Only show results in Virginia? Ok

Oil Dewatering Container equipment

  • Premium

    WesTech - Oil / Water Separator

    Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Oil / Water Separation Product line

  • Bruns - Model 450-001 - Dewatering Container

    Art. Nr. 450-001: BRUNS dewatering container with stainless-steel screens and drainage canal. Sludge dewatering is carried out by gravity. Materials to be dewatered: canal residues, refuse, grit, oil-contaminated substances, screenings, etc. This roll-off container is equipped with a hinged cover with manual hydraulics and an opening angle of ...

    By Bruns GmbH & Co.KG Umwelt- und Entsorgungstechnik based in Geeste-Dalum, GERMANY. from Dewatering Container Product line

  • Premium

    ASTiM - Chamber Filter Press

    Pressure filtration is a very cost effective way of producing sludge cakes with high DS concentrations, along with an extremely high degree of clarity in the filtrate. Because of the simplicity and flexibility, the chamber filter press is the most used and reliable machine for solid / liquid separation and sludge dewatering plants. ASTiM chamber ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Sludge Treatment Technology - Sludge Dewatering Product line

  • Dewatering Pump

    Used to transfer clear water from a holding tank to a sewer system or vice-versa, this 2″ 158 GPM or (3″ 264 GPM) Honda Powered Commercial Water Transfer Pump is a great solution for maintaining an environmentally friendly workspace. Its 6.5HP engine provides plenty of power to get the water moving while an aluminum Pump Housing & ...

    By MEP Environmental Products based in Winnipeg, MANITOBA (CANADA). from Environmental and Spill Containment Product line

  • FRIESS - Model VOD - Vacuum Oil Dewatering System

    Friess VOD Vacuum oil dewatering removes water, gases and dirt particles from hydraulic oils, turbine oils and other mineral oils in a simple, fast and reliable way.

    By FRIESS GmbH based in Monheim am Rhein, GERMANY. from Vacuum Oil Dewatering Product line

  • SpinPro - Turbidity Silt Curtains for Dredging and Wastewater Ponds

    Turbidity Curtains also referred to as Silt Curtains, Silt Barriers, or Turbidity Barriers, Turbidity Curtains or Floating Barriers are designed to deflect, contain and isolate sediment in order to stop or reduce suspended or floating particles from migrating from one area to another. Applications include Dredging, Marine ...

    By SPINPRO based in Bellingham, WASHINGTON (USA). from Dewatering Tubes Product line

  • Model SDU - Dewatering Filter

    In many coolant filtration systems, conveyorized tanks are used to automatically remove the settleable solids and discharge the material into a drum or hopper for disposal. In this process, “free” liquids often get trapped in the solids and accumulate on the surface of the container. This “free” liquid makes container ...

    By Filtertech based in Manlius, NEW YORK (USA). from Dewatering Filters Product line

  • UltraTech - Dewatering Bags

    Contain sediment and oil pumped out during dewatering operations. Detains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Accommodates up to 4' discharge hose.  Optional hose connector available - makes connecting and disconnecting Dewatering Bags ...

    By UltraTech International, Inc. based in Jacksonville, FLORIDA (USA). from Erosion Control Product line

  • Audex - Model AM Series - Dewatering Pumps

    The Audex AW series comprises of the AW 2-040 with a 51 mm (2') outlet and the AW 3-075 with a 80 mm (3') outlet. The 80 mm model (AW 3-075) offers increased head and flow capability over the 50mm model (AW 2-040). Both the AW 2-040 and the AW 3-075 feature a cast iron pump casing with a solid cast aluminium body. An impact resistant. PVC strainer ...

    By Audex Pumps based in Handsworth, Sheffield, UNITED KINGDOM.

  • Ultra Dewatering Bag

    Contain Sediment And Oil Pumped Out During Dewatering Operations. Detains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Accommodates up to 4' discharge hose. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm ...

    By UltraTech International, Inc. based in Jacksonville, FLORIDA (USA). from Stormwater Management Product line

  • Premium

    Sludge Drying Process

    Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Process Lines Product line

  • Ultra-Dewatering Bag

    Contain Sediment And Oil Pumped Out During Dewatering. Detains both oil and sediment, offering a combination of benefits not available in alternative dewatering bags. Standard and custom sizes available. Accommodates up to 4' discharge hose. Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water ...

    By Spill Source based in Denver, NORTH CAROLINA (USA). from Erosion Control for Stormwater Product line

  • Sludge Dewatering Evaporator (SDE)

    SDE is designed to automatically evaporate water out of oily sludge. Oily Water Separators (OWS) have difficulties handling dirty drain water from sludge tank. Water content of 60-80% in oily sludge is common. Focus is on clean water output and on a waste oil product with less than 3% water. Water outlet contains less than 5 ppm oil. To achieve ...

    By Faroe Maritime Technic (FMT) based in Vágur, FAROE ISLANDS.

  • Model AVC/EOD/DOD - On-Site Dewatering Unit

    Realising that the average sludge contained a high percentage of water, which was needlessly being transported for disposal at the local waste water Treatment works, Simon Moos decided to develop an on-site system that would take the treatment works to the sludge and the AVC & DOD/EOD where born. The principle behind the MOOS AVC/EOD/DOD ...

    By Simon Moos Maskinfabrik A/S based in Sønderborg, DENMARK.

  • KSA - Mobile Sludge Dewatering Unit

    The first KSA mobile sludge dewatering unit was build in 1978 by Simon Moos Maskinfabrik A/S. The principle behind the MOOS KSA system is “volume reduction”. Simon Moos realising that an average tanker load of sludge contained a high percentage of water which was needlessly being transported to the waste water treatmentplant, Simon ...

    By Simon Moos Maskinfabrik A/S based in Sønderborg, DENMARK.

  • SP Industries - Model PC-3000-DW - Dewatering Precrusher Systems

    Out-perform Conventional Dewatering systems - Wet Material is Pressed Against a Steel Barrier, Not Against Previously Processed Material. Proven as a Superior Method for Dewatering Bulk Material in Applications for Recycling, Pulp/Paper, and Food Canning & Packaging. Available in Standard Loading Capacities from 3 to 9 Cu. Yds. Customized ...

    By SP Industries, Inc. based in Hopkins, MICHIGAN (USA). from Industrial Precrushers Product line

  • Tsurumi - Model KRS Series - High Volume Dewatering Pump

    Heavy-Duty, High Efficiency, High Volume Dewatering Pumps featuring all Cast Iron construction for maximum corrosion resistance. It represents Tsurumi's multipurpose pumps for their simple construction, superb durability, and high efficiency, suitable for even the most demanding jobs.

    By Tsurumi Pumps based in Glendale Heights, ILLINOIS (USA). from Contractors Pumps Product line

  • Premium

    Partial Sludge Drying

    Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Process Lines Product line

  • Premium

    ProMinent - Model Spectra - Eccentric Screw Pump

    Capacity range 2.4 – 12,000 l/h, 12 – 3 bar; The eccentric screw pump Spectra meters liquid polyelectrolytes in concentrated and dilute form. It can be used, for example, in waste water treatment or sludge dewatering.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Chemical Transfer Pumps Product line

  • Model API Series - Oil/Water Separators

    The HydroFlo Tech API oil water separators are the performance, safety and environmental standard by which all others are judged. Our separators are installed at some of the largest chemical and petroleum refineries located throughout the world.

    By Hydro Flo Technologies LLC based in St Charles, ILLINOIS (USA). from Oil/Water Separators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you