Particle Filter Equipment Available In Solomon Islands
-
Manufactured by Sundström Safety ABbased in SWEDEN
SR 510 P3 R is a mechanical filter with extremely low inhalation resistance. SR 510 protect against all types of particles (dust, fume, fog, spray, asbestos), even bacteria, viruses and radioactive pollution. SR 510 also fits on all Sundström filterrespirator products. Combinations of filters can be used if gases/vapours and ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
micronAir particle filters provide effective protection against fine dust as well as pollen, road dust, wear debris, soot, bacteria, industrial dusts and other respirable fine particles. Exhaust gases from diesel vehicles contain fine dust and soot particles that are smaller than 2,5 micrometers. The mucous membranes of the ...
-
Manufactured by Blueair, Inc.based in USA
Designed specifically to fit the original Blueair Sense and new Blueair ...
-
Manufactured by Céramiques Techniques Industrielles (CTI)based in FRANCE
The product of six years research in collaboration with IFP (French Petroleum Institute), this patented filter marketed by CTI since 2006 is based on very different manufacturing technology and processes from those used in the filters previously available on the ...
-
Manufactured by Blueair, Inc.based in USA
Blueair air purifiers combine electrostatic and mechanical filtration, allowing filtration to perform at peak performance levels for longer periods of time. The two types of filtration expertly work together to trap particles from big to small. ...
-
Manufactured by Centrotherm Clean Solutions GmbH & Co. KGbased in GERMANY
The CT-PF particle filter is specifically designed for the semiconductor and photovoltaic industry in order to separate even the smallest particles from the exhaust gas flow. One typical application is the particle separation of SiO2 dust which is created during thermal treatment on CVD processes with very high silane ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Crafted for easy installation and strong protection, Advantage Respirator Cartridges use a bayonet-style design for easy mounting. With low-lug height and lead-in connectors, the cartridges lock into place with only a single ...
-
Manufactured by Scientific and Production Enterprise `Standart`based in UKRAINE
The FRPA P2 particle filter corresponds to efficiency class ?2. Nominal Protection Factor (NPF) – 12. Resistant to dust pollution. ...
-
Manufactured by Swagelok Companybased in USA
Safe Product Selection: The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system ...
-
Manufactured by 2B Technologiesbased in USA
Particle Filter Housing for 47-mm ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The filter element of the Ankersmid fluid particle filter is constructed in two sections with a flow direction from the inside to the outside of the filter element. The inner, very fine, fibre layer binds the fluid particles suspended in the gas and leads them together with the gas flow to the outer, larger ...
-
Manufactured by PURitech Gmbhbased in GERMANY
The DAS-DBS system is a combined regeneration filter system, comprising an active regeneration component (external fuel injection) and a passive component (catalytic filter coating or fuel borne catalyst). The filter system is designed for vehicles and machines operating often on a severe duty cycle (low exhaust gas temp.). It is ...
-
Manufactured by PURitech Gmbhbased in GERMANY
The DPFN+NC system is a self-cleaning wall-flow filter system utilising our exclusively developed passive regeneration technology. The 'self-regeneration' occurs through a patented catalytic coating of the pre-filter allowing us to take full benefit of a non-coated wall flow filter monolith. This innovation ensures the lowest cost ...
-
Manufactured by KINGFA Sci. & Tech., Co., Ltd.based in CHINA
This product's intended usage is within a general working environment. It is designed to provide reliable respiratory protection, filtration of certain airborne particles, and resistance against bodily ...
-
Manufactured by PURitech Gmbhbased in GERMANY
regeneration (exchange filter), the filter element has to be externally regenerated. If the filter module or exchange filter is loaded with soot, it has to be removed and regenerated in an external thermal regeneration unit. The unit increases the temperature according to a pre-programmed procedure up to 650C that converts all ...
-
Manufactured by Palas GmbHbased in GERMANY
PMFT 1000 F as an all-rounder in the testing of almost all mask and filter types. Test of total penetration better than the standard, exact analysis of filter mask efficiency from 145 nm to 5 ...
-
Manufactured by Kleenoil USA Incbased in USA
Micromag is used to remove ferrous or para-magnetic contamination from fluids. The unit is especially effective with machine tool oils and ...
-
Manufactured by BenchVentbased in UNITED KINGDOM
Art No: HE705P – EPA Particle Filter (includes 3x pre-filters). Pleated EU10 EPA particle filter for suspended particulates, particle size < 1 µm, including fine dusts and powders and solder fume particles. Filters classed as EU10 are used as final ...
-
Manufactured by Medisana GmbHbased in GERMANY
The importance of each individual's behaviour within the corona pandemic is immense. Everyone can contribute to preventing themselves from falling ill and at the same time protecting others. However, the prerequisite for this are effective and tested protective masks, especially for patients at risk. medisana has set up its own supply structures to offer you the high-quality FFP2 ...
-
Manufactured by Sundström Safety ABbased in SWEDEN
The SR 700 is a battery-powered fan that, together with particle filter SR 510 P3 R or SR 710 P3 R and an approved head top, is included in the Sundström fan-assisted respiratory protective device systems. The SR 700 can be used as an alternative to filter respirators in all situations in which these are recommended. This applies ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you