Particle Sampling Equipment
-
Manufactured by SKCbased in USA
The AirChek® 52, 5 to 3000 ml/min, easy-to-use personal sample pump provides up to 12-hour run times for sampling particulates and gases/vapors. The pump is ideal for use with sorbent tubes, filter cassettes, size-selective samplers, and impingers. UL Listed for intrinsic ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Break-away design Cyclone (PM2-NT) shown with probe and pitot. The Kit does not include Pitot ...
-
Manufactured by PS Prozesstechnik GmbHbased in SWITZERLAND
Working principle XPT-CP: The powder sample is filled in a funnel. The vibrating feeder controlled by the image analysis software is dosing the powder through the analysis cell. The particles are falling through the focussing range of the CCD camera continuously taking images which are analysed and displayed online. Results are particle ...
-
Manufactured by Hal Technology, LLCbased in USA
The HAL-LPC230 features unique direct bottle sampling without risk of contaminating sampling fluid. ...
-
Manufactured by Dispersion Technology Inc.based in USA
Acoustic spectrometer, Particle size distribution in concentrated dispersions and emulsions. These two models have different sample handling systems. Model DT-100 allows sample agitation with a magnetic mixer or peristaltic pump. Minimum sample volume is 15 mL. Model DT-110 is suitable only for stable samples; it ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm ...
-
Manufactured by PMT (GB) Limitedbased in UNITED KINGDOM
The KL-05 is a Light Obscuration Particle Counter for insoluble particulate matter test for injections according to USP, Ph.Eur2.9.19. and JP, 24 in injection solutions and Parenteralia. It combines the simplest configuration and operation with software integrated in the measuring system. This high-end PA counter enables the sampling of ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. It includes an in-line and an open-face version, both of which can be used with several successive stages of ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
The NILU filter holder system is designed for sampling of particles and gaseous compounds on impregnated filters in air pollution measurements. It includes an open face version, which can be used with several successive stages of filters. The aluminium version is designed to sample microplastics and other compounds sensitive to ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
particle sample concentration range, robust structure and possibility to characterize chemical composition of size classified particles after the real-time measurement. The latest addition to the HR-ELPI+ features is a new Data Analysis Tool software that makes data analysis and visualization fast and easy for the instrument operator. This new ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Oil analysis provides early indications of equipment wear and identifies the root causes of corrosion. On-site oil analysis eliminates the wait associated with sending samples off-site and enables immediate decision making. With four simple tests, the MiniLab 153 delivers comprehensive on-site oil analysis, providing immediate actionable ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Discover Eco IC, an ion chromatography system that focuses on the essentials while not compromising on quality, robustness, and reliability. Eco IC has been developed to enable more users to benefit from this technique. Whether you need to perform routine water analysis or you’re looking for an instrument for higher education, Eco IC comes with all the components you need. In addition, you ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you