oxygen probe Equipment available in Kansas

Available in Kansas| Near Kansas
285 Results found

We couldn't find any oxygen probe equipment in Kansas

Here is a list of results available in Kansas

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: oxygen probe ×

  • Available in: USA ×

  • Available in: Kansas ×

Model DO4000 - Dissolved Oxygen Probe

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Series DO4000 sensor, in conjunction with the MicroChem®2[S4] Series 4000 transmitter is a simple and reliable Dissolved Oxygen measuring system. The immersion probes are designed for direct insertion into tanks, open channels and basins. A flow-through cell version allows measurements in continuous non-pressurized sampling systems.

OxyGuard - Model DO - Oxygen Probe

by OxyGuard International A/S     based in Farum, DENMARK

The OxyGuard Standard Probe – the probe that revolutionised oxygen monitoring. The probe that you can purchase today is even better than the probe introduced in 1987 that helped revolutionize fish farming and make modern aquaculture the industry it is today.Today’s OxyGuard Standard Probe is hermetically sealed. If needed you can open ...

Model OP-2 - Oxygen Probe

by PP Systems     based in Amesbury, MASSACHUSETTS (USA)

For use with our range of CO2 infrared gas analyzers. For over 25 years, PP Systems has been manufacturing high quality strumentation and environmental sensors for researchers worldwide.

NOVATECH - Model 1230 Series - Oxygen Probes Analyzers

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

The 1231 and 1232 O2 probes are highly accurate, very durable, and have negligible drift. Choose the 1231 for analyzing process gases with temperatures below 900C and the 1232 for process gases with temperatures ranging from 700C to 1400C.

Needle Oxygen Probes

by Fluorometrics Instruments, LLC (FMI)     based in Tarpon Springs, FLORIDA (USA)

Our new needle oxygen probes are an industry first. These unique oxygen probes are ideal for measuring headspace in packaging and more. Available in two different configurations, our needle oxygen probes provide unsurpassed accuracy and ease of use for a variety of applications.

OxyGuard - Model 420 - Membrane Covered Galvanic Oxygen Probe

by OxyGuard International A/S     based in Farum, DENMARK

The Model 420 is a membrane covered galvanic oxygen probe with built-in two-wire 4-20 mA transmitter. The probe is connected to a DC supply and draws a current of between 4 and 20 mA corresponding to the oxygen concentration. There are only two wires to connect, and there is no limit to cable length. The output signal ...

Model 20PI - Dissolved Oxygen Probe (M-20PI)

by Insite Instrumentation Group, Inc     based in Slidell, LOUISIANA (USA)

The M-20PI Sensor is intended for inline monitoring in a large diameter pipe. The mount is 2' NPT male thread in 316 stainless steel that works with a customer supplied 2' Thread-O-Let. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the back of the sensor mount that should be parallel ...

Model 20 - Dissolved Oxygen Probe (M-20)

by Insite Instrumentation Group, Inc     based in Slidell, LOUISIANA (USA)

The M-20 Sensor is our standard fluorescence dissolved oxygen sensor configuration. This includes the 1-1/2' NPT male mounting thread, 1/4' quick connect tube fitting for the integrated jet clean, and 33ft (10m) of sensor communications cable. Additional cable length is available upon request.

Model 20HT - Dissolved Oxygen Probe (M-20HT)

by Insite Instrumentation Group, Inc     based in Slidell, LOUISIANA (USA)

The M-20HT Sensor combines the ease of use of a hot tap mount with the reliability of the InsiteIG DO Sensor. The mount is a 2' NPT male thread in 316 stainless steel that works with a customer supplied 2' Thread-O-Let, saddle or existing piping. The integrated jet clean includes an inline check valve.

Model 20T - Dissolved Oxygen Probe (M-20T)

by Insite Instrumentation Group, Inc     based in Slidell, LOUISIANA (USA)

The M-20T Sensor is intended for inline dissolved oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is 3' schedule 80 PVC, with slip connections. The integrated jet clean with this sensor includes an inline check ...

