Particulate Filter Equipment In Australasia
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The standard Anguil inlet filter plenum consists of stages of filtration to prevent particulates from entering your oxidizer and negatively affecting ...
-
Manufactured by 3Mbased in USA
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This ...
-
Manufactured by AirMetricsbased in USA
For particulate sampling, the MiniVol TAS uses 47mm filters to collect particulate matter. Filters should be weighed pre- and post-exposure with a microbalance accurate to one ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
Need analyser protection with a vengeance? Introducing the Avenger 90 Series filters: protecting your gas or hydrocarbon liquid analyser and rescuing sample integrity from contaminants with their super powered element. The Avenger Model 91 uses a disposable filter element to remove 100% of micron and sub-micron particulate suspended in a ...
-
Manufactured by 3Mbased in USA
The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
From the economical range for HVAC through to the High Performance range for tough conditions with extremely long life, there is a pocket filter for every application. Available in a range of designs with G4-F9 media [EN779:2012] / ISO Coarse – ePM1 [ISO 16890] which is being phased in from mid 2016 to replace all EN779 grades. ISO ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
Where your space is at a premium our range of cassette filters enables space saving. M5-E11 [EN779:2012] / ePM10- ePM1 [ISO 16890] grades ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
samples originate at the remote sampling head, which contains a high-efficiency particulate ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Glass Fiber Filters are most the commonly used filters for particulate sampling. All of the glass fiber filters are binder free and exhibit at least 99.95% efficiency for 0.3 μm dioctyl phthalate (DOP) smoke particles. 934AH is available. Not recommended for metals ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments SB-47 is a heated filter oven that uses a 47 mm glass fiber filter and is specifically designed for isokinetic sampling of low particulate matter (PM) concentrations from stationary sources, such as gas turbines. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
Cooper Environmental’s Xact® 640 is the first Multi-Metals Continuous Emissions Monitor to be proven successful for accurately measuring elemental concentrations in smoke stacks by capturing and measuring both particulate and vapor phase metals. The Xact® 640 system uses reel-to-reel filter tape sampling and nondestructive ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-Sensor Dust Monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zone. Advanced Probe Electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1135 Particulate Mercury Module connects seamlessly to the top of the Model 1130 to continuously monitor ambient air particulate bound mercury (HgP), gaseous oxidized mercury (GOM) and gaseous elemental mercury (GEM). The complete Tekran 2537-1130-1135 Atmospheric Mercury Speciation System provides fully automated, ...
-
Manufactured by Global Spill Controlbased in AUSTRALIA
Application: Disposable particulate filter to protect spill responders from non -toxic ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The PSA L225A200 Sampling System is a simple sampling interface. The sample pathway is constructed entirely from inert plastics and glass for water/waste water samples. Consult P S Analytical for compatibility with more corrosive sample types. The system comprises a plug valve, particulate filter, needle valve and glass separator bowl ...
-
Manufactured by Walker Filtration Ltdbased in UNITED KINGDOM
Available in 2″, 2 1/2″ and 3″ Threaded and DN80 and DN100 Flanged Housings, PRO XF provides a robust and compact range of Particulate Filters that is ideal for use in multi-compressor installations and skid-based packages. Ease of installation and maintenance has been fundamental in the design of PRO XF. A top loading ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you