oxygen sensor Equipment available in São Tomé & Príncipe

Available in São Tomé & Príncipe| Near São Tomé & Príncipe
685 Results found

We couldn't find any oxygen sensor equipment in São Tomé & Príncipe

Here is a list of results available in São Tomé & Príncipe

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: oxygen sensor ×

  • Available in: Africa ×

  • Available in: São Tomé & Príncipe ×

InPro - Model 6900i G - Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro 6900i G combines high measurement performance with the latest capabilities of the ISM technology. Designed for best performance at the ppm level, they are easy to maintain and allow for high operational availability.

InPro - Model 6850i - Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro6850i as intelligent all-rounder uses the new 3-electrode system. A separate platinum anode increases the signal stability especially in to low oxygen level.

InPro - Model 6970i - Trace Optical Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The new InPro6970i designed for brewery application sets a new standard for operational availability and measurement quality of your oxygen loop especially in the filler line. The optical oxygen sensors are easy and fast to maintain, leading to enhanced process safety and low cost of ownership. Reduced signal drift and faster response time ...

InPro - Model 6800 - Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO's 'Advanced Line' dissolved oxygen sensors are specifically designed for reliable in-line measurement in processes under sterile, hygienic conditions. InPro6800 sensors have been developed and manufactured in accordance with the most precise surface treatment standards to comply fully with EHEDG and FDA flat-surface recommendations ...

InPro - Model 6900(i) - Trace Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro6900i is the intelligent counterpart for the InPro6900, the proven standard especially in food and beverage applications for low oxygen concentrations. The special electrode design with guard ring around the cathode together with the larger surface of the cathode allows for measurement down to 1ppb dissolved oxygen.

InPro - Model 6850i G - Amperometric Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro 6850i G as intelligent all-rounder uses the new 3-electrode system. A separate platinum anode increases the signal stability for extended maintenance intervals. These sensors can be installed in harsh environments and hazardous area applications. With the integrated ISM technology, they monitor themselves for wear and ...

InPro - Model 6800 G - Amperometric Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s line of amperometric gas-phase oxygen sensors are well suited for a wide measurement range in a broad choice of applications. These in-line sensors provide excellent performance with minimum maintenance and do not require any gas sampling and pre-conditioning systems.

High Purity Dissolved Oxygen Sensors

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The high-performance DO sensor provides especially high accuracy and fast down-scale response and is used for most applications. The long life sensor can operate several years without any internal maintenance and is not affected by dissolved hydrogen. It is used primarily in stator cooling and nuclear power plant applications. The sensors for M800 ...

GPro - Model 500 - Oxygen Gas Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The GPro 500 Oxygen TDL is a unique analyzer that fits anywhere in your process thanks to the broadest range of in situ and on-line process adaptions.

Digital Optical IDS Dissolved Oxygen Sensors

by WTW - a xylem brand     based in Weilheim, GERMANY

FDO 925 – optical oxygen sensors for applications in the lab and process, field and wastewater treatment systems - low-maintenance and quick.

TAPI - Model 465L + O2 - Industrial Hygiene Ozone Analyzer with Oxygen Sensor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 465L UV Photometric Ozone Monitor is an extremely stable analyzer, ideal for critical low-level ppm safety and process applications.  Its calibration is NIST traceable and the included pressure and temperature compensation ensure high accuracy under all conditions.  An integral micro fuel cell sensor provides accurate, ...

Oxymax - Model COS51D - Digital Oxygen Sensor

by Endress+Hauser     based in Reinach, SWITZERLAND

Memosens amperometric oxygen sensor for water, wastewater and utilities. Oxymax COS51D is a reliable and highly accurate oxygen sensor for all kinds of water & wastewater applications (including hazardous areas). Designed to be low-maintenance with a long operating life, the sensor offers outstanding value for money. Thanks to Memosens digital ...

Oxymax - Model COS22D - Digital Oxygen Sensor

by Endress+Hauser     based in Reinach, SWITZERLAND

The Oxymax COS22D safeguards your products, process and plant equipment from oxygen influences. It measures reliably over a wide range helping you to better monitor and control your applications. The sensor is low-maintenance and ensures long-term stability - even with frequent sterilization and autoclaving. Thanks to Memosens digital technology, ...

IC Controls - Model 825 - Quick-Union Dissolved Oxygen Sensor

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The model 825 D.O. sensor is accurate, self-cleaning, and rugged. The quick-union sensor is recommended for difficult applications which require frequent removal of the sensor for calibration, cleaning or Q.C. checks. The true-union-style threaded fitting locks in the D.O. sensor for extra safety and very easy removal. The model 825 is offered in ...

IC Controls - Model 814 - True-Union Dissolved Oxygen Sensor

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

The true-union sensor is recommended for applications where frequent removal in tough applications is required for calibration, cleaning or Q.C. checks. The true-union-style threaded fitting locks in the DO sensor for extra safety and very easy removal. The model 814 sensor is a downsized version of the model 825. The model 814 is offered in an ...

Environmental Sensors - Model Z-1100 - Hand Held Oxygen Monitor Meter

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Environmental Sensors Co.'s Meter is a hand held instrument that measures concentration in a range of ppm and a resolution of ppm. The instrument makes it possible to monitor vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an audible alarm that can be set at any level from ppm. With the ...

Flowfit - Model CYA251 - Universal Flow Assembly for Nitrate/SAC, Turbidity and Oxygen Sensors

by Endress+Hauser     based in Reinach, SWITZERLAND

Flowfit CYA251 is a flow assembly for nitrate/SAC, turbidity and oxygen sensors with a diameter of 40mm. It allows optimum adaption to your piping system thanks to numerous available process connections. The ruggedized material withstands even aggressive media and harsh environmental conditions and a back-pressure valve protects your ...

Novatech - Model 1234 Series - Oxygen Sensors

by Monitoring Solutions     based in Indianapolis, INDIANA (USA)

The 1234 O2 Sensors are ideal for: Flue Gas Analysis. Inert atmosphere measurements. Modified atmosphere packaging. Inert and sterile packaging. General industrial use. Scientific tasks.

Franatech - Oxygen Sensor

by Franatech Aquaculture Gmbh     based in Lüneburg, GERMANY

The D-Opto sensor is a rugged low power dissolved oxygen sensor.The low power consumption, and low sensor drift make the D-Opto an ideal choice for remote battery and solar powered installations.The D-Opto is available with either an SDI-12, 4-20mA or 0-5 volt signal output.The D-Opto features a rugged interface panel for simple connection to the ...

Pro - Dissolved Oxygen (DO) Portable

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Fast and precise optical dissolved oxygen determination in the lab or outdoors. Optimized for dissolved oxygen in the laboratory, at-line, or outdoors, the new Seven2Go Pro S9 portable is designed to provide users with fast quality data, one-handed operation and durability.

Need help finding the right suppliers?

Let the XPRTs do the work for you