oxygen gas detection Equipment available in Mauritius

Available in Mauritius| Near Mauritius
224 Results found

We couldn't find any oxygen gas detection equipment in Mauritius

Here is a list of results available in Mauritius

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: oxygen gas detection ×

  • Available in: Africa ×

  • Available in: Mauritius ×

GPro - Model 500 - Oxygen Gas Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The GPro 500 Oxygen TDL is a unique analyzer that fits anywhere in your process thanks to the broadest range of in situ and on-line process adaptions.

Environmental Sensors - Model Z-1100 - Hand Held Oxygen Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Meter is a hand held instrument that measures concentration in a range of ppm and a resolution of ppm. The instrument makes it possible to monitor vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an audible alarm that can be set at any level from ppm. With the ...

ACME - Model UN-ECH Series - Uniset Stand-Alone Gas Monitor

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

UNISET is a single-point stand-alone gas monitor for a number of toxic and flammable gases as well as oxygen deficiency. It utilizes state-of-the art sensor technology: electrochemical for toxic gases and oxygen; catalytic bead for combustibles. The UNISET has up to four SPDT relay outputs fully user-configurable to operate at different thresholds ...

ACME - Model CEL(LS) Series - MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME CEL(LS) MultiSet series is a microprocessor-based multipoint multigas detection and control system that can be used with a wide variety of toxic, combustible, refrigerant & oxygen gas sensors. The sensors can be grouped in any combination. The wiring between the Control Panel and the remote sensor-transmitters is accomplished via ...

ACME - Model CEL4 Series - Multi-gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME CEL4 Series is a microprocessor-based up to 4 channel multi-gas detection and control system that can be used with a wide variety of ACME toxic, combustible & oxygen gas sensors. The sensors can be grouped in any combination. The wiring between the Control Panel and the remote sensors is accomplished by a 4-wire ...

ACME - Model CEW(LS) Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Scalable system using Wireless Sensor-Transmitters communicating with a central Control Panel as well as Remote Wireless Relay Modules to operate ventilation equipment & Remote Alarms. FCC/IC/ETSI/CE approved RF modules for up to 256 remote sensor-transmitters & up to 96 Remote Relay Modules.- Minimal installation cost - virtually no field ...

ACME - Model CEL Series - Multi-gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEL Series centralized detection and control system can monitor up to 32 remote detectors via a 4-wire RS-485 daisy-chain communication link, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, ...

ACME - Model CEW4 Series - Wireless Multiset Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW4Quadset system monitors up to 4 remote sensors wirelessly over a 900MHz or 2.4GHz network. This results in substantial savings in labor and material costs during installation. While typically used for enclosed parking facilities where CO and NO2 (for Diesel fumes) are the gases detected, the CEW4 can monitor other toxic gases such as ...

ACME - Model CEW Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW Series centralized detection and control system can monitor up to 32 remote detectors via a wireless RS-485 communication link at 900MHz or 2.4GHz, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, ...

Systech - Model EC92DIS - Intrinsically Safe Portable Oxygen Analyzer

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

Portable oxygen analyzer used to measure oxygen levels suitable for hazardous environments. The EC92DIS portable oxygen analyzer can be used in hazardous areas - approved for II 1G Ex ia IIc Ga T4 - Zone 0 (ATEX). It is designed to measure oxygen levels and can detect oxygen levels as low as 1ppm, up to high percent oxygen levels and can be used ...

NEO Monitors - Model LaserGas™ III SP - Single Path Analyser for Oxygen

by NEO Monitors AS     based in Skedsmokorset, NORWAY

LaserGas III Single Path analyser for oxygen is designed for service in hazardous areas. Based on our third generation LaserGas electronics, the entire instrument is built into compact flameproof enclosures, making it operative in zone 1 and class l division 1 areas. The LaserGas III SP is our most reliable gas sensor with all electronics designed ...

Systech - Model ZR800 - Oxygen Analyzer

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

The ZR800 offers accurate, reliable and flexible oxygen analysis under the most demanding on-line operating conditions. Systech Illinois’ ZR800 oxygen analyzers are capable of measuring from 0.1ppm up to 100% oxygen in most industrial gas streams. With a response time and accuracy unparalleled in the industry, the ZR800 has found wide ...

Model GAS 820 - Fixed Gas Detectors

by Gas Alarm Systems Ltd     based in Knaresborough, UNITED KINGDOM

GAS 820 - Fixed Gas Detectors for Oxygen, Toxic and Flammable Gas The GAS 820 family of fixed gas detector transmitters have been designed to meet the varied requirements of all industries.

Systech - Model EC91 - Intrinsically Safe Oxygen Analyzer

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

ATEX-approved oxygen analyzer; Intrinsically safe ATEX-approved EC91 is an unsurpassed oxygen analyzer for all hazardous areas. The EC91 Intrinsically safe oxygen analyzer is an online transmitter for ppm and percent oxygen measurements of gas streams in hazardous area installations. It can detect oxygen levels from as low as 1 ppm up to higher ...

Systech - Model 8500/9500 - Oxygen and Nitrogen Control System

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

Save up to 50% in nitrogen running costs with the Nitrosave oxygen control system. The oxygen and nitrogen control system 8500/9500 monitors and adjusts atmospheres in soldering machines and heat treatment furnaces, saving nitrogen, cutting costs and improving process control.

INNOVA 1316 - Multi-Gas Monitor

by LumaSense Technologies, Inc.     based in Santa Clara, CALIFORNIA (USA)

The Multi Gas Monitor INNOVA 1316 is the first in a new family of gas analysis instruments for use in a wide variety of industrial applications. The instrument provides an affordable, highly reliable, and very accurate multi-gas solution that can be used in numerous applications e.g.: Fermentation Monitoring, Refrigerant Leak Detection, Landfill ...

TAPI - Model T108U - Ultra-Sensitive Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108U Total Sulfur analyzer is designed to measure ultra-low levels of mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2

TAPI - Model T802 - Paramagnetic O2Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T802 O2 uses the proven paramagnetic measurement principle, coupled with state of the art microprocessor technology, to provide accurate and dependable measurements of Percent-Level O2.

TAPI - Model T108 - Total Sulfur Analyzer

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model T108 Total Sulfur analyzer is designed to measure mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2.

Model CTX 300 - Oxygen Detector

by Oldham Gas     based in Arras Cedex, FRANCE

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 can satisfy the most demanding safety requirements. Designed to detect toxic gases, oxygen and refrigerant gases, the CTX 300 uses a new sensor for CO2 detection over three different ranges 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 ...

Related Terms for oxygen gas detection

Need help finding the right suppliers?

Let the XPRTs do the work for you