Particulate Removal Equipment
-
Manufactured by Heumann Environmental Companybased in USA
Wet Scrubbers are devices that utilize some liquid (most often water) to remove contaminants from an exhaust gas stream. Wet scrubbers are most easily categorized by the type of contaminant that they are designed to remove: particulate or ...
-
Manufactured by PetroClearbased in USA
PetroClear models 40510W and 40530W are particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from neat gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel ...
-
Manufactured by PetroClearbased in USA
PetroClear models PCP-E10 and PCP-E30 are particulate removing and water sensing replacement element type filters designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial ...
-
Manufactured by PetroClearbased in USA
PetroClear models PCW-E10 and PCW-E30 are particulate removing and water sensing replacement element type filters designed for aftermarket, cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial ...
-
Manufactured by Xinxiang D. King Industry Co. Ltd.based in CHINA
KODAK / CREO Universal Debris Removal Cabinet Particulate Filter (NEW) - Part #57-8792D-B. Design wind speed of D.King Replacement KODAK 57-8792D-B dust filter elements is more critical parameter, which is related to the effect of running the entire precipitator, under normal circumstances, we recommend that the filter paper containing wood ...
-
Manufactured by Solberg Manufacturing, Inc.based in USA
Solberg’s CSL Series Vacuum Filters are designed for a variety of vacuum processes where harmful particulates are present. Ideal for protecting the inlet of most vacuum pumps, the CSL Series comes standard with a variety of replaceable filter element options that offer superior protection and longevity for the vacuum system. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
This grade of filter media, 200B, is a high efficiency multi-purpose filter material with very good heat resistance. The basis weight and thickness are higher than normal to provide greater filter capacity. This grade is recommended for applications where some depth penetration and lower plugging rates are favored over surface ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
HydroSorb Series Water Absorption Elements filter solid particulates and absorb water from petroleum based fluids. Solid particulates are removed by pleated cellulose filter media which is bonded with water absorbing hydrophilic ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The Amafilter® amaCera ceramic PC filter cartridge is specially designed for the polishing filtration of liquid sulphur. Porous ceramic filters are used for solid particulate removal in liquid and gas applications. These rugged porous ceramic cartridges are manufactured by fusing aluminium oxide grains using a porcelain bond to form a ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
, manganese and hydrogen sulfide in problem water. Trapped particulate is then removed from the media bed during the backwash ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO offers several designs and sizes of seal gas filters for the purposes of particulate and liquid removal. Each one of our units is designed to the requirements provided by the customer. With our many years of experience, we are able to determine the best option for the application whether it is an initial startup or an aftermarket ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by CETCObased in USA
A liquid surfactant, SC-200 is a safe, clean, and cost-effective approach to waterwell development and rehabilitation. This wetting agent enhances the dispersing efficiency of other well rehabilitation products. SC-200 enables these products to enter into the pores and cracks of the encrustations, thereby accelerating the rehabilitation ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications. The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous ...
-
PremiumManufactured by Labconco Corporationbased in USA
filter removes airborne particulates. Users can increase capacity by adding an optional Upper Spindle or Standard Rack. A Lower Standard Rack may be used instead of the Lower Spindle Rack to provide even more ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
The Synspec Cooled Sample Conditioning Unit (Cooled-SCU) is developed for the effective removal of high concentrations of humidity from your sample gas. Heart of the instrument is a cooled loop that removes the humid from the sample gas. All internal tubing of the Cooled-SCU is made of inert materials, making this Cooled-SCU in particular ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you