Only show results available in Michigan? Ok

oil recovery equipment equipment

  • Premium

    Vortex - Oil & Coolant Extraction Tool

    The Vortex Oil and Coolant System is the easiest and safest way to extract and pump oil and coolant to holding tanks. With tooling for oil plugs, and easy to use coolant spike, this is the most efficient system on the market.

    By Vortex De-pollution (USA) LLC based in Denver, COLORADO (USA). from Vehicle Drain Equipment - Fluid Recovery Tools Product line

  • Premium

    CECO Peerless - Deoiling Hydrocyclones

    Deoiling Hydrocyclones were developed for the offshore oil industry in the 1980s and rapidly became established as standard equipment used for recovery of oil from Produced Water streams in both onshore and offshore applications. The deoiling hydrocyclone vessel is designed to reduce the oil content of the incoming produced water prior to entering ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Produced Water/Oily Water Treatment Product line

  • Towable Bladder Tanks

    Our Granite Environmentasl towable bladder tanks are an easy way to add capacity to oil recovery equipment used in water response situation. They are easy to deploy as floating bladder tanks in the water or can be used for additional storage capacity on land, thus being very flexible for response situations. These bladders come in a range of sizes ...

    By GEI Works, Inc. based in Sebastian, FLORIDA (USA). from Portable Tanks Product line

  • Model Sprut-1 - Oil Skimmer System

    Oil skimmer system “Sprut-1” manufactured by the company «ECOservice-NEFTEGAZ» is designed for oil/petroleum products skimming from water surface (capacity – up to 15 m3/h).  Skimmer system «Sprut-1» allows to use interchangeable oil recovery cartridges of oil/brush-, drum- or disk-type. All ...

    By ECOservice-NEFTEGAZ Ltd based in Zhukovsky, RUSSIA. from Oil Recovery Equipment Product line

  • Lamor - Model C 75 H - Oil Transfer Pump

    The unique design of the hydraulic oil transfer pump C 75 H is ideal for multiple oil recovery applications for light and heavy viscous oils, petroleum industry products, slurries and dirty water. The C 75 pump can be utilized with a wide variety of oil recovery equipment and skimmers.

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Oil Spill Response Products - Pumps Product line

  • Lamor - Model MSP 150 - Oil Transfer Pump

    The oil transfer pump MSP 150 is a high capacity unit that has been designed for efficient handling of viscous liquids, bulky solids and shear-sensitive liquids. The MSP 150 is ideal for oil recovery equipment e.g. offshore skimmers and for offloading holding tanks etc. It is suitable for operation in hazardous areas.

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Oil Spill Response Products - Pumps Product line

  • Model Barrier-Sorb series - Oil Containment Booms

    The Barrier-Sorb series absorbing oil booms manufactured by company ECOservice-NEFTEGAZ» are designed for efficient containment of oil, petroleum products and other pollutants spilled over water surface. The offered oil booms are effective to use as for efficient containment of oil, petroleum products and other pollutants spilled over water ...

    By ECOservice-NEFTEGAZ Ltd based in Zhukovsky, RUSSIA. from Oil Containment Booms Product line

  • Inlander Work Boat & Barge - Work Boats

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - Environmental

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - For Inland Response

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - Inlander Boat & Barge

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - New from Elastec

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - Waterway Workboat

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Inlander Boat & Barge - Keeping Our Waterways Clean

    The Elastec Inlander Boat and Barge is built for quick response and for hauling heavy loads - a workhorse on the waterways. The Inlander Boat and Barge is a shallow draft vessel system - a safe and functional alternative to the use of fishing boats for response operations. The 22 ft / 6.7 m long boat has a modified V-hull with a 6-degree ...

    By Elastec based in Carmi, ILLINOIS (USA).

  • Lean Oil Absorption Vapor Recovery Equipment

    Lean Oil Absorption systems, along with Refrigeration Condensation, were among the earliest vapor control technologies to be utilized in the terminal industry for the control of vapors generated by product transfer operations. The theory of operation of lean oil absorption is relatively uncomplicated. The lean oil is forced to make intimate ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Recovery Technologies Product line

  • ESI - Model CPI - Corrugated Plate Interceptors

    The ESI CPI is designed and engineered for oil recovery applications where energy usage and equipment costs are a determining factor. The CPI is a gravity separator where efficiency is determined by the rising velocity of the smallest particles that will be intercepted, usually greater than 50 microns. The plate pack is made of many closely spaced ...

    By Energy Specialties International (ESI) based in Houston, TEXAS (USA). from Primary Treatment Product line

  • OPEC - Model HV - Low Capacity Oil Skimmer

    The HV System has been developed from the present well established and proven mop systems which are in operation worldwide. The equipment is simple and quick to set up and the installation of the system is also very simple. Mop changes are also very quick and easy to carry out and ready joined continuous loops of mop can easily be threaded between ...

    By Oil Pollution Environmental Control Ltd based in Batley, UNITED KINGDOM. from Oil Pollution Recovery Product line

  • Koseq - Model MCPS - Modular Crane Pedestal System

    When a large offshore oil spill occurs it is important to respond immediately. Dedicated oil spill response vessels (OSRV) like the once fitted with Rigid Sweeping Arms and its handling cranes are not often directly available, therefore, temporary vessels of opportunity (VOO) have to be prepared instead. The MCPS offers the oil spill responder a ...

    By Kampers Oil Spill Equipment (KOSEQ) BV based in Ridderkerk, NETHERLANDS. from Modular Systems Product line

  • Model ECO Series - Air Cleaners System

    It is suitable for suction and purification of oil mist, fume and dust produced during wet and dry machining processes. The filtration by coalescence is assured by a double and diversified pocket filter, with wide filtering surface for purifying particles of different sizes. Thanks to its modularity, it’s possible to equip the Series with ...

    By AR Filtrazioni SRL based in Bergamo, ITALY. from ECO Series Product line

  • Lamor - Rapid Boom Recovery Unit

    The Rapid Boom Recovery Unit is an innovative ancillary device designed to recover foam filled oil boom (FOB) at a high recovery rate . The recovery unit utilizes a hydraulic driven recovery system and pressurized guiding rails to recover deployed boom onto a vessel or a work platform. The rate of recovery is adjusted to the speed of the operation ...

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Oil Spill Response Products - Ancillary Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you