CS511-L Dissolved Oxygen Probe

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The CS511 is a rugged, low-maintenance sensor that is manufactured by Sensorex. It consists of a self-polarizing galvanic cell that generates a millivolt signal proportional to the amount of oxygen present in the measured medium (typically water). Oxygen diffuses through its membrane onto a cathode that produces a chemical reaction. An electrical ...

Jenway - Dissolved Oxygen (DO2) Probes

by Bibby Scientific Limited     based in Stone, UNITED KINGDOM

Jenway have an extensive range of dissolved oxygen probes suitable for portable or bench dissolved oxygen meters. The probes for the dissolved oxygen meters have all been updated in order to unify the range.

Fiber Optic Oxygen Sensor Probe Options

by Ocean Optics - a Halma Company     based in Dunedin, FLORIDA (USA)

Fiber Optic Oxygen Sensors are spectrometer-coupled chemical sensors for full spectral analysis of dissolved and gaseous oxygen pressure. Fiber Optic Oxygen Sensors are designed for use with our modular components. First select a Sensor Coating Formulation. Then select a Fiber Optic Probe onto which the sensor coating will be applied. You select ...

THERMOX - Model WDG Insitu Probe - Smart Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The Need: Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides ...

Model LBOD101 - IntelliCAL Luminescent Dissolved Oxygen Probe (LDO) for BOD Measurement

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

The LBOD101 probe is the latest embodiment of Hach's patented Luminescent Dissolved Oxygen (LDO®) technology. The LDO technology is now available with an integrated stirrer for use in BOD5 testing applications. The LBOD101 probe is used for initial and final dissolved oxygen measurements, which leverages the LDO technology to eliminate many ...

Model LDO101 - IntelliCAL Rugged Dissolved Oxygen Probe, 30 Meter Cable

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

IntelliCAL(TM) Rugged Probes can reliably test in harsh environmental conditions. Move probes between meters without the need to re-calibrate. Super tough, stainless steel body and polymer sensor shroud. Reinforced, steel sheathed cables-durable yet manageable. Waterproof to 30 meters for 24 hours (IP68). Unbreakable, locking ...

Model LDO101 - IntelliCAL Rugged Dissolved Oxygen Probe, 15 Meter Cable

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

IntelliCAL(TM) Rugged Probes can reliably test in harsh environmental conditions. Move probes between meters without the need to re-calibrate. Super tough, stainless steel body and polymer sensor shroud. Reinforced, steel sheathed cables-durable yet manageable. Waterproof to 30 meters for 24 hours (IP68). Unbreakable, locking ...

Model LBOD101 - IntelliCAL Luminescent Dissolved Oxygen Probe (LDO) for BOD Measurement

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

The LBOD101 probe is the latest embodiment of Hach's patented Luminescent Dissolved Oxygen (LDO®) technology. The LDO technology is now available with an integrated stirrer for use in BOD5 testing applications. The LBOD101 probe is used for initial and final dissolved oxygen measurements, which leverages the LDO technology to eliminate many ...

Model LDO101 - IntelliCAL Standard Dissolved Oxygen Probe, 1 Meter Cable

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

IntelliCAL(TM) Standard Probes are accurate, pre-calibrated, and reliable. Move probes between meters without the need to re-calibrate. Track performance with calibration history. Probe alerts when re-calibration is needed. Ultimate trackability-easily obtain:. Time and Date stamp. Operator and Sample ID. Calibration history. Parameter. Reading. ...

Model LDO101 - IntelliCAL Rugged Dissolved Oxygen Probe, 10 Meter Cable

by Hach Company - a subsidiary of Danaher Corporation     based in Loveland, COLORADO (USA)

IntelliCAL(TM) Rugged Probes can reliably test in harsh environmental conditions. Move probes between meters without the need to re-calibrate. Super tough, stainless steel body and polymer sensor shroud. Reinforced, steel sheathed cables-durable yet manageable. Waterproof to 30 meters for 24 hours (IP68). Unbreakable, locking ...

Need help finding the right suppliers?

Let the XPRTs do the work for you