Oxygen Analyzer Equipment Near Syria
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Liquiline CM444 is a digital multiparameter transmitter for process monitoring and controlling in any application. Modules can be added at any time to fit your process. The 4-channel controller saves you time and money by offering seamless system integration, simple operation and a reduced need for spare part stock. LiquilineCM444 provides you with all the benefits of a best-in-class transmitter ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flexible multiparameter field device for all industries. Liquiline CM448 is a digital multiparameter transmitter for process monitoring and controlling in any application. The 8-channel controller saves you time and money by offering seamless system integration, simple operation and a reduced need for spare part stock. Adapt the controller exactly to your measuring task and connect 1 to 8 sensors ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Holder for in-situ measurement in water, wastewater and utilities. The Flexdip CYH112 holder is a modular system for sensors and assemblies in open basins, channels, or tanks. It allows nearly any kind of fixing, such as floor, wall, and rail mounting. Moreover, it is suitable for all types of sensor installation – chain, fixed, or free-swinging. The holder can be expanded or modified at ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The Series 100 Trace N2 Gas Analyser has been developed to allow for the continuous monitoring of N2 in Argon or N2 in Helium. This specific detector has been derived from our extremely successful High Frequency Argon Discharge Detector ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
To measure % Oxygen (O) in Welding Gas Applications. Lightweight and portable handheld analyser that gives a fast and accurate Oxygen (O) sample measurement in the welding zone where typically Argon has been used to purge oxygen levels. With one touch of a button, the Veri-GAS O atmosphere for oxygen levels by placing the sample ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The AGC Microx MIC 7 is a low cost, high quality Oxygen Analyser for % or ppm levels. The compact and rugged design is ideal for integration into your process line with wall, din rail and panel mounting options. The long life Zirconia sensor is accompanied by a control unit which enables a fast response time of just 10 seconds with a ...
-
Manufactured by AMETEK MOCONbased in USA
Are you always getting the right blend of gas? Did you know that your bottom line becomes as invisible as the gas you are using if you supply the wrong gas mix to you processes?. Dansensor has designed the MAP Check 3 Pressure gas analyzer to ensure that you are always getting the right blend of ...
-
Manufactured by Modcon Systems LTD.based in UNITED KINGDOM
MOD-1040 Oxygen Analyzer is designed to provide accurate and reliable measurements of oxygen levels in high-pressure pipeline, making it ideal for a range of industrial applications. With its advanced optical sensor technology and rugged construction, MOD-1040 delivers precise measurements even in the harshest of conditions. Its ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Measures the hydrogen concentration in a gas sample and then digitally reports the percent volume of hydrogen in air. The 120HD analyzer functions as a katharometer. It operates by having two parallel tubes that both contain gas and heating coils. The gases are examined by comparing the rate of loss of heat from the heating coils into the ...
-
Manufactured by MANTECH Inc.based in CANADA
The Benchtop L50 PeCOD COD Analyzer is MANTECH’s base model for use in industrial, municipal or government and academic lab ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
A trace oxygen analyzer offering superior protection for a range of industrial applications through a rapid response to process changes. With a modular design for easy upgrades and field service, the TM2000 can accurately respond from atmosphere to low parts per million (ppm) in just seconds, serving a wide measurement range from 0.1 ppm to ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Building on the legacy of performance and high reliability of its predecessor, the WDG-V UOP/RP was designed in conjunction with UOP Continuous Catalyst Regeneration (CCR) process requirements for low-level oxygen (O2) measurement during the regeneration cycle in which coke deposits are removed from the catalyst by ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of ...
-
Manufactured by MANTECH Inc.based in CANADA
The world’s fastest method for chemical oxygen demand (COD) analysis is also available in a portable field unit. Just add the battery and carrying case and COD can be measured in the field without the need to transport toxic or hazardous ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Completely field serviceable, the WDG Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer probe design enables the removal of cell, heater and thermocouple assembly through the probe head. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you