oil-in-water Equipment in Germany

4493 Results found

Current filtering criteria

You can remove a filter by clicking on the x

AWAS - Model HI 1999 - Freestanding Oil-Water Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Universal separator with less than 5mg/l final oil content made of stainless steel EN 1.4301/ AISI 304 for free standing installation, in a building or buried tanks. The design permits to have water inlet and outlet either in front or at the side walls. LGA Bayern tested acc. to EN 858 class I with less than 5 mg/l final oil content.

AWAS - Model Galaxie 1902 / 2002 - Oil-Water Vortex Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated plates - ...

SeaOWL - UV-A (Sea Oil-in-Water Locator)

by Sea-Bird Scientific - a subsidiary of Danaher Corporation     Office in Kempten, GERMANY

Based upon the highly successful WET Labs’ ECO sensor, Sea-Bird Scientific has developed an industry leading detection technology creating a 5X optical resolution improvement over its predecessor.

Oxymat - Oil and Water Separators

by Oxymat - Oxygen Generators     Office in Wessling, GERMANY

All compressors produce a condensate with hazardous waste of oil and dirt. This condensate must be treated with care. The product is polluted and must not be led out in the sewage or on the floor. The contaminated water should be collected in an Oil and Water separator. The separator will separate the condensate into water and oil through a secure ...

LÖSI - Oil and Water Heat Exchangers

by LÖSI Getriebe-Steuerungen Hydraulik GmbH     based in Kaiserslautern, GERMANY

Our oil-water cooler is designed as a shell and tube heat exchanger. They provide a large cooling surface at small dimensions. The extremely high efficiency allows heat capacities up to 300 kW.

Fluorat - Model AE-2 - Oil-In-Water Analyzer

by Lumex Instruments Group     Office in Wakendorf II, GERMANY

Fluorat AE-2 analyzer is designed for continuous automatic monitoring of content of petroleum hydrocarbons in potable, natural, and waste water. The instrument comprises a sample preparation unit and a FLUORAT®-type luminescence detector. The sample preparation unit provides metered water feed and switching of the water and reagent flows, ...

Model Series BWT - Oil / Water Cooler

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Highly efficient heat transfer. Compact dimensions. Low water consumption. Highly turbulent flow. Very efficient oil / water cooler with small physical dimensions. Easy handling and installation. Due to highly turbulent flow very little tendency of fouling, almost maintenance free.

Model Series M, GC, GX und GM - Oil / Water Cooler

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Highly efficient heat transfer. Gasketed plates. Various material combinations. Thread or flange connections. Plate heat exchanger in gasketed version easy to adapt to application specs.

Model Type OMD-7 - Oil In Water Monitors - Continuous Measurement of Oil In Water and Waste Water

by AGO Hydroair GmbH     based in Berlin, GERMANY

For all ranges of the industry the continuous monitoring of oil in effluent during the direct or indirect discharge is a very important aspect. An operational disturbance is to be recognized therefore fast, and the emission source can meet appropriate measures, in order to limit the damage. The measuring procedure is based on the dispersion of ...

Leakwise - Controllers For Leakwise Oil On Water Monitoring Systems

by GE Analytical Instruments     Office in GERMANY

A Leakwise Oil-on-Water Monitoring System consists of a controller (signal processor) and one or more sensors, depending on application needs.

SeparatorsPlus - Oil / Water Separators and Interceptors

by Highspeed Group Ltd     Office in Hamburg, GERMANY

Oil separators are fitted to surface water drainage systems to prevent pollution by oils and to protect the environment. The Groundwater Regulations, for example, prohibit discharge into the ground and/or watercourses of pollutants such as hydrocarbons (oils, greases, fuel etc.). Oil Separators separate oil from the water, retaining it safely ...

OKO - Mobile Oil-water Separators

by OKO-tech Maschinenbau GmbH & Co.KG     based in Hess. Oldendorf, GERMANY

Mobile oil-water separators are mainly used for cleaning stationary oil-water separators and interceptors. The oil is removed from the oily-water phase. The water is returned into the cleaned interceptor. The waste disposal contractor only removes the sludge from the sludge collector and the oil separated. For repeating leak tests and for renewing ...

ACO - Spill Control Oil-Water Separator

by ACO Polymer Products, Inc.     based in Rendsburg, GERMANY

The ACO spill control oil-water separator is based on the principle of gravity; where oil is sighter than water and will float and that solids are heavier and will therefore sink. It does not use enzymes or require frequent maintenance just periodic removal of solids and oils.

ACO - Model Oleopator P - Spill Control Oil-Water Separator

by ACO Polymer Products, Inc.     based in Rendsburg, GERMANY

The ACO Oleopator P is a range of oil/water separators that allow sediments and light liquids to be separated out simultaneously in one tank and are designed to achieve high performance at large flows in a compact tank.

Oil-Water and Parallel Plate Separators

by Klärtechnik Reinhardt GmbH     based in Eutin, GERMANY

Fuel stations, auto repair shops and car wash need a special treatment of the produced waste water, as it contains liquids like oil and gasoline which can contaminate the ground water. Similar to grease traps, oil-water separators are used here.

EOS - Model QR - Quick Release Soluble Substrate

by EOS Remediation, LLC     Office in EU, GERMANY

EOS QR is a quick release soluble substrate for rapid fermentation and short-lived electron donor addition. EOS QR is designed to pre-condition the aquifer creating a highly reducing redox state and initiate enhanced anaerobic dechlorination of contaminated groundwater.

AWAS - Model Galaxie 2002 - Tower Separates Oil and Sludge

by AWAS International GmbH     based in Wilnsdorf, GERMANY

The AWAS Galaxie Tower separates oil and sludge at the same time. Surface oil will be collected via a patented removal system in an oil tank. Sludge and particles will quickly settle at the bottom, from where they can easily be disposed.

EOS - Model PRO - Nutrient-enriched, DoD-validated, Emulsified Vegetable Oil (EVO)

by EOS Remediation, LLC     Office in EU, GERMANY

EOS PRO is a nutrient-enriched, DoD-validated, emulsified vegetable oil (EVO). EOS PRO is engineered to quickly stimulate microbial activity while providing long-term nourishment to enhance anaerobic bioremediation of chlorinated solvents, nitrates, perchlorate, energetics, acid mine drainage, and other recalcitrant chemicals in contaminated ...

AWAS - Model Galaxie 1905 SK - By-Pass Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Water coming from big rainfalls will take away the oil from the surface within the first minutes. This first flow is treated in a Vortex oil separation system Galaxie acc. to EN 858 class I with less than 5mg/l final oil content. After reaching the pre-defined flow the excess water - which is free of oil - will by pass the Vortex insert and flow ...

EOS - Model LS - Low Salt Emulsion

by EOS Remediation, LLC     Office in EU, GERMANY

EOS LS is a low salt emulsion, formulated to minimize the dramatic spike of dissolved sodium (Na) in the aquifer that is caused by many other injectable remediation products. EOS LS is designed to enhance anaerobic bioremediation of chlorinated solvents, nitrates, perchlorate, energetics, acid mine drainage and other recalcitrant chemicals in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you