Showing results for: Oil-In-Water Equipment In California
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XDC is a closed cell version of the rugged, world industry standard TD-4100XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It utilizes a clear tube flow cell to contain ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-120 Oil in Water Monitor, developed from more than 20 years of real-world experience with UV fluorescence technology, offers industry leading features. The online monitor is resistant to dirty or turbid water influences that typically impact UV absorption or light scatter instrument measurements—allowing hydrocarbons, ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis with the TD-550 oil in water analyzer. The TD-550 is suitable for crude oils and other heavy oils with a greatly enhanced detection range (low ppb to 5000 ppm) over most ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
After many years of successful service, the popular TD-3100 benchtop analyzer is no longer in production. The all new TD-550 and TD-560 have replaced the TD-3100 as benchtop analyzers. Turner Designs Hydrocarbon Instruments will continue to support the TD-3100 for spare parts and service. Please contact a sales representative or your local authorized dealer for more ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-2500 combines ultrasonics and a time-tested insertion probe to offer the ultimate in early detection of high concentrations, or slugs, of oil in waste water. Ultrasonic technology measures oil at high concentrations, typically seen after oil/water separation, is sensitive to droplets, solids or gas bubbles ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
After many years of successful service, the popular TD-500D oil in water meter is no longer in production. The all new TD-550 and TD-560 have replaced the TD-500D as portable analyzers. Turner Designs Hydrocarbon Instruments will continue to support the TD-500D for spare parts and ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100XDC and is designed for use in non-explosive atmospheres. It was designed for normally clean water applications, or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XD is a ruggedized version of the TD-4100 continuous online oil in water monitor. The XD is designed specifically for offshore oil production, refining, petrochemical, mining, and other industries that require robust online hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XD General Purpose monitor is a lower cost version of the industry standard TD-4100XD and is designed for use in non-explosive atmospheres. It was designed for dirty water applications and uses our standard EZ Access noncontact flow cell for lower maintenance. Field validation is via our CheckPOINT™ solid calibration ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
Most oilfield produced waters and other oily waste waters have high fouling potential for optical sensors. High cost ultrasonic cleaning systems only address the local optical path and not the entire sample system. Our clean-in-place (CIP) system addresses the entire sample system in the same way that CIPs are used to clean heat ...
-
Manufactured by Product Level Control Inc. (PLC)based in USA
Product Level Control is a distributor of Hydro Quip oil/water separators. We accurately size and specify separator models according to flow rate, fluid temperature range, density & viscosity, oil droplet size & distribution, and client-specified discharge requirements. We offer a full range of fiberglass, A36 carbon steel and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The product is separated through liquid flow by passing through a media pack allowing for product, water, solids separation oven a given time, maximum flow rate for the unit being no greater than 60Lt ...
-
Manufactured by Lantec Products, Inc.based in USA
You really won’t believe what HD Q-PAC® will do for your biotrickling filter. Eliminate the need for chemicals in odor-control scrubbers, or improve oil removal efficiency in compact oil-water ...
-
Manufactured by Oil Solutions International, Inc.based in USA
Also use to remove rainbow on water after a overfill when refueling. Step 1 only is Perfect for Marine use. Totally safe to clean gas and oil from fiberglass. Cleans diesel soot stains. Treats 200sq/ft per gallon. For Spills On Hard Surfaces and Soils Includes One Gallon of OS Step 1 Liquid. OS Step 1 is a green degreaser like no ...
-
Manufactured by Tomopal, Inc.based in USA
Gas Filters are primarily used for removing water, oil and other foreign materials from the inert carrier gasses such as nitrogen, helium and ...
-
Manufactured by Flo Trend - a Wassar Logistics Holdings, LLCbased in USA
The Flo Trend® Systems' Phase 3 Oil / Water Separator uses coalescing tubes for the optimum separation of oil from water. A series of baffles and weirs in the vessel reduces turbulent flow and promotes laminar even flow through the vessel. ...
-
Manufactured by Water Maze - a brand by Kärcher North Americabased in USA
The Water Maze Alpha is a highly effective above-ground oil-water separator designed to discharge wash water to the sanitary sewer at rates of up to 30 GPM. The genius of the Alpha is the proprietary 'maze' design of up to 1000 sq. ft. of inclined coalescing plates, which draw oils from wash ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The H.OIL oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink ...
-
Manufactured by HERON Instruments Inc.based in CANADA
The Sm.OIL oil/water interface meter has the same functionality of our H.OIL oil/water interface meter. This compact unit only comes in one tape length (20m or 60’) on a small hand held frame designed for easy portability. The premium padded carry case comes included to protect your precision instrument from the elements. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you