We couldn't find any particle sampling equipment suppliers or service providers located in Burundi
Here is a list of equipment results with suppliers serving Burundi
Particle Sampling Equipment Available In Burundi
-
Manufactured by SKCbased in USA
The AirChek® 52, 5 to 3000 ml/min, easy-to-use personal sample pump provides up to 12-hour run times for sampling particulates and gases/vapors. The pump is ideal for use with sorbent tubes, filter cassettes, size-selective samplers, and impingers. UL Listed for intrinsic ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Break-away design Cyclone (PM2-NT) shown with probe and pitot. The Kit does not include Pitot ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
Manufactured by PS Prozesstechnik GmbHbased in SWITZERLAND
Working principle XPT-CP: The powder sample is filled in a funnel. The vibrating feeder controlled by the image analysis software is dosing the powder through the analysis cell. The particles are falling through the focussing range of the CCD camera continuously taking images which are analysed and displayed online. Results are particle ...
-
Manufactured by Hal Technology, LLCbased in USA
The HAL-LPC230 features unique direct bottle sampling without risk of contaminating sampling fluid. ...
-
Manufactured by Dispersion Technology Inc.based in USA
Acoustic spectrometer, Particle size distribution in concentrated dispersions and emulsions. These two models have different sample handling systems. Model DT-100 allows sample agitation with a magnetic mixer or peristaltic pump. Minimum sample volume is 15 mL. Model DT-110 is suitable only for stable samples; it ...
-
Manufactured by PMT (GB) Limitedbased in UNITED KINGDOM
The KL-05 is a Light Obscuration Particle Counter for insoluble particulate matter test for injections according to USP, Ph.Eur2.9.19. and JP, 24 in injection solutions and Parenteralia. It combines the simplest configuration and operation with software integrated in the measuring system. This high-end PA counter enables the sampling of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
The nylon membrane is made of polyamide 66. It is hydrophilic in nature with good chemical compatibility. It can filter all water-based liquids and most organic solutions such as alcohols, hydrocarbons, ethers, esters, ketones, etc. The nylon membrane is widely used for sample collection, pre-filtration, sample testing and removal of ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With four simple tests, the MiniLab 153 delivers comprehensive on-site oil analysis, providing immediate actionable ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The particle-size distribution is one of the most important physical qualities of a soil. The division of soils (soil classification) is primarily based on particle-size distribution. When accurately determining the particle size in samples, in addition to the determination using sieves, other methods will need to be applied. A ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
particle sample concentration range, robust structure and possibility to characterize chemical composition of size classified particles after the real-time measurement. The latest addition to the HR-ELPI+ features is a new Data Analysis Tool software that makes data analysis and visualization fast and easy for the instrument operator. This new ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you