oil-water separator Equipment

4052 Results found
Only show results in Virginia?
OK
  • Keyword: oil-water separator ×

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

AWAS - Model HI 1999 - Freestanding Oil-Water Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Universal separator with less than 5mg/l final oil content made of stainless steel EN 1.4301/ AISI 304 for free standing installation, in a building or buried tanks. The design permits to have water inlet and outlet either in front or at the side walls. LGA Bayern tested acc. to EN 858 class I with less than 5 mg/l final oil content.

HQI - Hopper Oil Water Separators

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

Hydro Quip's Hopper Oil Water Separators are above-ground units designed for the separation of free and dispersed (non-emulsified) oil and settleable solids. Settleable solids and DNAPL are collected in the hopper chamber for removal. For pumping to downstream treatment, a model design with Effluent Pump Out Chamber is available.

CSI - Aboveground Oil/Water Separators

by Containment Solutions, Inc., (CSI)     based in Conroe, TEXAS (USA)

When it comes to your needs for an Oil/Water Separator, every application can be different. That’s why Containment Solutions considers your specific application to ensure that only the right system will be specified for your job. Oil/Water Separators from Containment Solutions, Inc. (CSI) are designed to separate free oils and settleable ...

Arjay - Model 4100-OWS - Oil/Water Separator Level Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

This unique oil level system provides complete flexibility for monitoring oil water separators in one complete package. The 4100-OWS sensing probe monitors the capacitance field between the probe and the concentric shield. As the oil accumulates and displaces the water, the probe capacitance changes. This interface signal is used to provide ...

HQI - Above Ground Oil Water Separator

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

For the effective separation of free and dispersed (non-emulsified) oil and settleable solids. Hydro Quip, Inc offers a complete line of Above Ground Rectangular Oil Water Separators that can be customized for your specific application. All our equipment meets or exceeds API 421 guidelines. The type of material and the type of media are always ...

Arjay - Model 2852-OWS - Oil/Water Separator & Sump Alarm

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down toward ...

HQI - Below Ground Oil Water Separators

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

Hydro Quip’s Below Ground Oil Water Separators stand out from the competition because we base our design on a Reynolds Number of less than 500. Design standard API 421 only references Stokes Law and does not address the importance of a Reynolds Number. Since Stokes Law is based on zero velocity, a low Reynolds number is required to ...

AWAS - Model Galaxie 1902 / 2002 - Oil-Water Vortex Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated plates - ...

CSI - Model 10 - Fiberglass Underground Oil/Water Separators (OWS)

by Containment Solutions, Inc., (CSI)     based in Conroe, TEXAS (USA)

Our performance-proven fiberglass underground storage tank provides the base for our fiberglass underground oil/water separators. Specifically designed to remove hydrocarbons with a specific gravity between 0.68 and 0.95, The CSI-10 model is design-tested and performance-rated. The model number (CSI-10) indicates an effluent quality of (10) parts ...

CSI - Model UL 2215 - Fiberglass Underground Oil/Water Separators (OWS)

by Containment Solutions, Inc., (CSI)     based in Conroe, TEXAS (USA)

The UL 2215 model is a premium performance oil/water separator. The UL 2215 model meets not only basic construction requirements for the holding vessel but has undergone PERFORMANCE TESTING of the actual OWS product line under simulated operating conditions. Our UL model takes separators to a new performance level. The systems are designed for ...

CSI - Model 15 - Fiberglass Underground Oil/Water Separators (OWS)

by Containment Solutions, Inc., (CSI)     based in Conroe, TEXAS (USA)

Our performance-proven fiberglass underground storage tank provides the base for our fiberglass underground oil/water separators. Specifically designed to remove hydrocarbons with a specific gravity between 0.68 and 0.95, the CSI-15 model is design-tested and performance-rated. The model number (CSI-15) indicates an effluent quality of (15) parts ...

MPPE & TiPSS - Model CPI - Corrugated Plate Interceptor for Oil-Water Separation

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The CPI is the basic TiPSS unit mainly used for oil-water separation. The CPI holds modular-counter-current-flow plate packs executed in GRP or Stainless Steel. The CPI basin can be executed in concrete or steel. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The ...

Model pCPI - Pressurized Cross Flow Interceptor for Oil-Water Separation

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The TiPPS CPI Pressurized is applied when the oil (or any non water miscible organic fluid) and solids contaminated feed water is pressurised or a fully contained plate pack is required (offshore).

CSI - Electronics For CSI Oil/Water Separator Monitoring And Control Systems

by Containment Solutions, Inc., (CSI)     based in Conroe, TEXAS (USA)

Electronics for CSI Oil/Water Separator monitoring and control systems can be configured to satisfy a wide range of customer requirements. Control panels, sensors, probes and gauges are available for all double-wall, single-wall oil/water separator systems as well as for single-tank or multiple-tank installations.

HQI - High Efficient Oil Water Clarification Separator

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

The HQI Clarification Separator is a horizontal gravity flow treatment system designed to separate settleable solids (specific gravity greater than water), suspended solids (specific gravity the same as water), and free and dispersed (non-emulsified) oil. The Clarification Separator is recommended for any application that has a high concentration ...

Enprotec - Coalescing Oil/Water Separators

by PAPSCO, Inc.     based in Cleveland, OHIO (USA)

Separation of 2 immiscible fluids using coalescing filter media.

Oil / Water Separator

by Flo Trend® Systems, Inc.     based in Houston, TEXAS (USA)

The Flo Trend® Systems' Phase 3 Oil / Water Separator uses coalescing tubes for the optimum separation of oil from water. A series of baffles and weirs in the vessel reduces turbulent flow and promotes laminar even flow through the vessel.

Need help finding the right suppliers?

Let the XPRTs do the work for you