Particle Sampling Equipment In Australasia
-
Manufactured by SKCbased in USA
The AirChek® 52, 5 to 3000 ml/min, easy-to-use personal sample pump provides up to 12-hour run times for sampling particulates and gases/vapors. The pump is ideal for use with sorbent tubes, filter cassettes, size-selective samplers, and impingers. UL Listed for intrinsic ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Break-away design Cyclone (PM2-NT) shown with probe and pitot. The Kit does not include Pitot ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The particle-size distribution is one of the most important physical qualities of a soil. The division of soils (soil classification) is primarily based on particle-size distribution. When accurately determining the particle size in samples, in addition to the determination using sieves, other methods will need to be applied. A ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
A sand ruler is a disc made of transparent material with standard (specimen) samples. It is an excellent indicative aid in determining the particle size distribution. Of the sample to be tested a representative part is rubbed dry with the fingers in the palm of the hand. The sample is then placed in the hollow area in the center ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
is fast because there is no delay time as sample is pumped through plastic tubing before reaching the ferrogram surface. The T2FM delivers the entire sample and all the particles contained therein onto the ferrogram surface. A crystal clear rinse is obtained without fail for every ferrogram. There are no last minute drips of oil ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
particle sample concentration range, robust structure and possibility to characterize chemical composition of size classified particles after the real-time measurement. The latest addition to the HR-ELPI+ features is a new Data Analysis Tool software that makes data analysis and visualization fast and easy for the instrument operator. This new ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you