Oil Monitor Equipment
-
ShowcaseManufactured by InterOcean Systems LLCbased in USA
/dispatch points, loading racks, and storm water discharge points and outfalls. Oil detection sensors are used at single points or in a system array to continuously monitor for accidental leaks and ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
Water-in-Oil Monitors and Systems. Measurement of free Water in ...
-
Manufactured by ZelenTech Pte Ltdbased in SINGAPORE
ZelenTech ZT-100 Water In Oil Monitors are designed to detect water contamination in virtually any kind of oil or fuel. It works with diesel, heavy fuel oil, engine lubrication oil, gear box oil, hydraulic oil, turbine oil, vegetable oils and ...
-
Manufactured by EESiFlobased in USA
The EASZ-1 oil/water monitor is a highly accurate online analyzer that is installed in a pipe and measures the amount of water in any oil or hydrocarbon under pressure. Water contamination in oil is often measured for various purposes to prevent loss of revenue, additive depletion, oil oxidation, corrosion, ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: Detection of Sulfur content in bunker diesel fuels, Cat Fines- avoiding engine failure, Sea water contamination, Wear metals in oils & fraudulent mixing in bunker ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just ...
-
Manufactured by Arjay Engineeringbased in CANADA
Continuous monitoring for % concentration of water in oil emulsions. The 4100-OWM is used for monitoring as the water phase changes to oil in a tank or pipe. A probe inserted into a tank or pipe measures the capacitance field. This is ideal for general oil-in-water testing and other liquid phase changes in a ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The OilGuard works on the fluorescence principle. The design uses a free-fall measuring system that eliminates contact between the sample and the flow cell. Adoptions to various types of oil are carried out by means of calibration curves, a control glass makes it easy to check or recalibrate the instrument. A pressurized-enclosure ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The OilGuard works on the fluorescence principle. The design uses a free-fall measuring system that eliminates contact between the sample and the flow cell. Adoptions to various types of oil are carried out by means of calibration curves, a control glass makes it easy to check or recalibrate the instrument. A pressurized-enclosure ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The OCMA-500 Oil Content Monitor has been redesigned for even better operability, maintaining its user-friendly features.After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample measurement and draining. This machine is easy for anyone to use.The ...
-
Manufactured by Inventive Systems Inc.based in USA
Oil Content Monitor built to USCG/IMO (MEPC.60(33)) requirements; consisting of self cleaning Sensor Unit, Control Unit with built-in Strip Chart Recorder, interconnect cable, Remote Status Indicator, and tech ...
-
Manufactured by SkimOil, LLCbased in USA
The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains ...
-
Manufactured by Factair Limitedbased in UNITED KINGDOM
The F6300 Oil Vapour Monitor is a wall mounted instrument which provides a continuous reading of residual oil content in the compressed‐air supply with a calibrated range down to 0.01 mg/m3 (ISO8573 class 1). For the most critical application this instrument removes the requirement for periodic sampling and laboratory ...
-
Manufactured by KSB Groupbased in GERMANY
ODME(Oil Discharge Monitoring Equipment) is an equipment for observing and deciding to discharge the cargos according to the rules when each tanker hull is cleaned with sea water after discharging cargos reloading another cargos. They are discharged again after being stored in the slop ...
-
Manufactured by Agar Corporation Ltd.based in USA
Hydrocarbon on water detector for sumps (wet), tanks, ponds, and groundwater ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
For the continuous on-line monitoring of discharge water during de-ballasting operations, VAF Instruments is one of world’s main suppliers. The Oilcon® Mark 6 oil discharge monitoring & control systems are more reliable and more accurate than any other monitoring & control system. It is suitable for all ballast ...
-
Manufactured by Recovered Earth Technologies, LLCbased in USA
Safely and legally discharge water knowing that it meets the discharge limit. Discharge flow rates can be very high allow for a lot of rain water to be discharged quickly and easily. The SAM unit takes a sample of the discharge water and monitors the oil content, keeping records of every discharge or other activity for 18 months as the ...
-
Manufactured by Flow-Mon Limitedbased in UNITED KINGDOM
Suitable for practically all liquids and gases (safe gas). A spring loaded valve plate which is deflected proportionate to the flow in line. A mechanical pointer indicates the flow on an individually calibrated scale. Whether you are looking for an Oil Flow Monitor or a Water Flow Monitor our Small Series will be ideal for your ...
-
Manufactured by Agar Corporation Ltd.based in USA
Hydrocarbon layer thickness monitor for oil/water separators, groundwater wells, sumps (wet), tanks, and ...
-
by Jowa ABbased in SWEDEN
The requirements of the MARPOL Convention are that all oil tankers with a gross tonnage of 150 GRT and above must have an oil discharge monitoring and control system installed, incorporating an approved oil content meter, with a starting interlock and an automatic overboard valve control system. Oil Discharge ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you