Excellent response time, thanks to the MicroPoas® miniaturized zirconia sensor. Increased reliability and easy set-up as no reference gas is required. The excellent measurement reproducibility ensures perfect control of your process.
Designed for laboratories that run BOD and other parameters, such as pH, alkalinity, turbidity, conductivity and chemical oxygen demand (COD). Users can easily switch between BOD and other parameters by simply changing the rack and the probe.
Large BOD autosampler with 54, 72 or 90 place capacity; Automates the 5-day and 7-day BOD standard analysis methods. Follows Standard Methods and ISO Methods. Use glass or plastic 300 mL or glass 60 mL BOD bottles. Analyze BOD and CBOD in the same run. Automates up to five pumps for rinsing, dilution water, seed, spike, and inhibitor/ATU, ...
The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas environments.
Soil gas analysis can yield a lot of information concerning the soil environment. Using a ‘piercing probe’ and an oxygen content meter the growing conditions for shrubs and trees can be defined. And who would not want to be able to measure the extent of soil pollution in an area without timeconsuming soil drilling?
In plant cultivation it is very important that the soil has proper ventilation. The necessary oxygen supply for the roots and the discharge of the carbon dioxide gas that is formed there, in case of most cultivated growth, takes place via the soil. Also soil chemical processes depend on the presence of oxygen in the soil.
Membrane type polarography method. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor replacement.
Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor replacement. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Extensive interfaces (2-channel transmission output, RS-485 compatible, 4-relay output).
MEASUREMENT OF OXYGEN IN COMBUSTION GASES AND IN INCINERATION GASES. QAL1 COMPLIANT (EN14181). ADVANTAGES: No need for reference gas: use of the MicroPoas®. Maximum gas temperature: up to 1300° C continuously, depending on the version. No sensitive parts and no hot spot inside the duct. Free ci
Analyzer for chemical oxygen demand in environmental monitoring, industrial and municipal wastewater. Liquiline System CA80COD offers constant online measurement of the chemical oxygen demand (COD). It supports you in monitoring the cleaning capacity of wastewater treatment plants and enables load-based billing for industrial dischargers. ...
It is a dimensionally small, portable, measuring device which is very popular among users. This device is manufactured by solutions developed in EMIO. DFM 1197 flowmeter operation is based on the principle of micromanometric. differential pressure measurement, the flow meter is equipped with its own temperature probe and may be additionally ...
The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity.
For swimming pools with volumes up to 100 m3. Chlorine-free water treatment system for environmentally operated private pools. Safe water disinfection with active oxygen as a turnkey complete solution.
U-50 series Multi-parameter water quality checker enables to measure and indicate the monitoring result simultaneously up to 11 parameters with one unit. Tough & powerful design, considering user friendly field monitoring on site, such as rive, ground water, drainage water, etc. bring together feature of function and performance, which makes ...
This set contains, among other things: a stainless steel bailer sampler, sample bottles, a water level measuring device, a dissolved oxygen meter, a pHmeter, and a water quality test kit with EC-meter.
Electronic transmitter / controller for the measurement of dissolved oxygen in high purity water. Sensor connections for Oxytrace G oxygen sensor with integrated NT5k temperature probe and for a digital sample flow meter. Automatic compensation of temperature and air pressure.
Electronic transmitter & controller for the measurement of the dissolved oxygen in potable water and effluents. Connections for a three-electrode oxygen sensor with integrated temperature probe, e.g. Swansensor Oxysafe1000 and for a SWAN digital sample flow meter. Temperature and air pressure compensation.
Automatic dust meter EMIOTEST 3114, in its innovative technical solution, is a portable device designed to perform, in closed channels, periodic measurements of dust concentration in the flue gases and a dust mass stream (eg. in the exhaust) to define the emission of dust into the atmosphere. The measurement method is based on the isokinetic ...