unit with built-in Strip Chart Recorder, interconnect cable, Remote Status Indicator, and tech manual.

    By Inventive Systems Inc. based in Lexington Park, MARYLAND (USA). from Oil Content Monitor Product line

  • OCMA - Model 550 - Oil Content Monitor

    OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Oil Content Monitor Product line

  • Oil Content Monitor

    The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains high ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Oil Content Monitor Product line

  • HORIBA - Model OCMA-25 - Automatic Oil Content Monitor

    Over the past several decades, HORIBA has designed and manufactured a complete line of high-quality non-dispersing infrared analyzers and analyzer systems. HORIBA has extended infrared gas analyzer technology to the continuous measurement of oil in water for process monitoring and waste water alarm applications. The OCMA oil content analyzers are ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Automatic Oil Content Monitor Product line

  • OILSENTRY - Model OS-100HT - High Temperature Oil Content Monitor

    Oil Content Monitor built to USCG/IMO (MEPC.60(33)) requirements; consisting of self cleaning Sensor Unit, Control Unit with built-in Strip Chart Recorder, interconnect cable, Remote Status Indicator, and tech manual.

    By Inventive Systems Inc. based in Lexington Park, MARYLAND (USA). from High Temperature Oil Content Monitor Product line

  • Model TD-107 - 15 PPM Bilge Oil Content Monitor

    The TD-107 Fluorescence Oil Content Monitor (OCM) is a 15 ppm bilge alarm for oily water separators based on fluorescence detection technology. Fluorescence makes the TD-107 resistant to interferences by turbidity or particles and sediments in the bilge which impact competing 'light scatter' oil content monitors. Because silt, algae, iron oxide ...

    By NAG Marine based in Norfolk, VIRGINIA (USA). from 15 PPM Bilge Oil Content Monitor Product line

  • Model TD-107 5.0 - 5 PPM Bilge Oil Content Monitor

    The TD-107 5.0 is the world's first and only DNV Clean Design Certified 5ppm Bilge Oil Content Monitor. The TD-107 5.0 is an extension of the highly successful TD-107 Oil Content Monitor for oily water separators, except with an added level of testing and certification for 5ppm applications by Det Norske Veritas' Clean Design program.

    By NAG Marine based in Norfolk, VIRGINIA (USA). from 5 PPM Bilge Oil Content Monitor Product line

  • RET - Stand Alone Monitor (SAM) - Oil Content Monitor

    Safely and legally discharge water knowing that it meets the discharge limit. Discharge flow rates can be very high allow for a lot of rain water to be discharged quickly and easily. The SAM unit takes a sample of the discharge water and monitors the oil content, keeping records of every discharge or other activity for 18 months as the law ...

    By Recovered Earth Technologies, LLC based in McCarran, NEVADA (USA). from Stand Alone Monitor (SAM) - Oil Content Monitor Product line

  • OOPS Filter Overboard Oil Protection System

    The simple flow thru OOPS filter works with any bilge pump and automatically removes oils from your bilge water. This OOPS filter system uses the same organoclay filter media that we use on the BRUTE/ B USCG/ABS/BV certified separators. We can rack up 3 or more OOPS filter cartridge housings and mount a 2005 USCG approved oil content monitor ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from OOPS Filter Overboard Oil Protection System Product line

  • Factair - Model F6300 - Oil Vapour Monitor

    The F6300 Oil Vapour Monitor is a wall mounted instrument which provides a continuous reading of residual oil content in the compressed‐air supply with a calibrated range down to 0.01 mg/m3 (ISO8573 class 1). For the most critical application this instrument removes the requirement for periodic sampling and laboratory analysis.

    By Factair Limited based in Ipswich, UNITED KINGDOM. from Oil Vapour Monitor Product line

  • Model OMD- 7 MKII - Industrial Monitors

    DECKMA HAMBURG GmbH are proud to announce the launch of an all new Oil-in-Water Monitor, the 'OMD-7 MKII Industrial Monitor', designed to measure the content of Free Oils, Suspended Solids and Turbidity in Water continuously and independently. This design represents the first all new Industrial Monitor capable of distinguishing between the ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

  • ODME 2005 Oil Discharge Monitor

    The JOWA ODME 2005 Oil Discharge Monitor is approved in accordance with the test and performance requirements for 'third generation' monitors, according to IMO resolution MEPC 108(49). The requirements of the MARPOL Convention are that all oil tankers with a gross tonnage of 150 GRT and above must have an oil discharge monitoring and control ...

    By JOWA based in Kållered, SWEDEN.

  • Model MEPC 107 (49) - Smart Cell Bilge Alarm - Simultaneously Monitor

    IMO Resolution MEPC 107 (49) came into effect on 1st January 2005 and applies to all new installations of oil content monitors within engine room spaces. This applies to existing ships and ships whose keel was laid on or after 1st January 2005. The Rivertrace Smart-Cell Bilge Alarm meets the requirements of MEPC 107 (49) for the monitoring of ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Smart Cell Bilge Alarm - Simultaneously Monitor Product line

  • Smart Odme - Oil Discharge Monitoring Equipment

    The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge in accordance with the requirements of MEPC 108(49). Discharge limits are set at 30 litres per nautical mile, and the total discharge is expressed as a proportion of the previous cargo for dirty ...

    By Rivertrace Engineering Ltd based in Redhill, UNITED KINGDOM. from Oil Discharge Monitoring Equipment Product line

  • GearWatch - Condition Monitoring

    Our GearWatch condition management system is a smart and compact tool for predictive remote process equipment monitoring. GearWatch measures, records and analyses data, reporting any changes in measured parameters in real time, 24/7 via the internet. Oil particle content monitoring enables early detection of potential gear unit failures months, or ...

    By Santasalo Gears Oy based in Jyväskylä, FINLAND.

  • Xenemetrix - Model Petro-Marine - On-Board Fuels & Oils Monitoring System

    Key Applications: Detection of Sulfur content in bunker diesel fuels, Cat Fines- avoiding engine failure, Sea water contamination, Wear metals in oils & fraudulent mixing in bunker fuels.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL. from On-Board Fuels & Oils Monitoring System Product line

  • RET - Mini Separator for Small Boats

    Vessels smaller than 400 GT are not required to have a certified OWS, however many choose to be environmentally responsible. The Mini Separator is a great way to do that. Oil is removed by filtration only, but still monitored by a IMO 107(49) certified oil content meter.

    By Recovered Earth Technologies, LLC based in McCarran, NEVADA (USA). from Mini Separator for Small Boats Product line

  • CONOSTAN - Chlorine Standards

    Monitoring the chlorine content is important in various oils and oil products:• In crude oils, chlorine is often naturally occurring, and may bias the sulfur measurement during crude oil blending or cause damage in the refining process.• The balance of sulfur and chlorine is also critical for cutting fluid efficiency and lubricity to avoid damage ...

    By SCP SCIENCE based in Baie D`Urfe (Montreal), QUEBEC (CANADA). from Chlorine Standards Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you