Oxygen Gas Monitoring Equipment Near Poland
-
Manufactured by Setnagbased in FRANCE
Measurement of oxygen in combustion gases (specially dedicated to natural gas ...
-
Manufactured by Setnagbased in FRANCE
Can withstand corrosive chemicals and high moisture rate. Limited maintenance requirements, owing to the laser diode with automatic drift control. 2 versions available: for safe areas and for Ex Proof ...
-
Manufactured by Setnagbased in FRANCE
MEASUREMENT OF OXYGEN IN COMBUSTION GASES AND IN INCINERATION GASES. QAL1 COMPLIANT (EN14181). ADVANTAGES: No need for reference gas: use of the MicroPoas. Maximum gas temperature: up to 1300° C continuously, depending on the version. No sensitive parts and no hot spot inside the duct. Free circulation of the gases you analyse. ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
By means of the gas analyser MGA 23 up to 4 gas components can be measured at the same time: maximum 3 infrared-active gases as e.g. CO, CO2, NO, SO2, CH4, R22 (Frigen CHCIF2) as well as O2 with an electrochemical measuring cell. Basic versions of the MGA 23 for: 1 Infrared-gas component with/without oxygen measurement. 2 ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
To measure % Oxygen (O) in Welding Gas Applications. Lightweight and portable handheld analyser that gives a fast and accurate Oxygen (O) sample measurement in the welding zone where typically Argon has been used to purge oxygen levels. With one touch of a button, the Veri-GAS O atmosphere for ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Intrinsically safe ATEX-approved EC91 is an unsurpassed oxygen analyzer for all hazardous areas. The EC91 intrinsically safe oxygen analyzer is an online transmitter for ppm and percent oxygen measurements of gas streams in hazardous area installations. It can detect oxygen levels from as low as 1 ppm up to ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
The ultimate solution for fast and reliable oxygen permeation testing of multiple bottles, packages or films. The 8700 with fixed platens is ideal for rapid permeation testing of multiple bottles in PET bottle manufacturing and as an invaluable R&D resource in laboratories for development work to test and validate new packages. In ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
The 8501 offers a cost-effective solution for accurate, reliable measurement of oxygen transmission rate (OTR) through permeable films. Laboratory quality analysis of packaging film barriers in a simple to use benchtop system. This precision oxygen permeation analyzer combines trace oxygen sensitivity, dependability and exceptional ease of ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Simple, cost effective oxygen permeation testing for packages and bottles. Ideal for oxygen permeation testing of containers, canisters, pouches, bags, closures and more. This two station analyzer is the economical solution. It incorporates the reliability and wide measurement range of our leading permeation instruments but is designed to be ...
-
Manufactured by Industrial Physics Product Integrity Limitedbased in UNITED KINGDOM
Modular systems for precision oxygen analysis of packaging film barriers. The 8001 is a versatile and easy to operate oxygen permeation analyzer with 2 stations for testing films or packages. Offering the highest quality coulometric oxygen sensor in the market with the lowest replacement cost, this instrument provides extremely fast purge ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The solvent-resistant oxygen sensor measures oxygen partial pressure in most polar and nonpolar solvents (except fluorinated and some chlorinated hydrocarbons). Short-term applications up to 60 min in pure organic solvents and their mixtures are possible. A list of tested and compatible solvents is included in the data sheet, which is ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This fiber-optic minisensor consist of an optical fiber with a sensor tip ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This fiber-optic minisensor consist of an optical fiber with a sensor tip ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The fiber-optic oxygen sensors from PyroScience feature no oxygen consumption, no stirring sensitivity, an extremely long shelf time, resistance to corrosive environments (e.g. seawater) and are suitable for multiple applications in gas, water and aqueous samples. This robust oxygen probe is based on optical detection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you